This DVIGear DVI-2535-SHR HDMI Super High Resolution Copper Cables, 35 meters is a Super High Resolution (SHR) HDMI cables are engineered for unsurpassed performance and reliability in mission critical applications
These cables are designed to transport high speed digital HDMI signals over very long distances while maintaining pristine signal / bit integrity.
High-Speed Signals — Long distance transport of high resolution HDMI signals over copper cables must overcome several challenges, such as insertion loss, differential skew and jitter
Insertion loss is caused by cable capacitance, which acts as a low-pass filter, blocking higher frequency signal components from passing
Skew occurs when the differential HDMI signals get delayed and become out of phase as they pass over a long cable
Both factors contribute to increased digital jitter, which degrades the performance of the cable
This jitter becomes more severe with higher resolutions and longer cable distances
Conventional cables that support lower resolutions at short distances are often unable to support the data rates required by higher resolutions at longer distances
The resulting video can be disrupted by visual artifacts or may not be visible at all.
Advanced Design — Built to overcome these challenges, the SHR Series HDMI Cables are constructed using heavy gauge 22AWG copper wires
This increases the cross-sectional cable area and decreases the capacitance of the cables, which allows signals with higher data rates to pass with minimal jitter
When coupled with DVIGear's Active Cable Extenders (ACE), cable lengths of up to 200 ft. (~ 60 meters) are possible while maintaining full compliance with HDMI signal parameters
The combination of these products are active copper cables with minimal insertion loss and skew. These cables rival the performance of fiber cables at a fraction of the cost, while providing superior ruggedness and durability.
DVIGear DVI-2535-SHR HDMI Super High Resolution Copper Cables, 35 meters Features:
- Cables 20m or longer include DVIGear's ACE (Active Cable Extender)
- Supports HDTV resolutions up to 1080p with 12-bit color
- Supports PC resolutions up to 1920x1200 and 2048x1080 at cable lengths up to 60m
- Supports HDMI data rates up to 3.4 Gpbs. at lengths up to 7.5m
- Supports HDMI data rates up to 2.25 Gbps. at lengths up to 40m
- Supports PC data rates up to 1.65 Gbps. at lengths up to 60m
- Heavy-duty 22AWG copper wires provide minimal insertion loss
- Ultra-low Skew guarantees unsurpassed digital fidelity
- Triple shielded for superior noise immunity
- Dual UL Ratings: UL13 (CL2) and UL758 (AWM20276). These cables are in-wall rated.
Why not buy this DVIGear DVI-2535-SHR HDMI Super High Resolution Copper Cables, 35 meters today?
DVIGear DVI-2535-SHR HDMI Super High Resolution Copper Cables, 35 meters Specifications:
- Model
- Product Designation: SHR
- Product Description: 22AWG (Standard) HDMI Cables
- Connectors
- Input / Output Connectors: 19-pin HDMI Male Connectors
- Contacts: 19 pins, 30μ Gold Plated, long life design
- Shell: Gold Flash Plated
- Performance
- Standards Compliance: DVI 1.0, HDMI 1.3
- Maximum Pixel Clock Frequency:
- 165 MHz - up to 60 meters
- 225 MHz - up to 40 meters
- 340 MHz - up to 7.5 meters
- Maximum Bit Rate (per Channel):
- 1.65 Gbps - up to 60 meters
- 2.25 Gbps - up to 40 meters
- 3.40 Gbps - up to 7.5 meters
- Maximum Bit Rate (Aggregate):
- 4.95 Gbps - up to 60 meters
- 6.75 Gbps - up to 40 meters
- 10.2 Gbps - up to 7.5 meters
- Supported HDTV Resolutions: 1080p / 60 Hz with 8, 10 and 12-bit color
- Supported Single-Link PC Resolutions: Up to 2048x1080, 1920x1200
- Supported Dual-Link PC Resolutions: n/a
- Cable Equalization: DVIGear's Active Cable Extender (ACE) is included with cables 35 meters (~ 65.6 ft.) and longer.
