This DVIGear DVI-2550-SHR HDMI Super High Resolution Copper Cables, 50 meters is a Super High Resolution (SHR) HDMI cables are engineered for unsurpassed performance and reliability in mission critical applications
These cables are designed to transport high speed digital HDMI signals over very long distances while maintaining pristine signal / bit integrity.
High-Speed Signals — Long distance transport of high resolution HDMI signals over copper cables must overcome several challenges, such as insertion loss, differential skew and jitter
Insertion loss is caused by cable capacitance, which acts as a low-pass filter, blocking higher frequency signal components from passing
Skew occurs when the differential HDMI signals get delayed and become out of phase as they pass over a long cable
Both factors contribute to increased digital jitter, which degrades the performance of the cable
This jitter becomes more severe with higher resolutions and longer cable distances
Conventional cables that support lower resolutions at short distances are often unable to support the data rates required by higher resolutions at longer distances
The resulting video can be disrupted by visual artifacts or may not be visible at all.
Advanced Design — Built to overcome these challenges, the SHR Series HDMI Cables are constructed using heavy gauge 22AWG copper wires
This increases the cross-sectional cable area and decreases the capacitance of the cables, which allows signals with higher data rates to pass with minimal jitter
When coupled with DVIGear's Active Cable Extenders (ACE), cable lengths of up to 200 ft. (~ 60 meters) are possible while maintaining full compliance with HDMI signal parameters
The combination of these products are active copper cables with minimal insertion loss and skew. These cables rival the performance of fiber cables at a fraction of the cost, while providing superior ruggedness and durability.
DVIGear DVI-2550-SHR HDMI Super High Resolution Copper Cables, 50 meters Features:
- Cables 20m or longer include DVIGear's ACE (Active Cable Extender)
- Supports HDTV resolutions up to 1080p with 12-bit color
- Supports PC resolutions up to 1920x1200 and 2048x1080 at cable lengths up to 60m
- Supports HDMI data rates up to 3.4 Gpbs. at lengths up to 7.5m
- Supports HDMI data rates up to 2.25 Gbps. at lengths up to 40m
- Supports PC data rates up to 1.65 Gbps. at lengths up to 60m
- Heavy-duty 22AWG copper wires provide minimal insertion loss
- Ultra-low Skew guarantees unsurpassed digital fidelity
- Triple shielded for superior noise immunity
- Dual UL Ratings: UL13 (CL2) and UL758 (AWM20276). These cables are in-wall rated.
Why not buy this DVIGear DVI-2550-SHR HDMI Super High Resolution Copper Cables, 50 meters today?
DVIGear DVI-2550-SHR HDMI Super High Resolution Copper Cables, 50 meters Specifications:
- Model
- Product Designation: SHR
- Product Description: 22AWG (Standard) HDMI Cables
- Connectors
- Input / Output Connectors: 19-pin HDMI Male Connectors
- Contacts: 19 pins, 30μ Gold Plated, long life design
- Shell: Gold Flash Plated
- Performance
- Standards Compliance: DVI 1.0, HDMI 1.3
- Maximum Pixel Clock Frequency:
- 165 MHz - up to 60 meters
- 225 MHz - up to 50 meters
- 340 MHz - up to 7.5 meters
- Maximum Bit Rate (per Channel):
- 1.65 Gbps - up to 60 meters
- 2.25 Gbps - up to 50 meters
- 3.40 Gbps - up to 7.5 meters
- Maximum Bit Rate (Aggregate):
- 4.95 Gbps - up to 60 meters
- 6.75 Gbps - up to 50 meters
- 10.2 Gbps - up to 7.5 meters
- Supported HDTV Resolutions: 1080p / 60 Hz with 8, 10 and 12-bit color
- Supported Single-Link PC Resolutions: Up to 2048x1080, 1920x1200
- Supported Dual-Link PC Resolutions: n/a
- Cable Equalization: DVIGear's Active Cable Extender (ACE) is included with cables 50 meters (~ 65.6 ft.) and longer.
