This SurgeX EV-20830-L630 IC Diagnostic Power Conditioner w/Predictive Analysis Software - 30A/208V offers solutions to resolve power issues that can cause equipment error codes, malfunctions and downtime.
SurgeX EV-20830-L630 IC is an AC AC Diagnostic and Scope Meter Tool with Interface Cable & NEMA 6-30.
enVision provides visibility and control into the power conditions at a installation site by gathering and analyzing data to facilitate root cause discussions with affected end users. It interprets the data into key metrics and trends, and baselines the factors that influences equipment operation, damage conditions, and inefficiencies.
Using innovative algorithms and predictive analytics software, the enVision discovers anomalies, patterns, and gives solutions to resolve electrical problems. It attempts to identify issues that can lead to connected equipment failure in advance. This enables technicians to proactively remedy issues rather than reacting to disruption or downtime.
SurgeX EV-20830-L630 IC Diagnostic Power Conditioner w/Predictive Analysis Software - 30A/208V Features:
- Measures line and neutral to ground voltage, crest factor, power factor, and line frequency metrics
- 512 time stamped events with specific date and time
- Historical max./min./avg. data up to 138 days
- Customizable settings
- Identifies pre-existing power issues
- Internal battery
- Remote access with optional Remote Portal module
Why not buy this SurgeX EV-20830-L630 IC Diagnostic Power Conditioner w/Predictive Analysis Software - 30A/208V today?
SurgeX EV-20830-L630 IC Diagnostic Power Conditioner w/Predictive Analysis Software - 30A/208V Specifications:
- Load Rating: 30 Amps at 208-240 Volts
- Voltage Protection Rating (VPR): 500V All Modes
- Attenuation:
- Normal Mode: > 30 dB 80kHz – 50MHz
- Common Mode: > 30 dB 200 kHz – 50MHz
- Power Requirement (no load): 4 Watts
- Under-Voltage Shutdown: Adjustable from 0 V to 220 V. Default 160 V.
- Under-Voltage Record: Adjustable from 0 V to 220 V. Default 180 V.
- Under-Voltage Restore: Adjustable from 80 V to 220 V. Default 190 V.
- Over-Voltage Shutdown: Adjustable from 220 V to 300 V *. Default 280 V.
- Over-Voltage Record: Adjustable from 220 V to 300 V *. Default 270 V.
- Over-Voltage Restore: Adjustable from 220 V to 300 V *. Default 260 V.
- Internal Memory Capacity:
- 512 Power Quality Events with Timestamp
- 138 Day Electrical Parameter History at 30 minute intervals
- 2.25 Day Electrical Parameters at 10 second intervals
- Timestamp Accuracy: ± 1% Typical Product Accuracy
- Measurement Accuracy: 208-240V Models ± 2% Typical product accuracy
- Response Time:
- Over-Voltage 90 ms
- Under-Voltage 200 ms
- Power Outage Event: Definition AC Voltage has dropped below 20V
- Surge Event Definition: Filter has been exposed to a transient voltage in one of the 3 possible modes (between Live and Neutral, between Live and Ground, between Neutral and Ground) with a peak amplitude of 500V* or higher and a frequency of 20 kHz or higher. *500V surge voltage amplitude applies to IEEE C62.41 Category B Impulse; surge voltage amplitudes necessary for detection of other surge types may vary. *The allowed range was changed from 260-300V to 220-300V in firmware version 1.JB3, released in December 2016.
- Modem/Fax Protection: Single telephone line surge suppression
- Ethernet Protection: CAT6 network surge protection
- Dimensions (WxDxH): 7.75 x 4 x 11.25"
- Weight: 10Lbs
- Temperature Range: 41° to 95°F
- Humidity Range: 5 to 95% R.H. non-condensing
- Agency Listings:
- ETL Certified to UL 1449 3rd Edition
- ETL Certified to UL 1283 5th Edition
- ETL Certified to CSA 22.2 No. 8-M1986 (R2008)
Why not buy this SurgeX EV-20830-L630 IC Diagnostic Power Conditioner w/Predictive Analysis Software - 30A/208V today?
SurgeX EV-20830-L630 IC User Manual
SurgeX EV-20830-L630 IC Specifications
