This DVIGear DVI-7520-Rx HDMI HDBaseT Extender - Receiver

Multiple Signals Over One Cable — DVIGear’s DVI-7520 utilizes HDBaseT™ technology to provide a simple and cost-effective solution for extension of uncompressed HDMI or DVI, embedded audio, bidirectional IR, and RS-232 using a single twisted pair CAT-X cable.

Feature-Rich, Future-Proof — Unlike other products, this extender supports a wide range of HDBaseT features, including: support for 4K/30p (UHD) resolution, bidirectional IR, POH and long-range operation. It supports extension of HDMI signals with 1080p resolution up to 230 ft. (~ 70 meters) and 4K (UHD) resolution up to 130 ft. (~ 40 meters).

Power Over HDBaseT (POH) — Today there are many HDBaseT products on the market that utilize non-standard implementations of power over the HDBaseT link. This problem has created numerous interoperability challenges for system integrators who are faced with HDBaseT products that do not work with each other or, in some cases, actually cause equipment failures. To solve this problem, DVIGear’s DVI-7520 includes a fully-compliant implementation of Power over HDBaseT (POH), a key component of the HDBaseT standard. For POH operation, the transmitter unit acts as a PSE device and provides standardized 48 VDC power, as well as a sophisticated handshake feature that prevents power exchange with incompatible devices. The receiver unit operates as a PD device and accepts POH from the transmitter, thereby eliminating the need for a cumbersome wall mount power supply unit (PSU). For non-POH operation, the receiver unit can be powered using an optional PSU.

Exceptional Value — The DVI-7520 delivers a powerful combination of advanced features and unmatched performance at a very attractive price point, which makes it a true break-through in value for professional AV system integrators. This makes it ideally suited for a wide range of digital display applications, including rental & staging events, conference and training rooms, boardrooms, auditoriums, hotels, churches and other demanding environments.

DVIGear DVI-7520-Rx HDMI HDBaseT Extender - Receiver Features:

Extends HDMI, RS-232, and bidirectional IR over a single CAT-X cable
Supports 4K resolutions up to 4096x2160 / 30p
Supports HDBaseT POH standard with remote power from TX to RX unit over the CAT-X cable
Fully HDCP compliant, EDID and CEC transparent
Extends 1080p HDMI signals up to 230 ft. (~70 meters)
Extends 4K (UHD) HDMI signals up to 130 ft. (~40 meters)
Multiple extender pairs can be cascaded for applications that require extreme distances
Heavy-duty mounting brackets are included

Why not buy this DVIGear DVI-7520-Rx HDMI HDBaseT Extender - Receiver today?

DVIGear DVI-7520-Rx HDMI HDBaseT Extender - Receiver Specifications:

