WolfPack 4K 60 Hz 1x8 HDMI Splitter with EDID and Audio Out

WolfPack 4K 60 Hz 1x8 HDMI Splitter with EDID and Audio Out
$150.00
Part Number:
HDTV-HD-0108
UPC:
793132853933
Availability:
Usually ships the same business day
1:
4K 60 Hz 1x8 HDMI Splitter
2:
Supports Deep Color 30/36bit
3:
Supports xv-YCC
4:
Includes Power Supply
5:
Installs in Minutes
6:
Support Signal Retiming
ADD OPTIONS:

HDTV Supply's WolfPack 4K 30 Hz 1x8 HDMI Splitter with EDID Management is high performance 10.2Gbps 1x4 HDMI Splitter with EDE Management can split 1 HDMI input to 4 HDMI outputs simultaneously. The resolution is up to 4K×2K@50/60Hz YCbCr 4:2:0. HDR and Dolby Vision. In addition, this splitter supports STD and TV modes EDID settings.

4K 60 Hz 1x8 HDMI Splitter with EDID Features:

  • HDCP1.4 compliant
    • Support video bandwidth 10.2 Gbps
    • Video resolution is up to 4K2K@50/60Hz at YCbCr 4:2:0
    • Support 3D, HDR, Dolby Vision function
    • EDID can be selected with STD and TV modes by the switch on panel
      • STD: Output default 1080P@60Hz-2ch
      • TV: Copy HDMI OUT 1 port EDID setting to all outputs. If no EDID is detected on HDMI OUT 1 the unit will output default to 1080P@60Hz-2ch.
  • Supports deep color 30/36bit.
  • Supports xv-YCC.
  • Support deep color 30bit, 36bit
  • Support Blue-Ray 24/50/60fs/HD-DVD/xvYCC
  • Digital audio format, as DTS-HD/Dolby-TrueHD/LPCM7.1/DTS/Dolby-AC3/DSD
  • Support signal retiming
  • Supports HDMI signal retiming with cascading above 3 layers in full-HD 1080p format and 2D and 3D
  • Supports an input HDMI cable up to 30 feet @ AWG22 or AWG24 HDMI standard cable length and an output 50 feet @ a AWG22 (preferred) or AWG24 HDMI cable.
  • No video or audio loss of quality.
  • Installs in minutes.
  • Includes power supply

Why not buy this 4K 30 Hz 1x4 HDMI Splitter with EDID Management today?

4K 30 Hz 1x4 HDMI Splitter with EDID Management Specs:

Technical
HDCP Compliance HDCP 1.4
Video Bandwidth 10.2Gbps
Resolution 4K2K 50/60Hz 4:2:0, 4K2K 30Hz 4:4:4, 1080p, 1080i, 720p, 720i, 480p, 480iAll HDMI 3D TV formatsAll PC resolutions including 1920 x 1200
3D Support Yes
Color Space RGB, YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0
Color Depth 8/10/12-bit
HDMI Audio Formats PCM2.0/5.1/7.1CH, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX,DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD
HDR Formats HDR10, HDR10+, Dolby Vision
ESD Protection Human-body Model: ±8kV (Air-gap discharge), ±4kV (Contact discharge)
Connection
Input Ports 1'HDMI Type A [19-pin female] 1'SERVICE port [5-pin, Mini USB-B]
Output Ports 4'HDMI Type A [19-pin female]
Mechanical
Housing Metal Enclosure
Color Black
Dimensions 163mm(W)'63mm(D)x16mm(H)
Weight 260g
Power Supply Input: AC 100~240V 50/60HzOutput: DC 5V/1A
Power Consumption 1W (max)
Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity 20~90% RH (non-condensing)
Cable Length For 4K60 (YCbCr 4:2:0)- --32ft / 10M; For 1080P---40ft/ 15m

Why not buy this 4K 30 Hz 1x8 HDMI Splitter with EDID Management today?

4K 30 Hz 1x8 HDMI Splitter with EDID Management User Manual

Why not buy this 4K 30 Hz 1x8 HDMI Splitter with EDID Management today?

What Is a WolfPack Fixed HDMI Matrix Switcher?

A WolfPack Fixed HDMI Matrix Switcher is a single-chassis device that routes any HDMI source — such as a cable box, satellite receiver, streaming player, or computer — to any TV or display in a building, simultaneously and independently. Unlike an HDMI splitter (which sends one source to many screens) or a simple HDMI switch (which selects one source for one screen), a matrix switcher lets you show a different channel on every TV at the same time. HDTV Supply has sold WolfPack fixed matrix switchers to sports bars, restaurants, hotels, churches, schools, and commercial AV integrators since 2000.