- Typical Parametric Data
- Voltage Rating: 75 V
- Differential Impedance: 100 ohms ± 5%
- Insertion Loss (SDD21): < 32 dB @ 825 MHz with 60 meter cable
- Intra-pair Skew: < 2.2 nsec (from 250 MHz - 2.5 GHz) with 60 meter cable
- Inter-pair Skew: < 150 psec (from 250 MHz - 2.5 GHz) with 60 meter cable
- Far End Crosstalk (FEXT): < -20 dB
- Propagation Delay: 4.55 nsec/meter
- Cable Lengths
- Available Cable Lengths (meters) (1): 0.5, 1, 2, 3, 5, 7.5, 10, 12.5, 15, 20, 25, 30, 35, 40, 45, 50, 60
- Available Cable Lengths (ft.) (1): 1.6, 3.3, 6.6, 9.8, 16.4, 24.6, 32.8, 41.0, 49.2, 65.6, 82.0, 98.4, 114.8,
- 131.2, 147.6, 164.0, 196.9
- Maximum Cable Length: 200 ft. (~ 60 meters)
- Mechanical
- Construction: 19 Conductor Cable with 4x high speed twisted pairs
- High Speed Conductors: 22AWG, FM-PE+SKIN Construction
- Shielding: Triple Shielding
- Jacket Material / Color: PVC / Blue (PMS 301c)
- Outside Diameter: 11.50 ± 0.20 mm
- Minimum Bend Radius: 43.5 mm
- Environmental
- Operating Temperature: -13° to 140° F (-25° to 60° C)
- Storage Temperature: -40° to 167° F (-40° to 75° C)
- Humidity (storage / operating): 10% to 90% (non-condensing)
- Regulatory Approvals
- Compliance:
- UL13 (CL2)
- UL758 (AWM20276)
- RoHS
- UL File Numbers:
- AVLV2.E245407
- AVLV8.E245407
- QPTZ.E245576
- Warranty
- Limited Warranty: 3 Years
- Accessories Included
- DVIGear's Active Cable Extender (ACE) is included with cables 35 meters (~ 65.6 ft.) and longer.
Why not buy this DVIGear DVI-2535-SHR HDMI Super High Resolution Copper Cables, 35 meters today?
DVIGear DVI-2535-SHR Specifications
Why not buy this DVIGear DVI-2535-SHR HDMI Super High Resolution Copper Cables, 35 meters today?
Will this 35 meter cable ship with DVIGear's ACE (Active Cable Extender)?
A: Yes — cables 35 meters (and longer) include DVIGear's Active Cable Extender (ACE).
What HDMI and DVI standards does this cable support?
A: This cable is specified as compliant with DVI 1.0 and HDMI 1.3.
What connector type and contact plating does the cable use?
A: It uses 19-pin HDMI male connectors with 30μ gold-plated contacts.
What cable conductor gauge and shielding does the SHR cable use?
A: The SHR cable uses heavy-duty 22AWG high-speed conductors and triple shielding.
What HDTV and PC resolutions are supported over long runs?
A: The cable supports 1080p/60 HDTV (8, 10 and 12-bit color) and single-link PC resolutions up to 2048x1080 and 1920x1200 at specified lengths.
What video data rates are supported at different cable lengths?
A: Supported maximum per-channel bit rates are 1.65 Gbps up to 60 meters, 2.25 Gbps up to 40 meters, and 3.40 Gbps up to 7.5 meters.
What aggregate HDMI bit rates and pixel clocks are specified by length?
A: Aggregate bit-rate limits are 4.95 Gbps up to 60 meters, 6.75 Gbps up to 40 meters, and 10.2 Gbps up to 7.5 meters; maximum pixel clocks are 165 MHz up to 60 m, 225 MHz up to 40 m, and 340 MHz up to 7.5 m.
Are these cables in-wall rated for fixed installations?
A: Yes — the cable carries dual UL ratings and is in-wall rated.
What insertion loss and skew performance are specified for long runs?
A: For a 60 meter cable the specified insertion loss is < 32 dB at 825 MHz, intra-pair skew is < 2.2 nsec (250 MHz–2.5 GHz), and inter-pair skew is < 150 psec (250 MHz–2.5 GHz).
Can I run 1080p/60 over this 35 meter cable?
A: Yes — the cable supports 1080p/60 with 8, 10 and 12-bit color at the lengths this series covers, and the 35 meter unit includes the ACE extender required for long runs.
Will this cable work in a wall chase or conduit?
A: Yes — it carries UL13 (CL2) and UL758 (AWM20276) ratings and is described as in-wall rated.
What is the cable's outside diameter and minimum bend radius in inches?
A: The outside diameter is 0.45 ± 0.01 inches and the minimum bend radius is 1.71 inches.
How far can this cable reliably carry HDMI signals?
A: DVIGear specifies a maximum cable length of 200 ft. (approximately 60 meters) for the SHR series when used with the appropriate ACE equalization.
