Thor Broadcast H-4GPS-SMF 4 Channel GPS over 4 Single Mode Fibers

Thor Broadcast

Price: $11,994.00
Today's Price: $9,995.00

5% Discount. Apply Code 5percentOff at Checkout!

Part Number:
H-4GPS-SMF
UPC:
793132855548
Condition:
New
Availability:
In Stock
1:
Provides up to 4 Redundant GPS Links
2:
Ideal for Broadcasting Towers
3:
Dual Redundant Power Supplies
4:
Provides a Fiber Security Break
5:
Free USA Shipping
6:
Ships with the latest firmware
7:
2-Year Warranty

This Thor Broadcast H-4GPS-SMF 4 Channel GPS over 4 Independent Single Mode Fibers is a transmitter and receiver pair used to transmit the RF Carrier signal from a GPS antenna to a remote location up to 10 Km. There are many advantages to converting the GPS Carrier to an optical signal for GPS over fiber. Fiber Optic cable is much less expensive than low loss coaxial cable used for RF signals. It is also much smaller and easier to work with. Optical signals are not affected by RF interference, therefore this system can be used to transport a GPS signal over fiber through a noisy RF environment.

The F-GPSF can also be used to transport the GPS signal over fiber from a single GPS antenna to a multitude of locations throughout a building, aircraft, or ship. This Fiber Optic GPS Antenna Link is a complete system which allows us to convert the GPS Carrier from RF to Light, transmit it up to 20 Kilometers if need be then reconvert it to RF to be received by the GPS Receiver. Global positioning systems (GPS), used for navigation, relies on signals from satellites in a geosynchronous orbit around the earth. This synchronization is required for personal communications systems (PCS) such as cellular telephones. PCS base station signals using fiber optic transmitters and receivers experience low loss and high quality. In addition, smaller, less expensive power amplifiers can be mounted to the tower reducing transmission losses and system cost.

Fiber's dielectric properties also reduce damage from lightning strikes at PCS base stations. Fiber optic L-Band , GPS links can also be used as an outside repeater in shopping malls, tunnels, and subways where PCS signals are non-existent or extremely weak, allowing L-Band satellite transport . Thor Fiber F-GPS systems are available to support the remote location of industrial GPS antennas. These kits are assembled and tuned to the unique requirements of each application. Thor GPS over fiber systems are a solution for the distance limitation between maritime or government GPS antennas and radio signal receiver equipment. Typically any sensor equipment or tuning hardware such as universal time receivers or GPS navigation gear must be installed and located within 100 ft of the antenna system.

Most modern industrial type systems require antennas with a clear view of the horizon to function properly. In the case of large ocean going vessels, underground military installations, or large buildings or structures; it can be a challenge to install GPS equipment within 100 ft of a suitable antenna location. Thor solves this problem by extending the distance to over 20 miles by converting the GPS signal from the antenna from coax to fiber optic cable. F-GPS systems are available in a variety of form factors, and can be custom tuned to individual users applications.

Thor Broadcast H-4GPS-SMF 4 Channel GPS over 4 Independent Single Mode Fibers Features:

  • Extends the range between GPS antennas and equipment to over 20 miles
  • Provides up to 4 redundant GPS links for highly reliable systems
  • Fiber links are immune to RF interference problems associated with coax
  • Ideal for broadcasting towers, cell sites, military installations, and large ships
  • Dual redundant power supplies can be ordered for either AC or DC power
  • Provides a fiber security break and insulates from lightning strikes

Why not buy this Thor Broadcast H-4GPS-SMF 4 Channel GPS over 4 Independent Single Mode Fibers today?

What Is a WolfPack Fixed HDMI Matrix Switcher?

A WolfPack Fixed HDMI Matrix Switcher is a single-chassis device that routes any HDMI source — such as a cable box, satellite receiver, streaming player, or computer — to any TV or display in a building, simultaneously and independently. Unlike an HDMI splitter (which sends one source to many screens) or a simple HDMI switch (which selects one source for one screen), a matrix switcher lets you show a different channel on every TV at the same time. HDTV Supply has sold WolfPack fixed matrix switchers to sports bars, restaurants, hotels, churches, schools, and commercial AV integrators since 2000.

Fixed vs. Modular: Which Do You Need?

