This Zenty ZT-130 Modular Matrix 4K 30Hz HDBaseT Input Card 328ft is a 1-card 1-port 4K30 HDBaseT input card which is to be used with Zenty chassis, including 9x9, 16x16, 18x18 and 36x36. It supports HDMI loop out or this HDMI loop can be used for the EDID management function by working with the DIP switch on the card. It also supports bi directional IR and the RS232 transmission. It uses HDBaseT technology so it can support POC for the HDBaseT transmitters. The distance can up to 230ft. (70m) for 4K30 or 330ft. (100m) for 1080P.
Zenty ZT-130 Modular Matrix 4K 30Hz HDBaseT Input Card 328ft Features:
- Output resolution up to 4K30
- Supports HDBaseT input with one HDMI loop out
- Distance up to 70m/220ft at 4K30 or 100m/330ft at 1080P over single Cat6/7
- Supports RS232, bi-directional IR
- PoC (Power over Cable) function
Why not buy this Zenty ZT-130 Modular Matrix 4K 30Hz HDBaseT Input Card 328ft from HDTV Supply today?
Zenty ZT-130 Modular Matrix 4K 30Hz HDBaseT Input Card 328ft Specification:
- Inputs: 1 x HDBaseT In (RJ-45)
- Outputs: 1 x HDMI In (19-pin Type-A)
- EDID: 4-pin DIP switch for internal EDID or simulating from the display
- Latency: 15 – 30 ms
- Audio Formats: 2ch PCM, DTS-HD Master, TrueHD
- Video Resolutions and Cable Distances:
- 720P @ 60Hz 12-bit: Up to 330 ft / 100 m
- 1080P @ 30Hz 12-bit: Up to 330 ft / 100 m
- 1080P @ 60Hz 12-bit: Up to 330 ft / 100 m
- 2160P @ 20Hz 8-bit: Up to 220 ft / 70 m
- Standards / Protocol: HDCP 1.4
- Maximum Pixel Clock: HDMI: 296 MHz
- Communication and Protocol: HDBaseT, HDMI, HDCP 1.4, EDID, PoH / PoC, Bidirectional IR, RS232
- IR: 1 x IR RX (3.5mm), 1 x IR TX (3.5mm)
- RS232: 3-pin Phoenix connector
- Power Supply: Internal to / from matrix
