This DVIGear DVI-7320 1x LC HDMI 4K/60p Fiber Optic Extender is a high-speed fiber optic transport system capable of distributing ultra-high resolution Single-Link or Dual-Link DVI signals over cable lengths up to 500 meters (1,640 ft.) while maintaining flawless image quality.
On the source side, an optical transmitter module converts DVI input signals into light pulses for transmission over 7 strands of multi-mode fiber optic cable.
On the display side, an optical receiver module converts the light pulses back to a DVI signal for display on a monitor or projector.
A programmable memory chip provides EDID support for any display without the need for a copper cable.
The unit also provides a DDC link that supports live EDID / HDCP communications using a standard CAT5 cable.
These features make the DVI-7320 the ideal solution for critical display applications that require flawless DVI signal quality over very long cable runs.
DVIGear DVI-7320 1x LC HDMI 4K/60p Fiber Optic Extender Features:
- Extends single-link and dual-link DVI signals
- Supports HDTV resolutions up to 2048x1080 pixels
- Supports PC resolutions up to 3840x2400 pixels
- Supports digital bit-rates up to 3.3 GBit/sec.
- Low RFI / EMI profile for sensitive applications
- HDCP Compliant
- Optical fiber transmission is immune to environmental signal noise.
- EDID supported via direct DDC connection or by built-in EDID memory
- Transmitter unit can be powered by DVI source or by optional +5VDC external power supply.
- Receiver unit is powered by +5VDC external power supply.
Why not buy this DVIGear DVI-7320 1x LC HDMI 4K/60p Fiber Optic Extender from HDTV Supply today?
DVIGear DVI-7320 1x LC HDMI 4K/60p Fiber Optic Extender Specifications:
| Connections: | |
| DVI Input / DVI Output | 29-pin Female DVI Connectors |
| Optical | 7x LC type fiber optic connectors (R1, G1, B1, R2, G2, B2, Clock) |
| DDC | RJ-45 jack |
| Power | 5.5mm jack |
| Resolution: | |
| PC | Supports all Single-Link resolutions up to 1600x1200 and 1920x1200 Supports all Dual-Link DVI resolutions up to 3840x2400 (WQUXGA displays) |
| HDTV | Supports HDTV resolutions up to 1080p and 2048x1080 |
| Bandwidth: | |
| Pixel Rates | Supports Pixel clock rates up to 330 MHz |
| Bit Rates | Supports digital signal bit rates up to 3.30 GBit/sec |
| Optical: | |
| Optical Transmitter | VCSEL Lasers, Class 1 laser product |
| Optical Receiver | PIN Photo Diodes |
| Fiber Cable | 50/125μ LC multi-Mode Optical Fiber with 7x LC connectors per module |
| DVIGear Fiber Cable | OFNP, Plenum Rated PVC Jacket, Diameter 5.0 mm (data available upon request) |
| Maximum Cable Length | Real EDID Mode: 100 m / 328 ft. EDID Emulation Mode: 500 m / 1640 ft. |
| DDC Support: | |
| EDID Support | An EDID memory built into the Tx module can learn and store the display's EDID info, thereby eliminating the need for a DDC connection using copper cables. |
| HDCP Support | HDCP communications are supported using optional DDC link over a CAT5 cable. |
| Power: | |
| Optical Transmitter | Tx module requires at least 300 ma of DC current from pin 14 of DVI (source) connector. Optional external power supply may be used if needed. |
| Optical Receiver | Must be powered using the supplied external power supply |
| External Power Supply | Input: 100-240VAC, 50-60Hz 0.5A / Output: +5VDC @ 2.0A |
| Power Consumption | Maximum: 3.0 watts (for both Tx and Rx units) |
| Mechanical: | |
| Construction | Rugged metal enclosure with jet black finish |
| Dimensions (L x W x H) | 7.05" x 3.56" x 1.31" (179.1 mm x 90.3 mm x 33.3 mm) |
| Weight | Tx Unit: 1.02 lb. (462g) Rx Unit: 1.02 lb. (462g) |
| Environmental: | |
| Storage | -4° to +158° F. | -20° to +70° C. |
| Operation | +32° to +122° F. | 0° to +50° C. |
| Relative Humidity | 10% to 90% |
Why not buy this DVIGear DVI-7320 1x LC HDMI 4K/60p Fiber Optic Extender from HDTV Supply today?
Why not buy this DVIGear DVI-7320 1x LC HDMI 4K/60p Fiber Optic Extender from HDTV Supply today?
1.Does this extender support single-link and dual-link DVI?
A: Yes; the DVI-7320 extends both single-link and dual-link DVI signals.
2.What maximum resolutions does the unit support for PC and HDTV?
A: For PC it supports single-link up to 1920x1200 and dual-link up to 3840x2400; for HDTV it supports up to 1080p and 2048x1080.
3.Is HDCP supported over this extender?
A: Yes; HDCP communications are supported using the optional DDC link over a CAT5 cable.
4.How does EDID and DDC work with long fiber runs?
A: The transmitter has a built-in EDID memory that can learn and store display EDID, and live EDID/DDC communications are supported using a standard CAT5 cable.
5.Does the product include an external power supply for the receiver?
A: Yes; the optical receiver must be powered using the supplied external power supply, and an external power supply specification is provided.
6.Can this extender send a DVI signal 500 meters?
A: Yes, but only in EDID Emulation Mode the maximum cable length is 500 m (1,640 ft); in Real EDID Mode the maximum is 100 m (328 ft).
7.What fiber cable type and connectors do I need?
A: You need 50/125μm multi-mode fiber with 7x LC connectors per module (seven LC connectors per unit).
8.How is each unit powered—do both ends need external power?
A: The receiver must be powered by the supplied external +5VDC supply; the transmitter can draw at least 300 mA from DVI pin 14 or use an optional external +5VDC supply.
9.Will the fiber transmission be affected by environmental signal noise?
A: No; the product states optical fiber transmission is immune to environmental signal noise.
10.What operating temperature and humidity ranges does the product support?
A: Operation is supported from 0° to +50° C (32° to 122° F) with relative humidity 10% to 90%; storage range is −20° to +70° C (−4° to +158° F).

