This Thor Broadcast F-GET-4ET-A/B 4-Port 10/100/1000 Mbps Gigabit Ethernet Transceiver over Single Fiber transmits five 10/100/1000 Mbps Ethernet channels over a single-mode fiber using WDM technology—one strand, full-duplex.
It allows you to connect multiple Ethernet devices on each end, such as IP cameras, PCs, network switches, Wi-Fi routers, and IP encoders—supporting up to 4 devices per side, making connectivity simple and efficient.
The unit functions as a transparent, unmanaged switch with plug-and-play operation—no configuration required. It uses LC/PC connectors and supports transmission distances up to 20km.
A complete link requires a matched A/B pair (Side A transmits at 1310nm, Side B at 1550nm).
Ideal for industrial, remote monitoring, and transportation applications.
Thor Broadcast F-GET-4ET-A/B 4-Port 10/100/1000 Mbps Gigabit Ethernet Transceiver over Single Fiber Features:
- Point-to-point bi-directional transmission over a single (simplex) fiber
- Zero-delay automatic forwarding
- Auto Speed negotiation
- Full Duplex
- Transmits 4 ports of 10/100/1000 Mbps Gigabit Ethernet (10BASE-T / 100BASE-TX / 1000BASE-T)
- 4 x RJ45 connectors (auto-negotiated, unmanaged switch)
- Supports single-mode, single-fiber via LC connectors (simplex)
- Transmission distance: 20km standard (40km, 80km, or 120km available depending on model)
- Hot-pluggable modules
- Available in chassis mount, wall-mount, or DIN-rail configurations
- 1500W surge protection and 15kV ESD protection
- External power supply
- Wide operating temperature range: -40°C to +70°C
- Input voltage: 9 ~ 48VDC
- Reverse polarity protection
- Compact form factor
Why not buy this Thor Broadcast F-GET-4ET-A/B 4-Port 10/100/1000 Mbps Gigabit Ethernet Transceiver over Single Fiber from HDTV Supply today?
Thor Broadcast F-GET-4ET-A/B 4-Port 10/100/1000 Mbps Gigabit Ethernet Transceiver over Single Fiber Specification:
| Category | Specification |
|---|---|
| Ethernet Ports | 4 x RJ45 ports (G1–G4) – 10/100/1000 Mbps Auto-Negotiated |
| Standards Supported | IEEE 802.3 – Ethernet base standard IEEE 802.3u – 100BASE-TX IEEE 802.3ab – 1000BASE-T IEEE 802.3x – Full Duplex & Flow Control IEEE 802.3az – Energy Efficient Ethernet (optional) |
| Auto-Negotiation | Supports auto detection of 10/100/1000 Mbps speeds and full/half duplex modes |
| Transport/Application Protocols | Pass-through support for: TCP, UDP, HTTP/HTTPS, FTP/TFTP/SFTP, DHCP, BOOTP, SNMP, NTP, DNS, Modbus TCP, BACnet/IP |
| Optical Interface | LC/PC Connector – Single Fiber (Simplex) |
| Transmission Distance | 20Km standard (40, 80, 120Km available per model variant) |
| Fiber Type | Single-mode, simplex (dual-fiber SFP version available upon request) |
| LED Indicators | PWR, Link/Activity LEDs for each port |
| Interface Protection | 1500W Surge Protection, 15KV ESD Protection |
| Operating Temperature | -30°C to +75°C |
| Humidity | 0–95% RH (non-condensing) |
| RoHS Compliant | Yes |
| Power Supply | 5V DC Input (external power supply included) |
| Power Consumption | ≤ 2.68W |
| AC Power Range (optional) | 85 ~ 220V AC input version available upon request |
| Dimensions | 4” x 5” x 1.25” |
Why not buy this Thor Broadcast F-GET-4ET-A/B 4-Port 10/100/1000 Mbps Gigabit Ethernet Transceiver over Single Fiber from HDTV Supply today?
Thor Broadcast F-GET-TRS-B 10/100/1000 Mbps 1 Fiber Media Converter
Thor Broadcast F-GET-TRS-A 10/100/1000 Mbps 1 Fiber Media Converter
Thor Broadcast F-GET-TR-SM 1000 Mbps Fiber Ethernet Media Converter SC
Thor Broadcast F-GET-TR-MM Gigabit Ethernet 1000Mbs to Fiber Converter
Thor Broadcast F-4SDI-3G-GET-TxRx 4-Ch SD/HD 3G-SDI with Gigabit Ethernet Over Single Fiber
What Is a WolfPack Fixed HDMI Matrix Switcher?
