This DVIGear DVI-7380-Tx DisplayPort 1.4 Fiber Optic Extender - Transmitter, 1x LC
Designed for Extreme Requirements — The DVI-7380 is a high-performance, cost-effective, DisplayPort Optical Extender designed to meet and exceed even the most demanding system requirements. It supports a wide array of signal types, provides long-distance extension over a single fiber cable, and supports ultra-high resolutions up to 8K (UHD) at 30Hz (4:4:4).
Multiple Signals Extended over a Single Cable — This extender supports DisplayPort signals with resolutions up to 8K /30p (HBR3), embedded audio, bi-directional IR, RS-232 and two 10/100 BaseT Ethernet ports, using only a single fiber optic cable. It can extend these signals over cable distances of more than 5.0 miles (> 8,000 meters) using Single Mode optical fiber.
Advanced Fiber Optic Technology — Each extender set consists of an optical transmitter unit and an optical receiver unit. The transmitter converts the AV signals into light pulses for transmission over a single strand of Multi-Mode or Single-Mode fiber optic cable. The receiver converts the light pulses back to AV signals for the display, as well as other downstream devices. By using advanced fiber optic technology, without any compression, this product provides superior picture quality over greater distances than other extension methods, such as copper cables or CAT-X extenders. Together, these features make the DVI-7380 the ideal cost-effective solution for system designers and integrators who need to extend high resolution DisplayPort signals over extreme distances with flawless image quality.
DVIGear DVI-7380-Tx DisplayPort 1.4 Fiber Optic Extender - Transmitter, 1x LC Features:
- Supports resolutions up to 7680 × 4320 /30p (4:4:4), without using compression
- Supports up to HBR3 data rates
- Extends DisplayPort, Ethernet (10/100Base-T), RS-232, and bidirectional IR over a single strand of fiber optic cable
- HDCP 1.4 and HDCP 2.2 compliant
- Heavy-duty mounting brackets are included
- Maximum extension distances:
- Single-Mode Fiber: > 5.0 miles (~ 8,000 m)
- OM3 Multi-Mode Fiber: > 1,000 ft. (~ 300 m)
- Optical fiber transmission is immune to environmental signal noise
- Low RFI / EMI profile for sensitive applications
- Locking DC power connectors for added security and reliability
Why not buy this DVIGear DVI-7380-Tx DisplayPort 1.4 Fiber Optic Extender - Transmitter, 1x LC today?
DVIGear DVI-7380-Tx DisplayPort 1.4 Fiber Optic Extender - Transmitter, 1x LC Specifications:
- Performance
- Standards Compliance: DisplayPort v 1.4, HDCP 1.4 / 2.2
- Maximum Video Bit Rate: Supports HBR3 data rates: 4x Lanes @ 8.1Gbps, 32.4Gbps aggregate
- Ethernet: 10/100 BaseT
- Supported Color Depth: Up to 48-bits per pixel
- Supported Resolutions: Up to 8K: 7680 x 4320 / 30Hz (4:4:4)
- Digital Audio Support: Up to 32 channels of inline 24-bit, 1536 kHz uncompressed PCM audio
- Connections
- DisplayPort Input / Output: 1 ea. 20-pin female DisplayPort connector
- Optical: 1 ea. LC fiber optic connector
- Ethernet: 2 ea. RJ-45 female connector
- RS-232: 1 ea. 3-pin Phoenix connector
- IR Input / IR Output:
- IR IN: 1 ea. 3.5mm stereo mini-jack
- IR OUT: 1 ea. 3.5mm mini-jack
- Power: 1 ea. Screw-Locking 2.1 / 5.5 mm female connector
- AUX Channel Support
- AUX Channel Communications: Supports bidirectional communications for EDID, HDCP, Link Training, etc.
