This Blustream DA11ADE Dante? Audio Analogue Decoder is a plug & play device that is powered using either PoE (Power over Ethernet) from any PoE network switch or via local 12v power supply input.
Our DA11ADE has been designed to decode a Dante® digital signal to unbalanced or balanced 2ch analogue audio.
The DA11ADE also supports AES67 RTP audio transport and independent gain per channel for adjustment of the audio sensitivity as required.
Blustream DA11ADE Dante? Audio Analogue Decoder Features:
- Decodes a Dante® digital signal to unbalanced or balanced 2ch analogue audio
- Supports 44.1, 48 & 96 KHz sample rates @ 24 Bit
- Configurable Dante® device latency (supports 1, 2 or 5ms configurable using Dante® Controller)
- Independent output gain control per channel: +18dBu to -10dBV
- Supports AES67 RTP audio transport
- Features Class 1 802.3af PoE for powering of product from any PoE switch
Why not buy this Blustream DA11ADE Dante? Audio Analogue Decoder today?
Blustream DA11ADE DA11ADE Dante? Audio Analogue Decoder Specifications:
- Audio Input Connectors: 1 x RJ45, female (100Mbps Dante® network)
- Audio Output Connectors: 6-pin Phoenix connector (2ch balanced / un-balanced analogue audio)
- Casing Dimensions (L x W x H): 120mm x 47mm x 26mm
- Shipping Weight: 0.2kg
- Operating Temperature: 32°F to 104°F (0°C to 40°C)
- Storage Temperature: -4°F to 140°F (-20°C to 60°C)
- Power Supply: Class 1 IEEE 802.3af POE PD
Box Contents
- 1 x DA11ADE
- 1 x Quick Reference Guide
Why not buy this Blustream DA11ADE Dante? Audio Analogue Decoder today?
Does this unit accept Power over Ethernet (PoE)?
A: Yes. The DA11ADE supports Class 1 IEEE 802.3af PoE for powering the product from any PoE switch.
Can I power it without PoE?
A: Yes. It can be powered via a local 12v power supply input as an alternative to PoE.
What analog outputs and connector does it provide?
A: The decoder provides 2‑channel balanced or unbalanced analogue audio on a 6‑pin Phoenix connector.
What digital audio formats and sample rates does it support?
A: It supports Dante digital audio and AES67 RTP transport at 44.1, 48, and 96 kHz sample rates at 24‑bit.
Does the box include the DA11ADE and any documentation?
A: Yes. The box contents list one DA11ADE and one Quick Reference Guide.
Can I decode a Dante stream to two analog channels with this device?
A: Yes. The DA11ADE decodes a Dante digital signal to two‑channel balanced or unbalanced analogue audio.
Will it accept AES67 streams?
A: Yes. The DA11ADE supports AES67 RTP audio transport.
Can I change the device latency for networked audio?
A: Yes. Dante device latency is configurable to 1, 2, or 5 ms using Dante Controller.
Does the unit let me adjust output level per channel?
A: Yes. It provides independent output gain control per channel from +18 dBu to -10 dBV.
What operating and storage temperatures should I expect for installation?
A: The operating temperature range is 32°F to 104°F (0°C to 40°C), and storage temperature is -4°F to 140°F (-20°C to 60°C).