Performance
Video: Supports HDMI v1.4, HDCP, and CEC
HDBaseT Classification Type: HDBaseT Class B
Audio: Supports HDMI embedded audio: up to 7.1 PCM, Dolby Digital TrueHD, and DTS-HD Master Audio
HDCP: Supports HDMI signals with or without HDCP encryption
Control: Supports bidirectional IR and RS-232 pass-through
Power: Supports local 12VDC power, as well as 48 VDC POH (Tx unit to Rx unit)
EDID: EDID of connected display is transparent
Cable Equalization: Automatic, adaptive
Supported HDTV Formats: Supports HDTV resolutions up to 4096x2160 (4K)
Supported PC Resolutions: Supports all single-link DVI resolutions up to 1600x1200 and 1920x1200,
HDMI resolutions up to 4096x2160 (4K)
Input DDC Signal: 5.0 Vpp (TTL)
Input Video Signal: 0.5 to 1.0 Vpp
IR Carrier Frequency Range: 33-55 kHz @ 5 volts
RS-232 Baud Rate: Up to 115,200 baud
Connections / Indicators
HDMI Input / HDMI Output: 1x 19-pin Female HDMI connector
HDBaseT Interface: 1x RJ45 with 48 VDC POH
IR Remote Control:
- 1x IR IN: 3.5mm Stereo Mini-Jack
- 1x IR OUT: 3.5mm Mini-Jack
RS-232: 1x 3-pin phoenix connector
Power: 1x Screw-locking 5.5 mm / 2.0 mm female connector
Diagnostic Indicators: Power, Status, Link, and HDCP LEDs
HDBaseT
Category Cable Type:
- Recommended: CAT6A S/FTP (550 MHz) AWG 23,
- Required: CAT5e or better
- Compliant with TIA/EIA-568B termination standard
Max. Extension Distance (1):
- up to 230 ft. (70 meters) @ 1920x1080 / 60p / 36-bit
- up to 130 ft. (40 meters) @ 4096x2160 / 30p, 1920x1080 / 60p / 48-bit, and 1920x1080 / 120p
Maximum Pixel Clock Frequency: Supports pixel clock rates up to 340 MHz
Maximum Video Bit Rate: Supports digital signal bit rates up to 3.4 Gbps./color, 10.2 Gbps. total
Gain: 0 - 10 dB @ 100 MHz
Resolution Range: 800x600 – 1920x1200, 4096x2160 / 30p
Signal to Noise Ratio (SNR): > 70 dB @ 100 MHz over 70 meters cable length
Return Loss: < -30 dB @ 5 KHz
Total Harmonic Distortion (THD): < 0.005% @ 1 KHz
Min. / Max. Signal Level: < 0.3 Vpp / 1.45 Vpp
Differential Phase Error: ±10° @ 135 MHz over 70 meters cable length
Propagation Delay: < 7 μs @ 70 meters
Power Over HDBaseT (POH): Fully-compliant implementation of Power over HDBaseT (POH). Tx unit is a PSE device and Rx unit is a PD device.
Power
Power Consumption: Tx Unit: 10.8 watts (Maximum)
Rx Unit: 10.8 watts (Maximum)
Remote Power: 48 VDC POH from Tx unit to Rx unit
External AC Power Adapter: Input: 100-240VAC, 50-60Hz / Output: +12VDC @ 1.5A
ESD Protection: ± 15 kV
Mechanical
Construction: Heavy-duty steel enclosure with jet black finish
Dimensions (W x D x H): Each Unit: 6.8" x 3.9" x 1.0" (173.1 mm x 100.1 mm x 25.6 mm)
Weight:
- Tx Unit: 14.5 oz. (411 grams)
- Rx Unit: 15.1 oz. (428 grams)
Environmental
Operating Temperature (Environment): +32° to +95° F (0° to +35° C)
Typical Case Temperature: Tx Unit: 98.6° F (37° C) Rx Unit: 105.8° F (41° C) (Ambient Environment 30° C, 10 Hours)
Storage Temperature (Environment): -4° to +158° F (-20° to +70° C)
Operating / Storage Humidity: 10% to 90% (non-condensing)
Regulatory Approvals
Tx / Rx Units: FCC, CE, RoHS
External AC Power Adapter: FCC, CE, UL, C-UL, CEC, GS, PSE, RoHS
Warranty
Limited Warranty: 3 Years Parts and Labor
Model Numbers
DVI-7520: HDBaseT HDMI Extender Set, 70m
DVI-7520-Rx: HDBaseT HDMI Transmitter, 70m
DVI-7520-Rx: HDBaseT HDMI Receiver, 70m

Accessories Included

1x User Guide
1x External AC Power Adapter
1x IR Transmitter
1x IR Receiver
2x 3-pin RS-232 Phoenix Connectors
4x Mounting Brackets with Screws
2x HDMI Jack Screws
Optional Accessories
- Additional AC Power Adapter with USA, Euro, UK, or Australia Plugs (DVI-7520-PS), IR Receiver (DVI-7360-IR-RX), IR Transmitter (DVI-7360-IR-TX), 19" Rack Mount Kit (DVI-7520-RMK)