HDTV Supplys WolfPackLite 1080p 16x32 HDMI Matrix Switch w/32-HDBaseT CAT6 Receivers switches both audio and video signals. Because it is a matrix switcher, it allows any input to be routed to any output; or the same input to be routed to all outputs, or any combination. This WolfPackLite™ 16x32 HDMI Matrix Switch with 32-HDBaseT CAT6 Receivers are designed to allow the switching and distribution 16 HDMI inputs to 32 HDMI outputs. The WolfPackLite™ 1080p 16x32 HDMI Matrix Switch w/32-HDBaseT CAT6 Extenders is a top of the line digital matrix switcher made for the demands of today's HDMI (High-Definition Multimedia Interface) routing. Created to route your systems HDMI signals to go to 32 outputs from 16 inputs the 16x32 HDMI Matrix Switch w/32-HDBaseT CAT6 Extenders delivers high performance up to 220 feet. It also has optional Crestron Modules & Control4 Drivers.
The Card Cage chassis has 36 - input slots and 36 - output slots. The HDMI input and HDMI or HDBaseT output cards are 1 - port HDMI cards having 1 - HDMI connectors on each card. If one populates the complete chassis it configures to a 36x36 HDMI Switcher. Shown below is the configuration for this 16x32 HDMI Matrix Switch w/32 HDBaseT CAT6 Receivers.
Creating Text and putting it over the source pictures: All sizes of these matrix switches allow you to add text over the incoming source devices. An example would be: "Try our New Salami Pizza" and put that phrase over the video coming in from a DirecTV receiver. This allows restaurants, sports bars and clubs to create anything they would want for the visitors to read. It is simple to install with the software that you get, just go to Input Source Setting and put all input sources are put in the left side of the software interface. Right-click the corresponding input source to pop up the following interface: Subtitles: Text over the input source and add your text. The text color and position are adjustable.
WolfPackLite 16x32 HDMI Matrix Switch w/32-HDBaseT CAT6 Extenders Configuration:
- 1 - 36x36 card cage chassis
- 16 - 1-port HDMI input cards = 16 - 1080p HDMI inputs
- 32 - 1-port HDMI output cards = 32 - 1080p RJ45 HDBaseT outputs
- 32 - Receivers to 220 feet at 1080p w/PoC
WolfPackLite 1080p 16x32 HDMI Matrix Switch w/32-HDBaseT CAT6 Extenders Features:
- Uses a 36x36 Card Cage Chassis
- 1080p Switching of up to 16 HDMI sources to 32 displays
- 16-Presets to save for often used configurations
- HDCP 1.4 and HDMI 1.4 backwards compatible
- LCD front panel for status
- Supports 3D pass-through
- Supports High Speed HDMI 1.3 Specifications
- Supports full 1080 / 60
- Supports DDC transmission
- Supports Dolby Digital-True HD and DTS-HD
- Control via its remote control, RS-232 and front-panel buttons
- Full RS-232 control for incorporating third party control systems
NOTE: This HDMI Matrix Switcher has an option to add a 1080p Rack Mount 7" inch Dual Color Display (shown) for you to select & see screens of what is happening in your matrix system located in other rooms. It requires the dedicated use of 2-of the HDMI outputs to wire to the 2-HDMI inputs of the dual display. Those 2-Matrix HDMI outputs cannot be used for anything else so count the number of outputs you need and add two (2) more to see if this matrix fulfills your needs. Also, the sources feeding the displays must be set at 1080p.
Our WolfPack™ Seamless HDMI Matrix Switchers allow (100ms = 0.1 sec) seamless switching that ensures no switching delay and no picture loss during transitions. The instantaneous video switching delivers full 1080p video powered by our WolfPack engine implemented at each output port. This high-performance engine processes HDMI signals by executing EDID hops and HDCP handshakes simultaneously at both the source input and the display outputs and scaling inputs for the best output resolution while setting the output clock timing by using a frame buffer to retain the input signal information for the fastest output.
Streaming between the source and display units is easily controlled through our HDMI 16x32 Matrix interface. HDCP key authentication will no longer be an issue when using our switcher. Control for our unit is varied and easily accessible. Enabled RS-232 commands is provided for advanced user control management. It also has optional Crestron Modules & Control4 Drivers.
Why not buy this 16x32 HDMI Matrix Switch w/32-HDBaseT CAT6 Receivers & Video Wall today?
Internal Video Wall Processor: Not only is this product an HDMI matrix switch its design is specially designed to support the video wall configurations. You can even select from 16-presets to access often viewed video sets.
- 1x2, 1x3 thru 1x10 and more
- 2x1, 3x1 thru 10x1 and more
- 2x2, 2x3 thru 2x10 and more
- 3x3, 3x3 thru 4x4 and more
Example 1: Create a 2x2 Video Wall using 4-TVs with either one large picture or 4-individual pictures at one, or multiple locations.
Example 2: Create a 3x3 Video Wall using 9-TVs with either one large picture or 9-individual pictures at one, or multiple places.
