HDTV Supplys WolfPack 1x2 HDMI Splitter Over CAT5 w/Bidirectional IR sends both an HDMI audio and a 1080p HDMI video signal from one location to another locations with standard, inexpensive and reliable CAT5e or CAT6 cables to upwards of 150 feet. The WolfPack 1x2 HDMI Splitter with Bi-Directional IR is easy and hassle-free to install with no software installation required. This HDMI Extender over CAT5 with Bi-Directional IR is a one-way HDMI splitter & distributes 1-HDMI input to and identical CAT5 signals. The outputs are synchronized and only one CAT5e/6 cables is required going to the TVs. The HDMI Extender over CAT5 with Bi-Directional IR includes a chip to makes sure the sound and the picture are in sync and no delays occur between them. Bidirectional Remote Control allows control from every TV & source so to change the source parameters and turn the TVs off.

The WolfPack HDMI Extender over CAT5 with Bi-Directional IR supports up to 1080p resolutions and digital audio, including DTS Digital, DTS-HD Master Audio, and Dolby TrueHD. It also supports up to 8-bits per channel (24-bit total) Deep Color and HDCP pass-through. This HDMI Extender over CAT5 with Bi-Directional IR has the ability to pre-emphasis and equalization the HDMI signal. Series connection of 1X4 HDMI Splitter over CAT5 achieves long distance transmission of an HDMI signal of more than 15 meters. Each receiver works with the splitter as a full functional module to extend the HDTV display up to >100 feet for 1080p. It supports 1080p TV′s at 24/30/60/100/200/240 Hz and above as well as Blu-rays at 24 FPS.

NOTE: The unique feature of the WolfPack 1x2 HDMI Splitter Over CAT5/6 w/Bidirectional IR is:

You can control the source device from both destinations via IR or
Control the TVs from where the source is via IR.

HDMI Extender over CAT5 with Bi-Directional IR Features:

Each set includes one transmitter and one receiver
Transmit Over 50m single CAT5e/6 without signal loss
Support 1xLoop HDMI output on the transmitter
Support high definition resolution up to Full HD 1080p
Support Dolby True-HD, DTS-HD Master audio
EDID reading and saving from display
With Bi-Direction wideband IR (38~56 kHz)
Support 3D
DC 5V 1A power supply

Why not buy this HDMI Extender over CAT5 with Bi-Directional IR today?

HDMI Extender over CAT5 with Bi-Directional IR Specification:

Operating Temperature Range: -5 to +35DegC(+23 to +95 DegF )
Operating Humidity Range: 5 to 90%RH (No Condensation)
Data transfer speed: 6.75Gbps
Connectors on Transmitter:

HDMI Receptacle x 2 (1xHDMI input, 1xHDMI loop output)
RJ45 Receptacle x 1
Power DC Receptacle x 1
IR Receptacle x 2(for IR TX and RX cable)

Connectors on Receiver:

HDMI Receptacle x 1
RJ45 Receptacle x 1
Power DC Receptacle x 1
IR Receptacle x 2(for IR TX and RX cable)

Resolution outputs: 1080p/1080i/720p/576p/480p
Audio format supported: DTS-HD Master Audio, Dolby True HD, multi-channel 5.1, stereo etc
Output Video Signal: HDMI
Dimension (LxWxH): TX: L127.1xW70.6xH28.2mm, RX: L85xW65xH24mm
Power supply: DC 5V Power supply
Power consumption: 3.5W(MAX)
Transmission Distance: 1080p up to 50m (1)
Net Weight: 480g (1 Pair)
IR wavelength & frequency: Wavelength: 940nm IR Frequency: 38KHz - 56KHz