This Blustream DA11AEN-V2 Dante Audio Analogue Encoder has been designed to encode unbalanced or balanced 2ch analogue audio to Dante digital signals.
The DA11AEN-V2 allows any non-Dante audio source such as mixing consoles, amplifiers, computers and Blustream Matrix products or distribution products to be connected as a source within a Dante network.
The DA11AEN-V2 is a plug & play device that is powered using either PoE (Power Over Ethernet) from any PoE network switch or via a local 12V power supply input.
The DA11AEN-V2 also supports AES67 RTP audio transport. The inbuilt web interface module can be used for configuration and control of the device.
Blustream DA11AEN-V2 Dante Audio Analogue Encoder Features:
- Encodes unbalanced or balanced 2ch analogue audio to Dante digital signals
- Supports 44.1, 48, 88.2 & 96 KHz sample rates @ 16/24/32 Bit
- Configurable Dante device latency (supports 2-10ms configurable using Dante Controller)
- Supports AES67 RTP audio transport
- Web interface module for control and configuration of the device
- Features Class 0 802.3af PoE for powering of product from any PoE switch
- Local 12V power supply input for when network switch does not support PoE*
- Dante is a registered trademark of Audinate Pty Ltd
Why not buy this Blustream DA11AEN-V2 Dante Audio Analogue Encoder from HDTV Supply today?
Blustream DA11AEN-V2 Dante Audio Analogue Encoder Specifications:
- Audio Input Connectors: 6-pin Phoenix connector (2ch balanced / unbalanced analogue audio)
- Audio Output Connectors: 1 x RJ45, female (100 Mbps Dante network)
- Casing Dimensions (L x W x H): 120mm x 47mm x 26mm
- Shipping Weight: 0.3 Kg
- Operating Temperature: 32°F to 104°F (0°C to 40°C)
- Storage Temperature: - 4°F to 140°F (- 20°C to 60°C)
- Power Supply: Class 0 IEEE 802.3af PoE PD or 12V/1A DC 2-PIN Phoenix connector
Why not buy this Blustream DA11AEN-V2 Dante Audio Analogue Encoder from HDTV Supply today?
Blustream DA11AEN-V2 User Manual
Blustream DA11AEN-V2 Datasheet