A WolfPack Fixed HDMI Matrix Switcher is a single-chassis device that routes any HDMI source — such as a cable box, satellite receiver, streaming player, or computer — to any TV or display in a building, simultaneously and independently. Unlike an HDMI splitter (which sends one source to many screens) or a simple HDMI switch (which selects one source for one screen), a matrix switcher lets you show a different channel on every TV at the same time. HDTV Supply has sold WolfPack fixed matrix switchers to sports bars, restaurants, hotels, churches, schools, and commercial AV integrators since 2000.
Fixed vs. Modular: Which Do You Need?
WolfPack comes in two families: Fixed and Modular. Fixed matrix switchers have a set number of inputs and outputs built into one box — for example, 4 inputs × 4 outputs (4×4) or 8 inputs × 8 outputs (8×8). They are plug-and-play, rack-mountable, and the right choice when your input/output count won't change. Modular matrix switchers use a chassis with swappable I/O cards, scaling from a few ports up to 80×80 or beyond. If you know exactly how many sources and screens you need today, a fixed unit is typically lower cost and simpler to deploy.
Available Fixed WolfPack Configurations
HDTV Supply offers WolfPack Fixed HDMI Matrix Switchers in the following sizes:
- 4×2 — 4 sources to 2 displays
- 4×4 — 4 sources to 4 displays
- 8×8 — 8 sources to 8 displays
- 8×9 — 8 sources to 9 displays
- 16×16 — 16 sources to 16 displays
- 16×32 via CAT6 — extends signal up to 450 feet over CAT6 cable
Select models include built-in video wall processing, multiview, and picture-in-picture (PIP) — allowing two or more sources to display on a single screen simultaneously.
Control Options for Fixed Matrix Switchers
Every WolfPack Fixed HDMI Matrix Switcher supports multiple control methods so you can integrate it into any environment:
- Front-panel buttons — manual source switching directly on the unit
- IR remote control — included with most models
- RS-232 serial control — for integration with Crestron, Control4, AMX, and similar systems
- TCP/IP (LAN) control — send hex commands over your network from any device
- Web GUI — browser-based interface for switching without additional software
- Free iOS and Android apps — available for select WolfPack models
For RS-232 hex command strings and TCP/IP control protocols, see our WolfPack HEX Code Reference and TCP/IP Control Guide.
Frequently Asked Questions
What is the difference between a fixed HDMI matrix switcher and a modular HDMI matrix switcher?
A fixed HDMI matrix switcher has a set number of HDMI inputs and outputs built into a single unit — for example, 8 inputs and 8 outputs. A modular matrix switcher uses a chassis with interchangeable I/O cards, so you can configure it for many different port counts and expand it later. Fixed units are simpler and more affordable; modular units offer flexibility for larger or changing installations.
Can a WolfPack fixed matrix switcher show different channels on different TVs at the same time?
Yes. A matrix switcher routes any input to any output independently. In an 8×8 configuration, all 8 displays can show 8 completely different sources simultaneously, or multiple displays can share the same source — in any combination you choose.
Can I control a WolfPack fixed matrix switcher from a Crestron or Control4 system?
Yes. WolfPack Fixed HDMI Matrix Switchers support RS-232 and TCP/IP control, which are standard integration protocols supported by Crestron, Control4, AMX, and other third-party control systems. HDTV Supply provides hex command strings and driver documentation to support custom integrations.
What resolution do WolfPack Fixed HDMI Matrix Switchers support?
Resolution support varies by model. WolfPack fixed matrix switchers are available in 1080p (Full HD) and 4K 30Hz configurations. Select 4K models also support HDR and HDCP 2.2. Always check the individual product specification sheet for confirmed resolution, color depth, and HDCP version.
How far can I run HDMI from a WolfPack fixed matrix switcher?
Standard HDMI outputs on fixed matrix switchers support runs up to approximately 25–50 feet depending on cable quality and resolution. The WolfPack 16×32 model transmits over CAT6 cabling for distances up to 450 feet per run. For longer distances with other fixed models, HDMI extenders can be added at each display.
What is the best HDMI matrix switcher for a sports bar?
For sports bars with up to 16 TVs, a WolfPack Fixed 16×16 HDMI Matrix Switcher is a popular choice — it handles 16 independent sources (cable boxes, satellite receivers, streaming devices) and routes any of them to any TV. For larger venues with 20–80+ TVs, HDTV Supply's WolfPack Modular Matrix Switchers or AV Over IP systems are typically the better fit. Call 833-WOLFPACK (833-965-3722) for a free consultation.
Need Help Choosing?
HDTV Supply has been helping AV integrators, sports bars, hotels, and homeowners select the right matrix switching system for 25 years. Call us at 833-WOLFPACK (833-965-3722) or email kent@hdtvsupply.com and we'll recommend the right unit for your source count, display count, resolution requirements, and control system.