WolfPack 150-Watt Class-D Stereo Power Amplifier

WolfPack

$325.00
Part Number:
MON31027
UPC:
603134687860
Availability:
Ships in 2 to 3 Days
1:
Class‑D Amp Providing 150-Watts/Channel
2:
Bridgeable Output Provides 450 Watts
3:
Rear Panel Volume Gain Adjustment
5:
12‑Volt Trigger for Power‑On/Off
6:
Size: 8.5" x 10..5" x 1.8"

This WolfPack 150-Watt Class-D Stereo Power Amplifier features a stereo speaker output, with support for 4‑ohm and 8‑ohm speakers. The WolfPack 150-Watt Class-D Stereo Power Amplifier can deliver 150 watts per channel into 8‑ohm loads, or 225 watts per channel into 4‑ohm loads. Additionally, the output can be bridged to provide 450 watts to a single 8‑ohm speaker.

The WolfPack 150-Watt Class-D Stereo Power Amplifier includes a buffered loop line output of the original signal for driving another power amplifier for distributed audio systems. The amp can be configured to be always on, signal detection, or triggered power on status. It also includes a 12‑volt trigger output for controlling other devices.

WolfPack 150-Watt Class-D Stereo Power Amplifier Features:

  • Class‑D amplifier, providing 150 watts/channel (RMS) into 8 ohm loads or 225 watts/channel into 4‑ohm loads
  • Bridgeable output provides 450 watts into a single 8‑ohm load
  • 4‑pole detachable speaker screw connector (Euroblock connector) with support for up to 12 AWG speaker wire
  • Buffered loop output of original signal for connecting additional amplifiers
  • Rear panel volume gain adjustment
  • Built-in thermal and short circuit protection circuits
  • Includes rack mount ears for mounting a single amp or two amps side‑by‑side
  • 12‑volt trigger input for power‑on/off
  • 12‑volt trigger output for controlling other devices

Why not buy this WolfPack 150-Watt Class-D Stereo Power Amplifier today?

WolfPack 150-Watt Class-D Stereo Power Amplifier Specifications:

Audio Inputs Stereo analog RCA
Audio Outputs Buffered stereo analog RCA loop output
Output Power 150 watts/channel into 8 ohms with < 0.1% THD+N or
225 watts/channel into 4 ohms with < 0.1% THD+N or
450 watts into a single 8‑ohm load with < 0.1% THD+N
Maximum Speaker Wire Size 12 AWG
Minimum Output Impedance 4 ohms in stereo mode
8 ohms in mono bridged mode
Trigger Input 12 VDC, 10 kΩ
Trigger Output 12 VDC, 100mA
Input Power 100 ~ 240 VAC, 50/60 Hz, 2.5A
Standby Power Consumption ≥ 0.5 watts
Dimensions 8.5" x 10.5" x 1.8" (216 x 267 x 45 mm)

Why not buy this WolfPack 150-Watt Class-D Stereo Power Amplifier today?

WolfPack 150-Watt Class-D Stereo Power Amplifier User Manual

Why not buy this WolfPack 150-Watt Class-D Stereo Power Amplifier today?