null

ATEN VK224 4-Port Serial Expansion Box

$410.00
Part Number:
VK224
Availability:
Contact us for availability
1:
4-Port Serial Expansion Box
2:
Provides 4 bi-directional
3:
Up to eight VK224 expansion boxes
4:
Flexible Deployment
5:
Supports Power over Ethernet
6:
Free Shipping & Free 3-Year ATEN Warranty
7:
Add'l Discount to .EDU & .GOV & .MIL & .ORG
ATEN VK224 4-Port Serial Expansion Box

ATEN VK224 4-Port Serial Expansion Box provides four additional bi-directional RS-232 / 422 / 485 serial ports for a flexible expansion of the ATEN Control System. This allows users to control additional serial devices in an environment where more serial devices are required. With the advantage of an Ethernet-based connection, the expansion box can be easily connected to the VK2100 Control Box via a LAN connection from a variety of locations across a network.

ATEN VK224 4-Port Serial Expansion Box Features:

  • Provides 4 bi-directional RS-232/422/485 serial ports to expand the ATEN Control System
  • Up to eight VK224 expansion boxes can be added to a single Control Box
  • Flexible Deployment: Connects to a Control Box via an Ethernet connection
  • ID Switch pairs the VK224 with a controller to instantly configure the network settings
  • Supports Power over Ethernet (PoE) or DC power supply
  • Firmware upgradable through USB or Web interface

ATEN NOTE: HDTV Supply supports our Federal, State & Local Governments, Schools, Universities & Military accounts by offering an additional discount if your email address ends in .EDU & .GOV & .MIL & .ORG. Please see Options below.

Why not buy this ATEN VK224 4-Port Serial Expansion Box today?

ATEN VK224 4-Port Serial Expansion Box Specifications:

Interfaces
Serial4 x Programmable Bi-directional RS-232/422/485 Port
(4 x DB9 Male Connector, configurable via pin assignments);
 - Baud Rate: 300 to 115200 (default: 9600);
 - Data Bit: 8 (default) or 7;
 - Stop Bit: 1 (default) or 2;
 - Parity: None (default), Even or Odd;
 - Flow Control: None (default) RTS/CTS

RS-232RS-422RS-485
Pin2: RXPin 1:RX-Pin3:D+
Pin3: TXPin 2: RX+Pin 4:D-
Pin 5: GNDPin 3: TX+
Pin 7: RTSPin 4: TX-
Pin 8: CTSPin 5: GND
Ethernet1 x RJ-45 Female, 10/100Base-T
Supported Protocol: ARP, ICMP, TCP/IP, DHCP, HTTPS, SSH
DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds:
IP: 192.168.0.60
Subnet Mask: 255.255.255.0
Switches
Controller ID1 x 16-segment Switch
Expander ID1 x 8-segment Switch
Reset Button1 x Semi-recessed Pushbutton
USB1 x USB Type A
Power ConsumptionDC5V:3.8W:28BTU
DC48V:4.75W:33BTU
Environmental
Operating Temperature0 - 50˚C
Storage Temperature-20 - 60˚C
Humidity0 - 80% RH, Non-Condensing
Physical Properties
HousingMetal
Weight0.45 kg ( 0.99 lb )
Dimensions (L x W x H)13.00 x 7.58 x 4.20 cm
(5.12 x 2.98 x 1.65 in.)
NoteFor some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.

Why not buy this ATEN VK224 4-Port Serial Expansion Box today?

ATEN VK224 Data Sheet

ATEN VK224 User Manual

Why not buy this ATEN VK224 4-Port Serial Expansion Box today?

Tawk.to