Thor Broadcast F-SDI-3G-B-Tx/Rx 1Ch Bidirectional SD/HD/3G-SDI Transmitter & Receiver Kit

Thor Broadcast

Price: $1,618.80
Today's Price: $1,349.00

5% Discount. Apply Code 5percentOff at Checkout!

Part Number:
F-SDI-3G-B-Tx/Rx
Condition:
New
Availability:
In Stock
1:
Industrial Grade Design
2:
Support For Pathological Signal
3:
Constant Output Optical Power
4:
No Setup Required
5:
Free USA Shipping
6:
Authorized Thor Direct Warranty
7:
2-Year Warranty

This Thor Broadcast F-SDI-3G-B-Tx/Rx 1Ch Bidirectional SD/HD/3G-SDI Transmitter & Receiver Kit stands out from competitors primarily due to its true broadcast-grade quality and use of pure hardware architecture. While many similar converters on the market rely on software-based processing, which can introduce latency or compatibility issues, this unit offers zero-compression, zero-delay transmission with superior signal integrity.

Its full compliance with SMPTE standards (including 424M for 3G-SDI) ensures that it works seamlessly with professional video equipment, and its ability to handle pathological test patterns gives it an edge in environments where signal reliability is non-negotiable.

Another key advantage is its longer transmission range and versatility. Many competing SDI-to-fiber converters are limited to shorter distances or require dual fibers for bidirectional communication. The F-SDI-3G-B-TX/RX supports bidirectional video over a single fiber up to 20 kilometers without repeaters, reducing installation complexity and cost.

It also supports CWDM (Coarse Wavelength Division Multiplexing), allowing for scalable multi-channel setups—something not typically available in entry-level or mid-range devices.

Additionally, its rugged industrial design and modular flexibility provide significant operational benefits over competing products. Combined with robust safety features, extreme temperature tolerance, and plug-and-play ease of use, the F-SDI-3G-B-TX/RX delivers a professional-grade solution that goes well beyond the capabilities of typical SDI fiber converters.

Thor Broadcast F-SDI-3G-B-Tx/Rx 1Ch Bidirectional SD/HD/3G-SDI Transmitter & Receiver Kit Features:

  • DVB-ASI, SMPTE424M, SMPTE292M, and SMPTE259M (C) standards;
  • 1ms delay
  • APC circuit, constant output optical power, wide dynamic range
  • Optical CWDM multiplexing  technology achieve instant Bi-Directional signal transmission at the same time
  • It can handle distortion very well
  • Industrial grade design, modular design makes the equipment reliable and flexible
  • Single multi, distance of up to 20 kilometers
  • Support for pathological signal
  • Equalizer signal; it will truly reflect the design state of the equalizer.
  • Effectively balance and process the coaxial cable signals of different distances within a certain range to ensure the integrity of the signals
  • Plug and play, no setup required
  • Sold as a set. Note that devices are distinguished between transmitter and receiver

Why not buy this Thor Broadcast F-SDI-3G-B-Tx/Rx 1Ch Bidirectional SD/HD/3G-SDI Transmitter & Receiver Kit from HDTV Supply today?

Thor Broadcast F-SDI-3G-B-Tx/Rx 1Ch Bidirectional SD/HD/3G-SDI Transmitter & Receiver Kit Specification:

Fiberparameter
Wavelength 1310nm-1470nm
Rate 3G bps
Transmitter power >-6db
Receiver sensitivity >-14db
Fiber type Single mode, single fiber
Distance 20km
Fiber connector ST/PC
Videoparameter
Signal type DVB –ASI, SD-SDI, HD-SDI, 3G-SDI
Work standards DVB-ASI , SMPTE259M-C , SMPTE292M , SMPTE424M
Bit rates 270 Mbps, 1.485Gbps, 2.97Gbps
Video input/output
Signal type 1channel DVB-ASI, SD-SDI, HD-SDI, 3G-SDI digital video
Input impedance 75 Ohm
Clock recovery When 270 Mbps, 1.485 Gbps, and 2.97Gbps are automatic, the others are bypassed
Input level 800mVp-p±10%
Enter the echo loss >10dB @ 2.97 Gbps
Output DC offset <±0.5V
Output echo loss >10dB @ 2.97 Gbps
The biggest shake <0.1UI(1485Mbps)
Signal overshoot <5% (1485Mbps)
Equipment information
Product size 192*167*28mm  / 7.56 × 6.57 × 1.10 inches
Product net weight (pair) 0.45KG
Product weight (including the outer packaging) 2.5KG
Packing size 345*210*90mm /13.58 × 8.27 × 3.54 inches
Input voltage 100VAC ~ 242VAC,50-60Hz
Power supply DC 5V
Power dissipation <1.5W
Other parameter
Operating temperature-20°C ~75°C
Storage temperature -40°C ~85°C
Relative humidity From 5 to 95% (non-condensing)
MTBF (Mean Time Between Failures) > 100,000 hours

Why not buy this Thor Broadcast F-SDI-3G-B-Tx/Rx 1Ch Bidirectional SD/HD/3G-SDI Transmitter & Receiver Kit from HDTV Supply today?

Thor Broadcast F-RF-Tx-MN-2mW-1550 Data Sheet

Why not buy this Thor Broadcast F-SDI-3G-B-Tx/Rx 1Ch Bidirectional SD/HD/3G-SDI Transmitter & Receiver Kit from HDTV Supply today?