Fixed vs. Modular: Which Do You Need?

WolfPack comes in two families: Fixed and Modular. Fixed matrix switchers have a set number of inputs and outputs built into one box — for example, 4 inputs × 4 outputs (4×4) or 8 inputs × 8 outputs (8×8). They are plug-and-play, rack-mountable, and the right choice when your input/output count won't change. Modular matrix switchers use a chassis with swappable I/O cards, scaling from a few ports up to 80×80 or beyond. If you know exactly how many sources and screens you need today, a fixed unit is typically lower cost and simpler to deploy.

Available Fixed WolfPack Configurations

HDTV Supply offers WolfPack Fixed HDMI Matrix Switchers in the following sizes:

  • 4Ă—2 — 4 sources to 2 displays
  • 4Ă—4 — 4 sources to 4 displays
  • 8Ă—8 — 8 sources to 8 displays
  • 8Ă—9 — 8 sources to 9 displays
  • 16Ă—16 — 16 sources to 16 displays
  • 16Ă—32 via CAT6 — extends signal up to 450 feet over CAT6 cable

Select models include built-in video wall processing, multiview, and picture-in-picture (PIP) — allowing two or more sources to display on a single screen simultaneously.

Control Options for Fixed Matrix Switchers

Every WolfPack Fixed HDMI Matrix Switcher supports multiple control methods so you can integrate it into any environment:

  • Front-panel buttons — manual source switching directly on the unit
  • IR remote control — included with most models
  • RS-232 serial control — for integration with Crestron, Control4, AMX, and similar systems
  • TCP/IP (LAN) control — send hex commands over your network from any device
  • Web GUI — browser-based interface for switching without additional software
  • Free iOS and Android apps — available for select WolfPack models

For RS-232 hex command strings and TCP/IP control protocols, see our WolfPack HEX Code Reference and TCP/IP Control Guide.

Frequently Asked Questions

What is the difference between a fixed HDMI matrix switcher and a modular HDMI matrix switcher?

A fixed HDMI matrix switcher has a set number of HDMI inputs and outputs built into a single unit — for example, 8 inputs and 8 outputs. A modular matrix switcher uses a chassis with interchangeable I/O cards, so you can configure it for many different port counts and expand it later. Fixed units are simpler and more affordable; modular units offer flexibility for larger or changing installations.

Can a WolfPack fixed matrix switcher show different channels on different TVs at the same time?

Yes. A matrix switcher routes any input to any output independently. In an 8×8 configuration, all 8 displays can show 8 completely different sources simultaneously, or multiple displays can share the same source — in any combination you choose.

Can I control a WolfPack fixed matrix switcher from a Crestron or Control4 system?

Yes. WolfPack Fixed HDMI Matrix Switchers support RS-232 and TCP/IP control, which are standard integration protocols supported by Crestron, Control4, AMX, and other third-party control systems. HDTV Supply provides hex command strings and driver documentation to support custom integrations.

What resolution do WolfPack Fixed HDMI Matrix Switchers support?

Resolution support varies by model. WolfPack fixed matrix switchers are available in 1080p (Full HD) and 4K 30Hz configurations. Select 4K models also support HDR and HDCP 2.2. Always check the individual product specification sheet for confirmed resolution, color depth, and HDCP version.

How far can I run HDMI from a WolfPack fixed matrix switcher?

Standard HDMI outputs on fixed matrix switchers support runs up to approximately 25–50 feet depending on cable quality and resolution. The WolfPack 16×32 model transmits over CAT6 cabling for distances up to 450 feet per run. For longer distances with other fixed models, HDMI extenders can be added at each display.

What is the best HDMI matrix switcher for a sports bar?

For sports bars with up to 16 TVs, a WolfPack Fixed 16×16 HDMI Matrix Switcher is a popular choice — it handles 16 independent sources (cable boxes, satellite receivers, streaming devices) and routes any of them to any TV. For larger venues with 20–80+ TVs, HDTV Supply's WolfPack Modular Matrix Switchers or AV Over IP systems are typically the better fit. Call 833-WOLFPACK (833-965-3722) for a free consultation.

Need Help Choosing?

HDTV Supply has been helping AV integrators, sports bars, hotels, and homeowners select the right matrix switching system for 25 years. Call us at 833-WOLFPACK (833-965-3722) or email kent@hdtvsupply.com and we'll recommend the right unit for your source count, display count, resolution requirements, and control system.