WolfPackLite HDMI Matrix Switch Specs:
- I/O card board: 1 - HDMI port/card
- Input Connector: HDMI A female; T.M.D.S. 2.9V/3.3V, 75 ohms
- Video Output: HDMI A female; T.M.D.S. 2.9V/3.3V; 75 ohms
- Gain: 0 dB
- Resolution: Up to 1080p 4:4:4 or 4K/30
- HDMI Standard: HDCP 1.4 - supports CEC, EDID and DDC and compliant with HDCP
- Control Options: Buttons, IR remote & RS232 (9-pin female D connector)
- Worldwide Power Supply: 100VAC ~ 240VAC, 50/60Hz; 50W
- Temperature: -10 ~ 50 degrees C
- Working Humidity: 10 ~ 90 degrees
- Regulation: CE, FCC and CCC
WolfPackLite HDMI Matrix Switch Specs:
- Gain: 0 dB
- Bandwidth: 340 MHz (10.2 Gbit/s)
- Video Signal: HDMI (or DVI-D)
- Maximum Pixel Clock: 165MHz
- Resolution Range: Up to 4K 30
WolfPackLite HDMI Matrix Switch Input:
- Inputs: Up to 36 HDMI
- Input Connector: HDMI 1.4 & HDCP 1.4
- Input Level: T.M.D.S. 2.9V/3.3V
- Input Impedance: 75 ohms
WolfPackLite HDMI Matrix Switch Output:
- Outputs: Up to 36 outputs
- Output Connector: HDMI 1.4 & HDCP 1.4
- Output Level T.M.D.S. 2.9V/3.3V
- Output Impedance: 75 ohms
Other WolfPackLite Modular HDMI Matrix Switch Specs:
- Input cable distance: ~25 feet AWG24 HDMI 1.4 high speed cable
- Output cable distance: ~35 feet AWG24 HDMI 1.4 high speed cable
- HDCP Management: Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI 1.4 standards. The built-in HDCP management technology can analyze HDCP key authentication and realize the handshake internally.
- Serial Control Port: RS-232, 9-pin female D connector with a pin configuration of 2 = TX, 3 = RX, 5 = GND
- IR Remote: Yes
- Front Panel Control: Buttons
Why not buy this 16x32 HDMI Matrix Switch w/32-HDBaseT CAT6 Receivers & Video Wall today?
Reasons To Buy an HDTV Supply WolfPack Product
Why not buy this 16x32 HDMI Matrix Switch w/32-HDBaseT CAT6 Receivers & Video Wall today?
Control Drivers
DirecTV Controller
HDTV Supply has successfully installed our WolfPack, WolfPackLite and our other HDMI Matrix Switchers in Sports Bars, Restaurants, Bowling Alleys, Fitness Centers, Malls, Places of Worship, Data Centers, Gaming Rooms, Nail Salons, County Clubs, Casinos, Factories, Conference Rooms, Schools, Home Theaters or many other installations requiring HDMI matrix switching. The reason, we are told by the users, is the number of features we offer compared to other companies they looked at. These modular HDMI matrix switchers can usually be integrated with many third party control systems using the RS232 port on the back of the matrix.
For experienced hardware & software professionals who want to write their own drivers for 3rd party control systems from:
- AMX™
- Control4™
- Creston™
- RTI™
- DTVGameControl™
- Elan g!™
- Media Switcher™
- OnControls™
- Savant™
- SimpleControl™
- SwitchItUp™
- SAVI Control™
- URC Control™
...we have created a simple and very easy to use RS232 script to write your own drivers.
EXAMPLE: If you want to switch input 8 to output 1, 8, 16, the RS232 command would be 8V1.8.16.
How to use the info:
END USER: If you are an end user and want to have a whole-house control system from any of the above 3rd party control houses but your budget can't support the price you were quoted, do the following:
- Call us for a quote
- Once you get our quote call a 3rd party control reseller or installer in your area and tell them "Here is the hardware I want to use, please give me a quote on writing the software and installing all of the hardware at my location." You usually can save $1,000s on larger systems.
CAVEAT: We are not certified by any of the above 3rd party control systems companies nor have the necessary hardware to verify, troubleshoot and support the 3rd party writing of the code. We do warranty, though, that the RS232 script in the above RS232 Users Manual has and will work to control the matrix directly.
Why not buy this 16x32 HDMI Matrix Switch w/32-HDBaseT CAT6 Receivers & Video Wall today?
A: Yes, all cards have a 3.5 mm audio input and 3.5 mm audio output. Here is a download link of our cards pictures: Modular Matrix Card Pictures
Q: What are the chassis sizes, weights and shipping costs to New York City, N.Y. 10111?
A: See Below:
| Model | 04X04 | 08X08 | 17X17 | 36X36 | 72X72 | PRO 17 | PRO 36 |
| Chassis Size: | 1U | 2.5U | 5U | 11U | 20U | 2.5U | 5U |
| Dimension: | 17.32x13.78x1.77 | 17.32x13.78x3.90 | 17.32x13.78x8.78 | 17.32x15.75x19.29 | 17.32x15.75x35.04 | 17.32x13.78x3.90 | 17.32x13.78x8.78 |
| Weight: | 15.43 | 27.56 | 46.3 | 77.16 | 143.3 | 27.56 | 46.3 |
| Shipping Cost to Zip code 10111: | $90 | $120 | $135 | $400 | $485 | $120 | $135 |
Why not buy this 16x32 HDMI Matrix Switch w/32-HDBaseT CAT6 Receivers & Video Wall today?
HDTV Supply's WolfPack Family of Matrix Switchers can be created however you wish. Just SCROLL DOWN and fill out the below and press SUBMIT and we will send you a quotation based upon your needs within an hour.
If it doesn't meet your needs just call us right now at 833-WOLFPACK or 833-965-3722 or email us at support@hdtvsupply.com