- Typical Parametric Data
- Voltage Rating: 75 V
- Differential Impedance: 100 ohms ± 5%
- Insertion Loss (SDD21): < 32 dB @ 825 MHz with 60 meter cable
- Intra-pair Skew: < 2.2 nsec (from 250 MHz - 2.5 GHz) with 60 meter cable
- Inter-pair Skew: < 150 psec (from 250 MHz - 2.5 GHz) with 60 meter cable
- Far End Crosstalk (FEXT): < -20 dB
- Propagation Delay: 4.55 nsec/meter
- Cable Lengths
- Available Cable Lengths (meters) (1): 0.5, 1, 2, 3, 5, 7.5, 10, 12.5, 15, 20, 25, 30, 35, 40, 45, 50, 60
- Available Cable Lengths (ft.) (1): 1.6, 3.3, 6.6, 9.8, 16.4, 24.6, 32.8, 41.0, 49.2, 65.6, 82.0, 98.4, 114.8,
- 131.2, 147.6, 164.0, 196.9
- Maximum Cable Length: 200 ft. (~ 60 meters)
- Mechanical
- Construction: 19 Conductor Cable with 4x high speed twisted pairs
- High Speed Conductors: 22AWG, FM-PE+SKIN Construction
- Shielding: Triple Shielding
- Jacket Material / Color: PVC / Blue (PMS 301c)
- Outside Diameter: 11.50 ± 0.20 mm
- Minimum Bend Radius: 43.5 mm
- Environmental
- Operating Temperature: -13° to 140° F (-25° to 60° C)
- Storage Temperature: -40° to 167° F (-40° to 75° C)
- Humidity (storage / operating): 10% to 90% (non-condensing)
- Regulatory Approvals
- Compliance:
- UL13 (CL2)
- UL758 (AWM20276)
- RoHS
- UL File Numbers:
- AVLV2.E245407
- AVLV8.E245407
- QPTZ.E245576
- Warranty
- Limited Warranty: 3 Years
- Accessories Included
- DVIGear's Active Cable Extender (ACE) is included with cables 50 meters (~ 65.6 ft.) and longer.
Why not buy this DVIGear DVI-2550-SHR HDMI Super High Resolution Copper Cables, 50 meters today?
DVIGear DVI-2550-SHR Specifications
Why not buy this DVIGear DVI-2550-SHR HDMI Super High Resolution Copper Cables, 50 meters today?
Can the DVI-2550-SHR carry 1080p video with 12-bit color?
A: Yes — the cable supports 1080p/60 with 8, 10 and 12-bit color.
Does the 50 meter cable include an active extender (ACE)?
A: Yes — cables 20m or longer include DVIGear's Active Cable Extender (ACE), and the 50 meter cable includes ACE.
What connector type and plating does the DVI-2550-SHR use?
A: The cable uses 19-pin HDMI male connectors with 19-pin contacts that are 30μ gold plated.
Is this cable in-wall rated and what UL listings does it carry?
A: Yes — the cable is in-wall rated and carries UL13 (CL2) and UL758 (AWM20276) compliance.
What are the differential impedance and insertion-loss/skew characteristics at long length?
A: The cable has a differential impedance of 100 ohms ± 5%, insertion loss < 32 dB @ 825 MHz for 60 m, intra-pair skew < 2.2 nsec (250 MHz–2.5 GHz) for 60 m, and inter-pair skew < 150 psec (250 MHz–2.5 GHz) for 60 m.
What is the stated maximum cable length for this product family?
A: The product lists a maximum cable length of 200 ft. (about 60 meters).
Does the DVI-2550-SHR use heavy-gauge conductors and shielding to reduce insertion loss and noise?
A: Yes — it uses heavy-duty 22AWG conductors and triple shielding for minimal insertion loss and superior noise immunity.
Will the 50 meter cable support a PC running 1920x1200 or 2048x1080?
A: Yes — the cable supports PC resolutions up to 1920x1200 and 2048x1080 at cable lengths up to 60 meters.
Does this cable comply with HDMI 1.3 and DVI 1.0 standards?
A: Yes — the cable lists compliance with DVI 1.0 and HDMI 1.3.
Is the jacket color and material documented?
A: Yes — the jacket material is PVC and the color is Blue (PMS 301c).
Does the cable ship with an Active Cable Extender only for long lengths?
A: Yes — the ACE is included with cables 20 meters or longer and is specifically listed as included for 50 meter and longer cables.