WolfPack comes in two families: Fixed and Modular. Fixed matrix switchers have a set number of inputs and outputs built into one box — for example, 4 inputs × 4 outputs (4×4) or 8 inputs × 8 outputs (8×8). They are plug-and-play, rack-mountable, and the right choice when your input/output count won't change. Modular matrix switchers use a chassis with swappable I/O cards, scaling from a few ports up to 80×80 or beyond. If you know exactly how many sources and screens you need today, a fixed unit is typically lower cost and simpler to deploy.

Available Fixed WolfPack Configurations

HDTV Supply offers WolfPack Fixed HDMI Matrix Switchers in the following sizes:

  • 4Ă—2 — 4 sources to 2 displays
  • 4Ă—4 — 4 sources to 4 displays
  • 8Ă—8 — 8 sources to 8 displays
  • 8Ă—9 — 8 sources to 9 displays
  • 16Ă—16 — 16 sources to 16 displays
  • 16Ă—32 via CAT6 — extends signal up to 450 feet over CAT6 cable

Select models include built-in video wall processing, multiview, and picture-in-picture (PIP) — allowing two or more sources to display on a single screen simultaneously.

Control Options for Fixed Matrix Switchers

Every WolfPack Fixed HDMI Matrix Switcher supports multiple control methods so you can integrate it into any environment:

  • Front-panel buttons — manual source switching directly on the unit
  • IR remote control — included with most models
  • RS-232 serial control — for integration with Crestron, Control4, AMX, and similar systems
  • TCP/IP (LAN) control — send hex commands over your network from any device
  • Web GUI — browser-based interface for switching without additional software
  • Free iOS and Android apps — available for select WolfPack models

For RS-232 hex command strings and TCP/IP control protocols, see our WolfPack HEX Code Reference and TCP/IP Control Guide.

Frequently Asked Questions

What is the difference between a fixed HDMI matrix switcher and a modular HDMI matrix switcher?

A fixed HDMI matrix switcher has a set number of HDMI inputs and outputs built into a single unit — for example, 8 inputs and 8 outputs. A modular matrix switcher uses a chassis with interchangeable I/O cards, so you can configure it for many different port counts and expand it later. Fixed units are simpler and more affordable; modular units offer flexibility for larger or changing installations.

Can a WolfPack fixed matrix switcher show different channels on different TVs at the same time?

Yes. A matrix switcher routes any input to any output independently. In an 8×8 configuration, all 8 displays can show 8 completely different sources simultaneously, or multiple displays can share the same source — in any combination you choose.

Can I control a WolfPack fixed matrix switcher from a Crestron or Control4 system?

Yes. WolfPack Fixed HDMI Matrix Switchers support RS-232 and TCP/IP control, which are standard integration protocols supported by Crestron, Control4, AMX, and other third-party control systems. HDTV Supply provides hex command strings and driver documentation to support custom integrations.

What resolution do WolfPack Fixed HDMI Matrix Switchers support?

Resolution support varies by model. WolfPack fixed matrix switchers are available in 1080p (Full HD) and 4K 30Hz configurations. Select 4K models also support HDR and HDCP 2.2. Always check the individual product specification sheet for confirmed resolution, color depth, and HDCP version.

How far can I run HDMI from a WolfPack fixed matrix switcher?

Standard HDMI outputs on fixed matrix switchers support runs up to approximately 25–50 feet depending on cable quality and resolution. The WolfPack 16×32 model transmits over CAT6 cabling for distances up to 450 feet per run. For longer distances with other fixed models, HDMI extenders can be added at each display.

What is the best HDMI matrix switcher for a sports bar?

For sports bars with up to 16 TVs, a WolfPack Fixed 16×16 HDMI Matrix Switcher is a popular choice — it handles 16 independent sources (cable boxes, satellite receivers, streaming devices) and routes any of them to any TV. For larger venues with 20–80+ TVs, HDTV Supply's WolfPack Modular Matrix Switchers or AV Over IP systems are typically the better fit. Call 833-WOLFPACK (833-965-3722) for a free consultation.

Need Help Choosing?

HDTV Supply has been helping AV integrators, sports bars, hotels, and homeowners select the right matrix switching system for 25 years. Call us at 833-WOLFPACK (833-965-3722) or email kent@hdtvsupply.com and we'll recommend the right unit for your source count, display count, resolution requirements, and control system.