ATEN VK236 6-Port IR/Serial Expansion Box

Aten

$482.00
Part Number:
VK236
Availability:
Contact us for availability
1:
6-Port IR/Serial Expansion Box
2:
Provides 6 IR/Serial ports
3:
ID Switch pairs the VK236
4:
Up to eight VK236 expansion boxes
5:
Supports Power over Ethernet
6:
Free USA Shipping"
7:
2-Year ATEN Warranty"
ADD OPTIONS:
This Aten VK236 6-Port IR/Serial Expansion Box provid es six additional IR/Serial ports for a flexible expansion of the ATEN Control System. This allows users to control additional IR/serial devices in an environment where more devices are required. With the advantage of an Ethernet-based connection, the expansion box can be easily connected to the VK2100 Control Box via a LAN connection from a variety of locations across a network.

ATEN VK236 6-Port IR/Serial Expansion Box Features:

  • Provid es 6 IR/Serial ports to expand the ATEN Control System
  • Up to eight VK236 expansion boxes can be added to a single Control Box
  • Flexible Deployment: Connects to a Control Box via an Ethernet connection
  • id Switch pairs the VK236 with a controller to instantly configure the network settings
  • Supports Power over Ethernet (PoE) or DC power supply
  • Firmware upgradable through USB or Web interface

NOTE: Many Aten products, bought here at HDTV Supply, comply with the USA Governments TAA requirements. TAA requires that products originate from the United States or another approved country. These Aten products, bought here at HDTV Supply, do not ship from China. Call us at 833-965-3722 for latest list of Aten TAA Complaint Products.

Why not buy this ATEN VK236 6-Port IR/Serial Expansion Box today?

ATEN VK236 6-Port IR/Serial Expansion Box Specifications:

Interfaces
IR/Serial 6 x Programmable IR / Uni-directional RS-232 Port
6 x 2-Pole Terminal Block Connector
IR: TTL level (0 to 5 V)
- Carrier Frequency: 10KHz~455KHz;
Serial: Uni-directional RS-232 ( + - 5 V)
- Baud Rate: 300 to 115200 (default: 9600);
- Data Bit: 8 (default) or 7;
- Stop Bit: 1 (default) or 2;
- Parity: None (default), Even or Odd
Ethernet 1 x RJ-45 Female, 10/100Base-T
Supported Protocol: ARP, ICMP, TCP/IP, DHCP, HTTPS, SSH
DHCP-enabled. The following default IP settings will be used if no IP is assigned within 30 seconds:
IP: 192.168.0.60
Subnet Mask: 255.255.255.0
Switches
Controller id 1 x 16-segment Switch
Expander id 1 x 8-segment Switch
Reset Button 1 x Semi-recessed Pushbutton
USB 1 x USB Type A (Firmware upgrade only)
Power Consumption DC5V:1.31W:17BTU
DC48V:1.64W:18BTU
Environmental
Operating Temperature 0 - 50˚C
Storage Temperature -20 - 60˚C
Humid ity 0 - 80% RH, Non-Condensing
Physical Properties
Housing Metal
Weight 0.45 kg ( 0.99 lb )
Dimensions (L x W x H) 13.00 x 7.58 x 4.20 cm
(5.12 x 2.98 x 1.65 in.)
Note For some of rack mount products, please note that the standard physical dimensions of WxDxH are expressed using a LxWxH format.

Why not buy this ATEN VK236 6-Port IR/Serial Expansion Box today?

ATEN VK236 Data Sheet

ATEN VK236 User Manual

Why not buy this ATEN VK236 6-Port IR/Serial Expansion Box today?