WolfPack 4K 30 Hz 1x9 HDMI Splitter with EDID

WolfPack

4K 30 Hz 1x9 HDMI Splitter with EDID
$100.00
Part Number:
HDTV-1x9SPLIT
Availability:
In-Stock
1:
4K 30 Hz 1x9 HDMI Splitter
2:
EDID Management Function
5:
Indicator Light Design
6:
Separate Power Supply Design
7:
Supports 4K UHD
8:
Simultaneous Display of 9 Identical Screens
9:
HDMI Splitter 1 In 9 Out
10:
Support Digital Audio Formats
ADD OPTIONS:

This WolfPack 4K 30 Hz 1x9 HDMI Splitter with EDID refers to a device used to split a single HDMI signal into nine separate HDMI outputs while supporting a maximum resolution of 4K at 30 Hertz (Hz).

4K Resolution: Refers to a display resolution of approximately 3840 pixels × 2160 lines (8.3 megapixels, aspect ratio 16:9) and is one of the standard resolutions for ultra-high-definition television (UHDTV).

30 Hz Refresh Rate: Indicates the number of times per second the image on the screen is refreshed. In this case, it's 30 times per second. While this refresh rate is sufficient for many applications, it's lower than the typical 60 Hz refresh rate, which is more common for smoother motion in video content.

1x9 HDMI Splitter: Means that the device has one input (1x) and nine outputs (9) for HDMI connections. It takes a single HDMI input signal and splits it into nine identical HDMI output signals, allowing you to connect multiple displays or devices to the same video source simultaneously.

EDID (Extended Display Identification Data): This is a standard communication protocol used by displays to communicate their capabilities to a connected source device. The splitter with EDID capability can read the EDID information from the connected displays and ensure that the source device sends an appropriate video signal that is compatible with all connected displays.

WolfPack 4K 30 Hz 1x9 HDMI Splitter with EDID Features:

  • 1x9 HDMI Splitter: HDMI splitter 1 in 9 out, can mirror 1 HDMI input video signal to 9 HDMI output monitors/screens/TVs, supports up to 4K60HZ resolution under YUV420 and is backward compatible with 1080P.
  • EDID Management Function: Supports learning the EDID from the connected monitor or selecting from a variety of pre-programmed EDID settings to ensure that the correct signal resolution is output from the source to the monitor for better display results.
  • Support Digital Audio Formats: 1 In 9 Out HDMI Splitter supports digital audio formats such as DTS-HD/Dolby-trueHd/LPCM7.1/DTS/Dolby-AC3/DSD
  • Plug and Play: 9-port 4K HDMI splitter needs only 1 input signal source such as (e.g. computer) to display 9 same images on 9 TVs, plug and play without any setup driver.
  • HDMI Splitter 1x9: Suitable for TV stores, classrooms, exhibitions, monitoring and other scenarios that display the same image on multiple screens/monitors/televisions.

Why not buy this WolfPack 4K 30 Hz 1x9 HDMI Splitter with EDID today?

What Is a WolfPack Fixed HDMI Matrix Switcher?

A WolfPack Fixed HDMI Matrix Switcher is a single-chassis device that routes any HDMI source — such as a cable box, satellite receiver, streaming player, or computer — to any TV or display in a building, simultaneously and independently. Unlike an HDMI splitter (which sends one source to many screens) or a simple HDMI switch (which selects one source for one screen), a matrix switcher lets you show a different channel on every TV at the same time. HDTV Supply has sold WolfPack fixed matrix switchers to sports bars, restaurants, hotels, churches, schools, and commercial AV integrators since 2000.

Fixed vs. Modular: Which Do You Need?

WolfPack comes in two families: Fixed and Modular. Fixed matrix switchers have a set number of inputs and outputs built into one box — for example, 4 inputs × 4 outputs (4×4) or 8 inputs × 8 outputs (8×8). They are plug-and-play, rack-mountable, and the right choice when your input/output count won't change. Modular matrix switchers use a chassis with swappable I/O cards, scaling from a few ports up to 80×80 or beyond. If you know exactly how many sources and screens you need today, a fixed unit is typically lower cost and simpler to deploy.