- AUX Channel Data Rate: 1 Mbps
- LED Indicators
- TX / RX Units: Front Panel LEDs: for Power, Optical Link, Status, HPD and Ethernet
- Optical
- Optical Technology: CWDM (Coarse Wavelength Division Multiplexing) using 6 optical wavelengths
- Laser Diodes: 1270 / 1290 / 1310 / 1330nm 10Gbps CWDM DFB Lasers
- 1490nm / 1550nm 2.5Gbps CWDM DFB Lasers
- Photo Diodes: 1100 – 1620nm PIN Photo Detectors
- WDM Filter Wavelengths: 1270nm / 1290nm / 1310nm / 1330nm / 1490nm / 1550nm
- Optical Wavelengths / Actual Data Rates:
- DisplayPort Lanes: 1270nm / 1290nm / 1310nm / 1330nm = 8.1Gbps
- AUX Channel, IR, RS-232, Ethernet Signals: 1490nm / 1550nm = 1.25Gbps
- Optical Link Power Budget: 8.0 dB (minimum)
- Cable
- Maximum Cable Length
- (typical):
- 9/125μ Single-Mode Fiber: > 5.0 miles ( ~ 8,000 meters)
- 50/125μ OM3 Multi-Mode Fiber: > 1,000 ft. ( ~ 300 meters)
- DVIGear Fiber Cable: OFNP, Plenum rated – additional data and custom lengths available on request
- Cable Jacket: OFNP, Plenum rated, Black PVC Jacket
- Cable Outside Diameter: 0.2" (4.4 mm)
- Mechanical
- Case Dimensions (H x W x D):
- Without Brackets: 1.0" x 7.5" x 3.9" (26.0 mm x 190.0 mm x 99.5 mm)
- Width with Brackets: 8.5" (215.5 mm)
- Weight: TX Unit: 568g / RX Unit: 563g
- Construction: High-impact metal enclosure with jet black finish
- Mounting Options: Mounting Brackets are included
- Environmental
- Operating Temperature: 14° to +158° F (-10° to +70°C)
- Storage Temperature: -40° to +185° F (-40° to +85°C)
- Operating Humidity: 5% to 80% (non-condensing)
- Storage Humidity: 5% to 95% (non-condensing)
- Power Requirements
- Optical Transmitter / Receiver: Both TX and RX units must be powered by the supplied external power adapters
- External AC Power Adapters:
- Model No: DVI-7216-PS
- Input: 100-240VAC / 50-60Hz 0.8A
- Output: 12VDC, 2.0A
- Maximum Power Consumption: DVI-7380-TX: 530 mA (6.0 watts); DVI-7380-RX: 450 mA (5.4 watts)
- Regulatory Approvals
- Fiber Optic Extender Unit: FCC Class B, CE, RoHS
- Laser: US-FDA CDRH Class 1
- External AC Power Adapters: FCC, CE, UL, C-UL, BSMI, CB, CCC, LVD, LPS, PSE, RCM, RoHS, WEEE
- Warranty
- Limited Warranty: 3 Years Parts and Labor
- Model Numbers(1)
- DVI-7380-TX: DisplayPort 1.4 Fiber Optic Transmitter, 1x LC
- DVI-7380-RX: DisplayPort 1.4 Fiber Optic Receiver 1x LC
- DVI-CUST-OPT:
- Custom Fiber Optic Cable, Plenum-rated,
- Specify: Length, Fiber Type (MMF, SMF) and Optical Connector (LC)
Accessories Included(1)
- 1x External AC Power Adapter (DVI-7216-PS) with USA plug
- 1x User Guide
- 1x 3-Pin Phoenix Connectors (Phoenix p.n. 1840379)
- 1x IR Transmitter (DVI-7360-IR-TX) (ships with DVI-7380-TX)
- 1x IR Receiver (DVI-7361-IR-RX) (ships with DVI-7380-RX)
- 2x Mounting Brackets with Screws
- Optional Accessories
- External AC Power Adapter (p.n. DVI-7216-PS) with Euro, UK, or Australia plugs
- +12 VDC Power Distribution Unit (p.n. DVI-7520-PDU)
- Custom Optical Cables (contact DVIGear for details)
Why not buy this DVIGear DVI-7380-Tx DisplayPort 1.4 Fiber Optic Extender - Transmitter, 1x LC today?
DVIGear DVI-7380-Tx User Guide
DVIGear DVI-7380-Tx Specifications
