This DVDO Splitter-14-CAT 4K 1x4 HDMI Splitter with CAT Outputs is an 18Gbps 1x4HDMI splitter that can distribute a single HDMI source signal to any 4 display devices, with supported video resolutions up to 4K2K@50/60Hz 4:4:4.
The splitter has 1 HDMI loop output in addition to the 4 Cat outputs and comes with 4 Cat receivers.
The HDMI signal transmission distance can be extended up to 115ft/35m at the resolution of 4K2K@60Hz, or 164ft/50m at 4K2K@30Hz, or 197ft/60m at 1080p@60Hz via a single Cat6/6a/7 cable.
DVDO-Splitter-14-CAT supports one-way IR control signal pass-through, audio extract function and advanced EDID management.
DVDO Splitter-14-CAT 4K 1x4 HDMI Splitter with CAT Outputs Features:
- Includes 1x4 splitter and 4 Cat receivers
- HDMI 2.0b, HDCP 2.2 and HDCP 1.x compliant
- 18Gbps video bandwidth
- Supports video resolutions up to 4K2K@50/60Hz 4:4:4
- HDR, HDR10+, HLG, Dolby Vision
- Up to 7.1CH HD audio pass-through
- Digital and analog audio de-embedded outputs
- Extend the signal transmission distance up to 115ft/35m at the resolution of 4K2K@60Hz, 164ft/50m at 4K2K@30Hz, 197ft/60m at 1080P@60Hz via a single Cat6/6a/7 cable
- 1 HDMI input, 1 HDMI loop output and 4 Cat outputs
- 20-60Hz IR control source equipment from Rx side
- Advanced EDID management
- One-way PoC function (only from transmitter to receiver)
Why not buy this DVDO Splitter-14-CAT 4K 1x4 HDMI Splitter with CAT Outputs today?
DVDO-Splitter-14-CAT User Manual
DVDO-Splitter-14-CAT Datasheet
HDTV Supply partners with DVDO to sell and support all DVDO products
Why not buy this DVDO Splitter-14-CAT 4K 1x4 HDMI Splitter with CAT Outputs today?
What maximum video resolution and color sampling does this splitter support?
A: It supports up to 4K2K@50/60Hz with 4:4:4 color sampling and an 18Gbps (594MHz) video bandwidth.
How far can I run a single Cat cable for 4K60, 4K30, and 1080p signals?
A: Using a single Cat6/6a/7 cable, the manual documents up to 115 ft (35 m) for 4K@60Hz, 164 ft (50 m) for 4K@30Hz, and 197 ft (60 m) for 1080p@60Hz.
Can the transmitter power the CAT receivers over the Cat cable?
A: Yes — the device supports a one-way PoC function where the transmitter can power the receiver over the CAT cable.
What EDID options are available to set source and output behavior?
A: You can select many predefined EDID presets (including multiple 1080p, 3D, 4K30_444, and 4K60_420/444 modes), copy EDID from the loop out or any CAT output, or use PC control mode.
How can I control or automate EDID and settings from a computer?
A: You can control EDID and other functions by connecting the SERVICE port to a PC and sending ASCII commands over serial at 115200 baud (8 data bits, 1 stop bit).