Available Fixed WolfPack Configurations

HDTV Supply offers WolfPack Fixed HDMI Matrix Switchers in the following sizes:

  • 4Ă—2 — 4 sources to 2 displays
  • 4Ă—4 — 4 sources to 4 displays
  • 8Ă—8 — 8 sources to 8 displays
  • 8Ă—9 — 8 sources to 9 displays
  • 16Ă—16 — 16 sources to 16 displays
  • 16Ă—32 via CAT6 — extends signal up to 450 feet over CAT6 cable

Select models include built-in video wall processing, multiview, and picture-in-picture (PIP) — allowing two or more sources to display on a single screen simultaneously.

Control Options for Fixed Matrix Switchers

Every WolfPack Fixed HDMI Matrix Switcher supports multiple control methods so you can integrate it into any environment:

  • Front-panel buttons — manual source switching directly on the unit
  • IR remote control — included with most models
  • RS-232 serial control — for integration with Crestron, Control4, AMX, and similar systems
  • TCP/IP (LAN) control — send hex commands over your network from any device
  • Web GUI — browser-based interface for switching without additional software
  • Free iOS and Android apps — available for select WolfPack models

For RS-232 hex command strings and TCP/IP control protocols, see our WolfPack HEX Code Reference and TCP/IP Control Guide.

Frequently Asked Questions

What is the difference between a fixed HDMI matrix switcher and a modular HDMI matrix switcher?

A fixed HDMI matrix switcher has a set number of HDMI inputs and outputs built into a single unit — for example, 8 inputs and 8 outputs. A modular matrix switcher uses a chassis with interchangeable I/O cards, so you can configure it for many different port counts and expand it later. Fixed units are simpler and more affordable; modular units offer flexibility for larger or changing installations.

Can a WolfPack fixed matrix switcher show different channels on different TVs at the same time?

Yes. A matrix switcher routes any input to any output independently. In an 8×8 configuration, all 8 displays can show 8 completely different sources simultaneously, or multiple displays can share the same source — in any combination you choose.

Can I control a WolfPack fixed matrix switcher from a Crestron or Control4 system?

Yes. WolfPack Fixed HDMI Matrix Switchers support RS-232 and TCP/IP control, which are standard integration protocols supported by Crestron, Control4, AMX, and other third-party control systems. HDTV Supply provides hex command strings and driver documentation to support custom integrations.

What resolution do WolfPack Fixed HDMI Matrix Switchers support?

Resolution support varies by model. WolfPack fixed matrix switchers are available in 1080p (Full HD) and 4K 30Hz configurations. Select 4K models also support HDR and HDCP 2.2. Always check the individual product specification sheet for confirmed resolution, color depth, and HDCP version.

How far can I run HDMI from a WolfPack fixed matrix switcher?

Standard HDMI outputs on fixed matrix switchers support runs up to approximately 25–50 feet depending on cable quality and resolution. The WolfPack 16×32 model transmits over CAT6 cabling for distances up to 450 feet per run. For longer distances with other fixed models, HDMI extenders can be added at each display.

What is the best HDMI matrix switcher for a sports bar?

For sports bars with up to 16 TVs, a WolfPack Fixed 16×16 HDMI Matrix Switcher is a popular choice — it handles 16 independent sources (cable boxes, satellite receivers, streaming devices) and routes any of them to any TV. For larger venues with 20–80+ TVs, HDTV Supply's WolfPack Modular Matrix Switchers or AV Over IP systems are typically the better fit. Call 833-WOLFPACK (833-965-3722) for a free consultation.

Need Help Choosing?

HDTV Supply has been helping AV integrators, sports bars, hotels, and homeowners select the right matrix switching system for 25 years. Call us at 833-WOLFPACK (833-965-3722) or email kent@hdtvsupply.com and we'll recommend the right unit for your source count, display count, resolution requirements, and control system.