This DVIGear DVI-7320-Rx 1x LC HDMI 4K/60p Fiber Optic Receiver converts the light pulses back to a DVI signal for display on a monitor or projector. A programmable memory chip provides EDID support for any display without the need for a copper cable. The unit also provides a DDC link that supports live EDID / HDCP communications using a standard CAT5 cable. These features make the DVI-7320 the ideal solution for critical display applications that require flawless DVI signal quality over very long cable runs.
DVIGear DVI-7320-Rx 1x LC HDMI 4K/60p Fiber Optic Receiver Features:
- Extends single-link and dual-link DVI signals
- Supports HDTV resolutions up to 2048x1080 pixels
- Supports PC resolutions up to 3840x2400 pixels
- Supports digital bit-rates up to 3.3 GBit/sec.
- Low RFI / EMI profile for sensitive applications
- HDCP Compliant
- Optical fiber transmission is immune to environmental signal noise.
- EDID supported via direct DDC connection or by built-in EDID memory
- Transmitter unit can be powered by DVI source or by optional +5VDC external power supply.
- Receiver unit is powered by +5VDC external power supply.
Why not buy this DVIGear DVI-7320-Rx 1x LC HDMI 4K/60p Fiber Optic Receiver from HDTV Supply today?
DVIGear DVI-7320-Rx 1x LC HDMI 4K/60p Fiber Optic Receiver Specifications:
| Connections: | |
| DVI Input / DVI Output | 29-pin Female DVI Connectors |
| Optical | 7x LC type fiber optic connectors (R1, G1, B1, R2, G2, B2, Clock) |
| DDC | RJ-45 jack |
| Power | 5.5mm jack |
| Resolution: | |
| PC | Supports all Single-Link resolutions up to 1600x1200 and 1920x1200 Supports all Dual-Link DVI resolutions up to 3840x2400 (WQUXGA displays) |
| HDTV | Supports HDTV resolutions up to 1080p and 2048x1080 |
| Bandwidth: | |
| Pixel Rates | Supports Pixel clock rates up to 330 MHz |
| Bit Rates | Supports digital signal bit rates up to 3.30 GBit/sec |
| Optical: | |
| Optical Transmitter | VCSEL Lasers, Class 1 laser product |
| Optical Receiver | PIN Photo Diodes |
| Fiber Cable | 50/125μ LC multi-Mode Optical Fiber with 7x LC connectors per module |
| DVIGear Fiber Cable | OFNP, Plenum Rated PVC Jacket, Diameter 5.0 mm (data available upon request) |
| Maximum Cable Length | Real EDID Mode: 100 m / 328 ft. EDID Emulation Mode: 500 m / 1640 ft. |
| DDC Support: | |
| EDID Support | An EDID memory built into the Tx module can learn and store the display's EDID info, thereby eliminating the need for a DDC connection using copper cables. |
| HDCP Support | HDCP communications are supported using optional DDC link over a CAT5 cable. |
| Power: | |
| Optical Transmitter | Tx module requires at least 300 ma of DC current from pin 14 of DVI (source) connector. Optional external power supply may be used if needed. |
| Optical Receiver | Must be powered using the supplied external power supply |
| External Power Supply | Input: 100-240VAC, 50-60Hz 0.5A / Output: +5VDC @ 2.0A |
| Power Consumption | Maximum: 3.0 watts (for both Tx and Rx units) |
| Mechanical: | |
| Construction | Rugged metal enclosure with jet black finish |
| Dimensions (L x W x H) | 7.05" x 3.56" x 1.31" (179.1 mm x 90.3 mm x 33.3 mm) |
| Weight | Tx Unit: 1.02 lb. (462g) Rx Unit: 1.02 lb. (462g) |
| Environmental: | |
| Storage | -4° to +158° F. | -20° to +70° C. |
| Operation | +32° to +122° F. | 0° to +50° C. |
| Relative Humidity | 10% to 90% |
