This KanexPro HDSC61D-HDMI over HDBaseT Extender Set with Loop Out (492') enables extending transmission of HD signals to up to 492'. It is well suited for use in digital signage applications, as well as for sending HDMI signals in healthcare AV facilities, control rooms, educational facilities, airports, and even in home theater installations. This unit consists of both the transmitter and receiver and it supports HD video. Following the HDBaseT protocol allows the transmitter and receiver to support PoH (Power over HDBaseT), which allows you to power both transmitter and receiver using only the one included power supply.
The EXT-HDBT150M transmitter/receiver is compliant with HDCP 1.4 and EDID enabling it to support HDMI content. 225 MHz of bandwidth allows it to easily support signals up to 1080p 60 Hz, at distances up to 492'. The pair supports bidirectional RS-232 and IR control. They are Dolby TrueHD and DTS Master Audio ready and supports LPCM Audio. They also feature LED indicator lights for power, signal (link), and HDCP. Included with the pair are an IR Emitter Cable, an IR receiver cable, and a power supply.
KanexPro EXT-HDBT150M HDMI over HDBaseT Extender Set with Loop Out (492')
- Used to extend transmission distances for HDMI signals up to 492' over a single Cat 5e/6 cable.
- It supports control over RS-232 and IR
- The pair includes both an IR emitter and receiver cable. This allows you to control a device at the receiver end of the cable run from the transmitter
- Receiver can be powered directly by a power supply, or by Power over HDBaseT from the transmitter
- HDCP 1.4 and EDID compliant
Why not buy this KanexPro EXT-HDBT150M HDMI over HDBaseT Extender Set with Loop Out (492') today?
KanexPro EXT-HDBT150M HDMI over HDBaseT Extender Set with Loop Out (492')
- Chassis: Metal enclosure
- Interface
- Transmitter Input: HDMI: 1 x type A
- Transmitter Output
- HDMI: 1 x type A (for loop or local output)
- HDBaseT: 1 x RJ45
- Transmitter Control Ports
- RS-232: 3-pin captive screw connector
- IR: 3.5 mm stereo jack
- Receiver Input: HDBaseT: 1 x RJ45
- Receiver Output: HDMI: 1 x type A
- Receiver Control Ports
- RS-232: 3-pin captive screw connector
- IR: 3.5 mm stereo jack
- Video Signal
- Input: HDMI 1.4
- Output: Digital audio transmitted through HDMI audio
- Audio Signal: Digital audio transmitted through HDMI audio
- Resolutions: 1080p 60(max)
- Color Space
- RGB 4:4:4
- YUV 4:4:4
- YUV 4:2:2
- Bit Depth: Color: 8-bit
- Transmission Mode: HDBaseT
- Transmission Distance: 492' / 149.96 m
- Bandwidth: 225 MHz/channel
- HDMI Standards
- HDMI 1.4
- HDCP 1.4
- HDMI Audio
- LPCM 2/5.1/7.1 channel, Dolby Digital
- DTS 5.1, Dobly Digital+, Dolby True HD
- DTS-HD Master Audio
- Dolby Atmos
- DTS:X
- Power Consumption: 6 W
- Power Supply
- Input: 100 to 240 VAC, 50/60 Hz
- Output: 24 VDC, 1 A
- Environmental
- Operating: 32 to 140˚F / 0 to 60˚C
- Storage: -4 to 140˚F / -20 to 60˚C
- Relative Humidity: 20 to 90% (non condensing)
- Mechanical
- ESD Protection: Human Body Model
- ±8 kV (air-gap discharge)
- ±4 kV
- Dimensions: 5.51 x 2.55 x 0.7" / 14 x 6.48 x 1.78 cm (each)
- Weight: 0.9 lb / 0.4 kg
HDTV Supply includes a 3 Year Limited Warranty on all Kanex Pro products. The warranty states that (a) its products (the will perform substantially in accordance with the accompanying written materials for a period of 3 years from the date of receipt and (b) that the Product will be free from defects in materials & workmanship under normal use & service for a period of 3 years. In order to get a warranty replacement for a defective item, HDTV Supplys and Kanex Pros Support Team will verify the product is eligible for warranty. An RMA number will then be issued. Shipped replacements will be in like new conditions, tested and all components included.
HDTV Supply also sells a 5 Year Extended U.S. Warranty for this Long-Runner HDMI 100M Extender. Please go to Extended Warranties or see the above Options to purchase it.
