This Zenty ZT-429 4K 60Hz 4:4:4 HDBaseT HDMI Extender over Cat5e/6 with Dual Outputs 130ft & 230ft Receiver Only can transmit an Ultra-High Definition 4K signal up to 40m(130 feet) using the latest HDBaseT transmission protocol. Connect up to 3 displays at once by utilizing the Local Loop Out HDMI port located on the Transmitter, and the 2 HDMI outputs on the Receiver. Powered by bi-directional PoC, the ZT-EXB40 only requires power to be connected to either the receiver or the transmitter, allowing for a simple and convenient installation. The extender uses features multiple EDID settings, including pass-through, a Local copy, and a remote Copy, which can be changed with a simple switch on the Transmitter. The device also passes RS-232 commands, to control devices for serial communication transmission of data.
Zenty ZT-429 4K 60Hz 4:4:4 HDBaseT HDMI Extender over Cat5e/6 with Dual Outputs 130ft & 230ft Receiver Only Features:
- Bandwidth up lo 18Gbps, resolution up lo 4k 60hz YUV 4:4:4
- Transmit up to 70m under 1080p, 130ft. / 40m under 4k
- Supports HDR10, 3D
- With 1 x looping HDMI out at Transmitter and 2 x HDMI out at Receiver
- Bi-directional wide band IR and RS232 Pass through
- Dual PoC (Receiver powered by transmitter or transmitter powered by Receiver)
- HDCP 2.2 / HDCP 1 .4 Compliant
Why not buy this Zenty ZT-429 4K 60Hz 4:4:4 HDBaseT HDMI Extender over Cat5e/6 with Dual Outputs 130ft & 230ft Receiver Only from HDTV Supply today?
Zenty ZT-429 4K 60Hz 4:4:4 HDBaseT HDMI Extender over Cat5e/6 with Dual Outputs 130ft & 230ft Receiver Only Specification:
- Operating Temperature Range: -10°C ~ 55°C (14°F ~ 131°F)
- Operating Humidity Range: 5% – 90% RH (Non-condensing)
- Input Video Signal: 0.5 – 1.0 Volts p-p
- Input DDC Signal: 5 Volts p-p (TTL)
- Video Format Support: DTV / HDTV; 4K, 1080P, 1080i, 720P (50Hz), 576P, 480P, 576i, 480i
- Output Video: HDMI 2.0, HDCP 1.4 / 2.2
- Output Audio: Supports DTS-HD, Dolby-HD
- Maximum Transmission Distance: 1080P up to 230 ft / 70 m, 4K up to 130 ft / 40 m
- Power Supply: 24V / 1A
- PoC: Power from TX to RX over Cat5e/6 cable
- Power Consumption: 12W
- Dimensions (H x W x D): 139.4mm x 66.8mm x 20mm (5.49” x 2.63” x 0.79”)
- Mass (Main Unit): 1.2 lbs (Pair)
