This DVIGear DVI-7320-Tx 1x LC HDMI 4K/60p Fiber Optic Transmitter converts DVI input signals into light pulses for transmission over 7 strands of multi-mode fiber optic cable.
A programmable memory chip provides EDID support for any display without the need for a copper cable.
The unit also provides a DDC link that supports live EDID / HDCP communications using a standard CAT5 cable.
These features make the DVI-7320 the ideal solution for critical display applications that require flawless DVI signal quality over very long cable runs.
DVIGear DVI-7320-Tx 1x LC HDMI 4K/60p Fiber Optic Transmitter Features:
- Extends single-link and dual-link DVI signals
- Supports HDTV resolutions up to 2048x1080 pixels
- Supports PC resolutions up to 3840x2400 pixels
- Supports digital bit-rates up to 3.3 GBit/sec.
- Low RFI / EMI profile for sensitive applications
- HDCP Compliant
- Optical fiber transmission is immune to environmental signal noise.
- EDID supported via direct DDC connection or by built-in EDID memory
- Transmitter unit can be powered by DVI source or by optional +5VDC external power supply.
- Receiver unit is powered by +5VDC external power supply.
Why not buy this DVIGear DVI-7320-Tx 1x LC HDMI 4K/60p Fiber Optic Transmitter from HDTV Supply today?
DVIGear DVI-7320-Tx 1x LC HDMI 4K/60p Fiber Optic Transmitter Specifications:
| Connections: | |
| DVI Input / DVI Output | 29-pin Female DVI Connectors |
| Optical | 7x LC type fiber optic connectors (R1, G1, B1, R2, G2, B2, Clock) |
| DDC | RJ-45 jack |
| Power | 5.5mm jack |
| Resolution: | |
| PC | Supports all Single-Link resolutions up to 1600x1200 and 1920x1200 Supports all Dual-Link DVI resolutions up to 3840x2400 (WQUXGA displays) |
| HDTV | Supports HDTV resolutions up to 1080p and 2048x1080 |
| Bandwidth: | |
| Pixel Rates | Supports Pixel clock rates up to 330 MHz |
| Bit Rates | Supports digital signal bit rates up to 3.30 GBit/sec |
| Optical: | |
| Optical Transmitter | VCSEL Lasers, Class 1 laser product |
| Optical Receiver | PIN Photo Diodes |
| Fiber Cable | 50/125μ LC multi-Mode Optical Fiber with 7x LC connectors per module |
| DVIGear Fiber Cable | OFNP, Plenum Rated PVC Jacket, Diameter 5.0 mm (data available upon request) |
| Maximum Cable Length | Real EDID Mode: 100 m / 328 ft. EDID Emulation Mode: 500 m / 1640 ft. |
| DDC Support: | |
| EDID Support | An EDID memory built into the Tx module can learn and store the display's EDID info, thereby eliminating the need for a DDC connection using copper cables. |
| HDCP Support | HDCP communications are supported using optional DDC link over a CAT5 cable. |
| Power: | |
| Optical Transmitter | Tx module requires at least 300 ma of DC current from pin 14 of DVI (source) connector. Optional external power supply may be used if needed. |
| Optical Receiver | Must be powered using the supplied external power supply |
| External Power Supply | Input: 100-240VAC, 50-60Hz 0.5A / Output: +5VDC @ 2.0A |
| Power Consumption | Maximum: 3.0 watts (for both Tx and Rx units) |
| Mechanical: | |
| Construction | Rugged metal enclosure with jet black finish |
| Dimensions (L x W x H) | 7.05" x 3.56" x 1.31" (179.1 mm x 90.3 mm x 33.3 mm) |
| Weight | Tx Unit: 1.02 lb. (462g) Rx Unit: 1.02 lb. (462g) |
| Environmental: | |
| Storage | -4° to +158° F. | -20° to +70° C. |
| Operation | +32° to +122° F. | 0° to +50° C. |
| Relative Humidity | 10% to 90% |
Why not buy this DVIGear DVI-7320-Tx 1x LC HDMI 4K/60p Fiber Optic Transmitter from HDTV Supply today?
Why not buy this DVIGear DVI-7320-Tx 1x LC HDMI 4K/60p Fiber Optic Transmitter from HDTV Supply today?
1.What video connector types does the DVI-7320-Tx use for signal and fiber connections?
A: The transmitter uses 29-pin female DVI connectors for DVI input/output and seven LC-type fiber optic connectors labeled R1, G1, B1, R2, G2, B2, Clock for optical transmission.
2.Does the DVI-7320-Tx provide EDID and DDC support?
A: Yes; it has a built-in EDID memory in the transmitter that can learn and store a display's EDID, and a DDC link is available via an RJ-45 jack for live EDID/HDCP communications.
3.What are the power requirements for the transmitter and receiver units?
A: The transmitter requires at least 300 mA DC from pin 14 of the DVI source connector but can use an optional external +5VDC supply; the receiver must be powered using the supplied external power supply (external supply output: +5VDC @ 2.0A).
4.What fiber cable type and connector does the DVI-7320-Tx use?
A: It uses 50/125μm multimode optical fiber with LC connectors and supplies modules with seven LC connectors per module.
5.How far can the DVI-7320-Tx transmit video over fiber?
A: Maximum cable length is 100 m (328 ft) in Real EDID Mode and up to 500 m (1,640 ft) in EDID Emulation Mode.
6.Can I power the transmitter directly from my DVI source?
A: Yes, the transmitter can draw power from the DVI source but it requires at least 300 mA from pin 14; you may use the optional external +5VDC supply if the source can't provide that current.
7.Will this extender carry HDCP communication to the display?
A: Yes, HDCP communications are supported using the optional DDC link over a CAT5 cable.
8.Can I use this unit to reach a display 300 meters away?
A: Possibly, but only in EDID Emulation Mode — the specification lists EDID Emulation Mode up to 500 m (1,640 ft); Real EDID Mode is limited to 100 m (328 ft).
9.What maximum resolutions and pixel rates does this transmitter support?
A: It supports single-link resolutions up to 1600x1200 and 1920x1200, dual-link DVI resolutions up to 3840x2400, HDTV up to 1080p and 2048x1080, and pixel clock rates up to 330 MHz.
10.Does the optical transmitter use a laser and is it safe for installations?
A: The optical transmitter uses VCSEL lasers and is classified as a Class 1 laser product.
