This DVIGear DVI-2345-SHR DVI-D Super High Resolution Copper Cables, 45 Meters are engineered for unsurpassed performance and reliability in mission critical applications
These cables are designed to transport high speed digital DVI and HDMI signals over very long distances while maintaining pristine signal / bit integrity.
High-Speed Signals — Long distance transport of high resolution DVI and HDMI signals over copper cables must overcome several challenges, such as insertion loss, differential skew and jitter
Insertion loss is caused by cable capacitance, which acts as a low-pass filter, blocking higher frequency signal components from passing
Skew occurs when the differential DVI and HDMI signals get delayed and become out of phase as they pass over a long cable
Both factors contribute to increased digital jitter, which degrades the performance of the cable
This jitter becomes more severe with higher resolutions and longer cable distances
Conventional cables that support lower resolutions at short distances are often unable to support the data rates required by higher resolutions at longer distances
The resulting video can be disrupted by visual artifacts or may not be visible at all.
Advanced Design Built to overcome these challenges, the SHR Series DVI Cables are constructed using heavy gauge 22AWG copper wires
This increases the cross-sectional cable area and decreases the capacitance of the cables, which allows signals with higher data rates to pass with minimal jitter
When coupled with DVIGear’s Active Cable Extenders (ACE), cable lengths of up to 200 ft. (~ 60 meters) are possible while maintaining full compliance with DVI and HDMI signal parameters
The combination of these products are active copper cables with minimal insertion loss and skew
These cables rival the performance of fiber cables at a fraction of the cost, while providing superior ruggedness and durability
DVIGear DVI-2345-SHR DVI-D Super High Resolution Copper Cables, 45 Meters Features:
- Cables 20m or longer include DVIGear's ACE (Active Cable Extender)
- Supports HDTV resolutions up to 1080p with 12-bit color
- Supports PC resolutions up to 1920x1200 and 2048x1080 at cable lengths up to 60m
- Supports HDMI data rates up to 3.4 Gpbs. at lengths up to 7.5m
- Supports HDMI data rates up to 2.25 Gbps. at lengths up to 40m
- Supports PC data rates up to 1.65 Gbps. at lengths up to 60m
- Heavy-duty 22AWG copper wires provide minimal insertion loss
- Ultra-low Skew guarantees unsurpassed digital fidelity
- Triple shielded for superior noise immunity
- Dual UL Ratings: UL13 (CL2) and UL758 (AWM20276). These cables are in-wall rated
Why not buy this DVIGear DVI-2345-SHR DVI-D Super High Resolution Copper Cables, 45 Meters today?
DVIGear DVIGear DVI-2345-SHR DVI-D Super High Resolution Copper Cables, 45 Meters Specifications:
- Model
- Product Designation: SHR
- Product Description: 22AWG Single-Link DVI-D Cables
- Connectors
- Input / Output Connectors: 18+1 DVI Male Connectors
- Contacts: 19 pins, 30μ Gold Plated, long life design
- Shell: Gold Flash Plated
- Performance
- Standards Compliance: DVI 1.0, HDMI 1.3
- Maximum Pixel Clock Frequency: 165 MHz - up to 60 meters, 225 MHz - up to 40 meters, 340 MHz - up to 7.5 meters
- Maximum Bit Rate (per Channel): 1.65 Gbps - up to 60 meters, 2.25 Gbps - up to 40 meters, 3.40 Gbps - up to 7.5 meters
- Maximum Bit Rate (Aggregate): 4.95 Gbps - up to 60 meters, 6.75 Gbps - up to 40 meters, 10.2 Gbps - up to 7.5 meters
- Supported HDTV Resolutions: 1080p / 60 Hz with 8, 10 and 12-bit color
- Supported Single-Link PC Resolutions: Up to 2048x1080, 1920x1200
- Supported Dual-Link PC Resolutions: n/a
- Cable Equalization: DVIGear's Active Cable Extender (ACE) is included with cables 20 meters (~ 65.6 ft.) and longer.
- Typical Parametric Data
- Voltage Rating: 75 V
- Differential Impedance: 100 ohms ± 5%
- Insertion Loss (SDD21): < 32 dB @ 825 MHz with 60 meter cable
- Intra-pair Skew: < 2.2 nsec (from 250 MHz - 2.5 GHz) with 60 meter cable
- Inter-pair Skew: < 150 psec (from 250 MHz - 2.5 GHz) with 60 meter cable
- Far End Crosstalk (FEXT): < -20 dB
- Propagation Delay: 4.55 nsec/meter
- Mechanical
- Construction: 19 Conductor Cable with 4x high speed twisted pairs
- High Speed Conductors: 22AWG, FM-PE+SKIN Construction
- Shielding: Triple Shielding
- Jacket Material / Color: PVC / Blue (PMS 301c)
- Outside Diameter: 11.5 ± 0.20 mm
- Minimum Bend Radius: 43.5 mm
- Environmental
- Operating Temperature: -13° to 140° F (-25° to 60° C)
- Storage Temperature: -40° to 167° F (-40° to 75° C)
- Humidity (storage / operating): 10% to 90% (non-condensing)
Why not buy this DVIGear DVI-2345-SHR DVI-D Super High Resolution Copper Cables, 45 Meters today?
DVIGear DVI-2345-SHR Specifications
Why not buy this DVIGear DVI-2345-SHR DVI-D Super High Resolution Copper Cables, 45 Meters today?
Does this cable include an active extender for long runs?
A: Yes — cables 20 meters or longer include DVIGear's ACE (Active Cable Extender).
What connector type does the DVI-2345-SHR use?
A: It uses 18+1 DVI male connectors (single-link DVI-D).
What video resolutions does it support at long distances?
A: It supports HDTV up to 1080p/60 Hz (8, 10, and 12-bit color) and single‑link PC resolutions up to 2048x1080 and 1920x1200 at cable lengths up to 60 meters.
Does this cable support dual‑link DVI?
A: No — dual‑link PC resolutions are listed as not applicable for this model.
What HDMI and DVI standards and data rates does the cable meet?
A: The cable complies with DVI 1.0 and HDMI 1.3 and lists maximum per‑channel bit rates of 1.65 Gbps up to 60 m, 2.25 Gbps up to 40 m, and 3.40 Gbps up to 7.5 m.
What pixel clock frequencies are supported over distance?
A: Maximum pixel clock is listed as 165 MHz up to 60 m, 225 MHz up to 40 m, and 340 MHz up to 7.5 m.
What construction and shielding does the cable use to keep signal quality?
A: It uses heavy 22 AWG high‑speed conductors with a 19‑conductor, 4× high‑speed twisted‑pair construction and triple shielding.
What are the cable's insertion loss and skew characteristics at 60 meters?
A: With a 60 meter cable the listed insertion loss is < 32 dB @ 825 MHz, intra‑pair skew is < 2.2 nsec (250 MHz–2.5 GHz), and inter‑pair skew is < 150 psec (250 MHz–2.5 GHz).
Is this cable rated for in‑wall installation?
A: Yes — it carries dual UL ratings and is in‑wall rated.
Will a 45 meter run of this cable carry 1080p at 60 Hz?
A: Yes — the cable supports 1080p/60 Hz with up to 12‑bit color at cable lengths up to 60 meters, so a 45 meter run is supported.
Do I need an active extender to run 45 meters?
A: You do not need to add one — cables 20 meters or longer include DVIGear's ACE active cable extender.
