WolfPack 6x12 Audio Multizone Amp - Discontinued

WolfPack

$600.00
Part Number:
HDTV31028
UPC:
728370335125
Availability:
Discontinued
1:
6x12 Multi-zone Amp w/RS232
2:
70V & 4-Ohm Outputs
3:
Each zone has a built-in -20dB Audio Limiter
4:
Each zone has independent mute triggers
5:
Master global Control In & Control Out
6:
Discontinued
6x12 Audio Multi-zone Amp w/RS232, 70V & 4-Ohm Outputs

This 6x12 Audio Multi-zone Amp w/RS232, 70V & 4-Ohm Outputs is a 12-channel audio distribution amp that can be configured for six stereo 4-8 ohm zones, six stereo 70/100V constant voltage zones, or three high powered 8-ohm bridged zones. It supports any combination of stereo, bridged, and constant voltage zones. It delivers 30 watts per channel into 8 ohms, 50 watts per channel into 4 ohms, or 100 watts into 8 ohms in bridged mode. Each zone can be controlled using the included IR remote control or RS-232 computer control. The RS-232 section is bidirectional, with an easy to configure command structure. It can be configured to automatically send zone status updates or respond to queries to confirm zone status and settings.

6x12 Audio Multi-zone Amp w/RS232, 70V & 4-Ohm Outputs Features:

  • Each zone can independently select a zone-specific stereo audio source or the global unbalanced stereo Audio Bus IN
  • Each zone can be independently configured for stereo 4-ohm/8-ohm mode, high powered bridged 8-ohm mode, or 70V/100V constant voltage mode for total flexibility
  • All zones are independently controllable using the included IR remote control, RS-232 control, and voltage trigger lines
  • Each zone has a built-in -20dB Audio Limiter
  • Each zone has an independent mute trigger input
  • Each zone has an individual Status Output that corresponds to the zone's ON/OFF status
  • Front panel Zone ON and Zone Overload LED indicators for each zone
  • Master global Control In and Control Out
  • Detachable screw-terminal connectors for Zone IR IN, Zone Mute, Zone Status OUT, and Zone Speaker Outputs
  • Global optical S/PDIF and analog stereo 3.5mm audio inputs for the global Audio Bus IN/OUT
  • mountable in a standard 19" equipment rack (2U height)
  • Selectable 110-120 VAC, 60Hz or 220-240 VAC, 50Hz power input

It has an Audio Bus IN, which can be manually selected using the remote control, RS-232 commands, or a voltage trigger. The voltage trigger will switch the zone to use the Audio Bus IN as long as there is voltage present on the zone Line / Bus Trigger IN. When the voltage is removed, the zone automatically switches back to the zone Line IN, making it ideal for global paging across an entire facility. Additionally, each zone has a Mute Trigger IN, which mutes zone audio when voltage is present. Each zone also has a +12 VDC Status or Control OUT, which can be used to activate a zone specific voltage controlled device or otherwise indicate zone ON/OFF status. Audio is rounded out with a built-in -20dB audio limiter for each zone, designed to prevent incidental peaks from becoming irrevocable problems.

Finally, each zone features a Remote Bypass switch, which allows or blocks IR and RS-232 control for those zones that you want to set and not mess with again. You can select 110-120 VAC or 220-240 VAC input voltage, allowing the amp to be used anywhere there is AC voltage. It is rack mountable, with removable rack ears for shelf mounting.

Why not buy this 6x12 Audio Multi-zone Amp w/RS232, 70V & 4-Ohm Outputs today?

6x12 Home Multi-zone Amp w/RS232, 70V & 4-Ohm Outputs Specification:

Model HDTV31028
Number of Zones 6
Continuous Output Power (per zone) 30 watts/channel into 8 ohms@1kHz
50 watts/channel into 4 ohms@1kHz
100 watts bridged into 8 ohms@1kHz
30 watts/channel 70V/100V@1kHz
Frequency Response 20Hz ~ 20kHz ±1dB
Total Harmonic Distortion 0.1%@10W
Signal-to-Noise Ratio 90dB A-weighted 1kHz
Channel Separation 65dB 1kHz
Input Sensitivity 600mV@30W
Bass Control 100Hz ±12dB
Treble Control 10kHz ±12dB
Line Input Impedance 47 kilohms
Master Control Input Voltage +3 ~ +30 VDC@1mA
Master Control Output Voltage +11.5 VDC@1mA ~ +10 VDC@5mA
Zone Line/Bus Trigger Input Voltage +3 ~ +30 VDC@1mA
Zone Mute Trigger Input Voltage +3 ~ +30 VDC@1mA
Zone Status Output Voltage +12 VDC
RS-232 Communications Parameters 9600/8-N-1
RS-232 Flow Control None
Input Power 115 VAC, 60 Hz, 10A or 230 VAC, 50Hz, 5A
Dimensions (without rack ears) 16.9" x 3.5" x 16.4" (430 x 88x 416 mm)
Weight 48.5 lbs. (22 kg)

Why not buy this 6x12 Home Audio Multizone w/RS232, 70V & 4-Ohm Outputs today?