This Key Digital KD-X40MRX 4K/18G Rx (40m) with L/R Audio De-Embed is a 4K/UHD, HDCP2.2 compliant HDBaseT receiver with 18Gbps bandwidth for extension of digital video signals with the latest standards in resolution, HDR, and Chroma.
KD-X40MRx is sold a la carte to natively integrate with Key Digital HDBaseT wall-plate transmitters, KD-X2x1WDTx or KD-X2x1WVTx. KD-X40MRx provides power to the wall plate transmitter, and de-embed the incoming audio signal for ease of integrating the selected wall plate source with audio systems.
In addition to AV signals, KD-X40MRx extends IR and RS-232 for controlling remotely located equipment.
Key Digital KD-X40MRX 4K/18G HDBT Rx (40m) with L/R Audio De-Embed, IR, RS-232 (Receiver Only) Features:
- Tx Options: Sold a-la-carte to integrate natively with KD-X2x1WDTx and KD-X2x1WVTx wall-plate transmitters (sold separately).
- Flexible Power over HDBaseT: Rx powers Tx when integrated with KD-X2x1WDTx / KD-X2x1WVTx. Rx is powered by Tx when integrated with KD-PS42 / KD-UPS42
- Audio De-embedding: Audio of the incoming source is de-embedded at the unit's analog L/R audio connection for ease of integration with audio systems
- CEC Manager: Passes through CEC control signals for monitors & projectors when integrated with KD-PS42 / KD-UPS42.
- Ultra HD/4K: Supports up to 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth)
- 4K Support: 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps bandwidth)
- Low Profile: Super slim chassis design
- Signal Extension: For resolution and cable quality
- 4K/UHD (18G): Up to 40m / 131ft
- 1080p: Up to 70m / 230ft
- 10G Pass-thru: Mode enables uncompressed 10.2Gbps signal extension
- HDR10 and Dolby Vision: More life-like images through a greater range of luminance levels
- HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant
- Deep Color Support: Up to UHD/4K 30Hz 4:4:4/12 bits or 60Hz 4:4:4/8 bit
- IR Sensor: Sensor powering via +5V on IR In ports collects line-of-sight IR from remote(s) without external IR connecting block
- Up/Down IR: Two channels of IR enable control to/from devices or control systems connected to Tx and Rx units
- RS-232: Bi-Directional control to/from Tx and Rx unit on Phoenix connector
Why not buy this Key Digital KD-X40MRX 4K/18G HDBT Rx (40m) with L/R Audio De-Embed, IR, RS-232 (Receiver Only) today?
Key Digital KD-X40MRX Application Example
Why not buy this Key Digital KD-X40MRX 4K/18G HDBT Rx (40m) with L/R Audio De-Embed, IR, RS-232 (Receiver Only) today?
How far can the KD-X40MRX extend 4K and 1080p signals, and what cable does it use?
A: The KD-X40MRX extends 4K/UHD signals at up to 18Gbps over CAT6 HDBaseT up to 40m, or 1080p up to 70m / 230ft. Extension distance depends on resolution and cable quality.
Which 4K resolutions, refresh rates, and color depths are supported?
A: It supports 3840×2160 and 4096×2160 at 24, 25, 30, and 60Hz with 4:4:4 chroma, within an 18Gbps bandwidth limit. Deep Color support reaches 4K 30Hz at 4:4:4/12-bit or 4K 60Hz at 4:4:4/8-bit.
Does the receiver support HDR and HDCP-protected sources?
A: Yes. The KD-X40MRX supports HDR10 and Dolby Vision, along with HDCP 2.2 and backward HDCP compatibility.
Which end of the HDBaseT link supplies power?
A: With a KD-X2x1WDTx or KD-X2x1WVTx wall-plate transmitter, the receiver supplies power to the transmitter over HDBaseT. With a KD-PS42 or KD-UPS42, the receiver instead receives power from the transmitting device.
How can I connect the incoming source audio to a separate sound system?
A: The receiver de-embeds incoming source audio to an analog L/R output for connection to an audio system. The audio connector is a 3.5mm stereo female jack.
What remote-control connections are available across the HDBaseT link?
A: Two IR channels support control to and from equipment at the transmitter and receiver ends, while bidirectional RS-232 uses a 3-pin Phoenix connector. The IR input supplies +5V for an IR sensor without an external IR connecting block.
Can CEC commands pass through to a monitor or projector?
A: Yes. CEC control signals pass through to monitors and projectors when the KD-X40MRX is integrated with a KD-PS42 or KD-UPS42.
Is the KD-X40MRX suitable for a meeting room with a wall-plate transmitter?
A: Yes. It integrates natively with the separately sold KD-X2x1WDTx and KD-X2x1WVTx wall-plate transmitters to deliver the selected source to an HDMI display.
Is this receiver suitable for an installation with limited mounting space?
A: Its low-profile chassis measures 5.35 × 3.95 × 0.90 inches and weighs 0.40 pounds. Check these dimensions against your available mounting space.
Is the KD-X40MRX suitable for a system that needs uncompressed 10.2Gbps signal extension?
A: Yes. Its 10G Pass-thru mode enables uncompressed 10.2Gbps signal extension.
Videos Hide Videos Show Videos
-
Key Digital KD-X40MRX 4K/18G Rx (40m) with L/R Audio De-Embed
Visit: https://www.hdtvsupply.com/key-digital-kd-x40mrx.html ...
-
Key Digital KD-X40MRX 4K/18G Rx (40m) with L/R Audio De-Embed
Learn more or order now: https://www.hdtvsupply.com/key-digita...
-
Conference Room Solutions
Key Digital® and Compass Control® will transform your conferen...
-
Unboxing: KD-IP1080Tx – Enterprise AV over IP 1080p Encoders/Decoders
KD-IP1080Tx – Enterprise AV over IP with POE (TX) Transmitter ...
-
KD-IP1080Tx/KD-IP1080Rx – Enterprise AV over IP 1080p Encoders/Decoders
KD-IP1080Tx - Enterprise AV over IP with POE (TX) Transmitter...
-
KD-IP1080Tx/KD-IP1080Rx/KD-CX800 – Enterprise AV over IP Solutions
KD-IP1080Tx - Enterprise AV over IP with POE (TX) Transmitter...

