HDTV Supplys WolfPack 4K 2x2 Video Wall Processor is a 4K based video wall processor which allows one HDMI input to be arranged on to four 4K displays. It offers bezel correction support with a simple and easy to use control application. The video wall controller supports video output timings up to 1080p@60Hz. It sends one source to 4 - TVs showing one large picture. This 4K 2x2 Video Wall has the following switch selectable inputs of HDMI, DP and MHL.

The 4K 2x2 Video Wall Processor can be used for a single source or multiple sources by manually switching the corresponding port via the remote control. The 4K 2x2 Video Wall supports an HDMI 1.4 input with a maximum support of 3840x2160@30Hz and is backwards compatible. When using an MHL to HDMI cable it can be compatible with MHL output devices such as a MHL phone and pad, etc.

NOTE: 4K@60Hz means the whole video wall resolution. For example, a normal 1080p 2x2 video wall means the whole 4-TVs are only 1080p but our 4K 2x2 is 4K@60Hz. across all TVs.

WolfPack 4K 2x2 Video Wall Processor Features:

• Inputs: 1-HDMI (HDMI 2.0), 1-Displayport and 1-MHL source (HDMI 1.4)
• HDCP 2.2 & HDMI 2.0 Compliant
• 4K@60 4:4:4 @ 18Gbps Compatible
• Supports 180 degree image flip function for each screen.
• Supports separate audio out
• Supports direct-play from an USB disk with all kinds of Audio / Video media format
• Front panel buttons for input source selection, output port configuration, bezel adjustment & setup
• Supports 180 degree rotation for bottom-thick bezel screens
• Controllable via front panel buttons and a supplied IR remote control

The WolfPack 4K 2x2 Video Wall processor can function as a 2x2 video wall controller so if you have 4-widescreens you can make up one giant video image. You will need 4-matched TVs and wall mounts (not supplied).

Why not buy this 4K 2x2 Video Wall Processor today?