This DVDO StreamRec-1 Full HD Single Channel HDMI/SDI Streamer Recorder is a single channel live streaming and recording system.
It can stream incoming HDMI or SDI signals up to Full HD resolution to various streaming platforms such as Facebook Live, YouTube or others.
It can also record incoming HDMI or SDI signals as well as IP content from the network on external storage devices via the USB 3.0 port on the front panel and play the content through the HDMI output.
It can be controlled over IP with a user friendly web GUI. It also has physical buttons on the front panel to turn on and off streaming and recording and for source selection.
DVDO StreamRec-1 Full HD Single Channel HDMI/SDI Streamer Recorder Features:
- Switchable HDMI & 3G-SDI inputs (up to 1080p60 resolution) with HDMI & 3G-SDI loop-outs.
- Separate 3.5mm audio input and output for audio embedding and de-embedding
- Recording: USB 3.0 port for external storage devices
- H.264/H.265/AVC encoding & decoding
- Streaming protocols: RTSP, ONVIF, UDP & HLS
- Compatible with various live streaming platforms including Facebook Live, YouTube,…
- Dual HDMI output: HDMI loop-out to preview incoming HDMI signals and HDMI PGM output to display decoded IP stream from the network
- Physical buttons on front panel for Streaming, Recording and Source selection
- System configuration & IP control via web interface
- Controllable by keyboard & mouse via USB 2.0 ports on back panel
Why not buy this DVDO StreamRec-1 Full HD Single Channel HDMI/SDI Streamer Recorder today?
HDTV Supply partners with DVDO to sell and support all DVDO products
Why not buy this DVDO StreamRec-1 Full HD Single Channel HDMI/SDI Streamer Recorder today?
What input types and resolutions does the StreamRec-1 accept?
A: It accepts one HDMI and one 3G-SDI input and supports input resolutions up to 1920×1080p@60/50fps (with additional listed resolutions down to 160×120).
Can the StreamRec-1 stream and record the same source at different resolutions simultaneously?
A: Yes; it supports dual encoding with main and sub streams so you can stream a source up to 1920×1080 (main) while recording a lower-resolution sub stream (example up to 640×480) at the same time.
Which streaming protocols and services can this unit use?
A: It supports RTSP (including RTSP over HTTP/TCP/UDP), RTMP (publish), HLS, TS over UDP, and can support NDI-HX with a separate license; these protocols allow streaming to services like Facebook Live and YouTube.
What recording formats and storage options are supported?
A: Recordings can be saved in MP4, TS, or MOV formats to an external USB 3.0 storage device, and the manual recommends using USB3.0 storage formatted as FAT32 or NTFS.
What outputs are available for previewing and program output?
A: The unit provides an HDMI loop-out for previewing incoming HDMI, an HDMI PGM output to display decoded IP stream, and a 3G-SDI loop-out.
Does the StreamRec-1 support audio embedding and de‑embedding?
A: Yes; it has a separate 3.5mm analog audio input for embedding and a 3.5mm analog audio output for de-embedded audio.
What video codecs and bitrate ranges does the StreamRec-1 support?
A: It supports H.264 and H.265 (profiles Baseline/Main/High) and allows configurable bitrates from 44 kbps up to 100 Mbps.
Will this unit advertise an RTSP stream I can pull from the network?
A: Yes; it can act as an RTSP server with configurable RTSP ports, account/password, session name, and multicast/unicast options.
How do I supply network settings if I don’t want to use DHCP?
A: Disable DHCP in Network Settings and enter the static IP, subnet mask, gateway, and DNS values in the Network section of the web GUI.
