QSC DPC-10 10-Foot DataPort Cable with HD15 Connectors
The QSC DPC-10 is a 10-foot DataPort cable designed for compatible QSC DataPort-equipped amplifiers and Q-SYS, QSControl, and QSC DSP system applications. It features HD15 male connectors on both ends for carrying audio, amplifier monitoring, and control signals over a dedicated DataPort connection.
Key Features
- 10-Foot DataPort Cable
- HD15 Male Connectors on Both Ends
- Q-SYS and QSControl Compatibility
- Audio, Monitoring, and Control Signals
QSC Certified Expertise
Knowledgeable Support for QSC Products
HDTV Supply has QSC Level 1 certified expertise. Our team has completed QSC Level 1 Training, demonstrating foundational knowledge of the QSC platform, including system design, hardware and software, programming, and troubleshooting.
This training helps us provide knowledgeable product guidance when customers are selecting and deploying Q-SYS solutions. When you purchase Q-SYS products from HDTV Supply, you are working with a team that understands the Q-SYS platform and can help you make informed product and system decisions.
Why not buy this QSC DPC-10 10-Foot DataPort Cable today?
Ask a Question
Have a question about the QSC DPC-10? Our product specialists are ready to help.
Specifications
| Model | DPC-10 |
| Product Type | DataPort Cable |
| Cable Length | 10 Feet (3.05 m) |
| Connectors | HD15 Male to HD15 Male |
| Connection Type | QSC DataPort |
| Compatible Systems | Q-SYS, QSControl, and QSC DSP Systems |
| Compatible Equipment | QSC DataPort-Equipped Power Amplifiers and Compatible Processors |
| Application | Audio, Amplifier Monitoring, Control, and System Connectivity |
| Manufacturer Part Number | DPC-10 |
| Estimated Shipping Weight | Approx. 0.5 lbs |
Manuals
What is the QSC DPC-10?
A: The QSC DPC-10 is a 10-foot DataPort cable with HD15 male connectors on both ends for connecting compatible QSC DataPort equipment.
How long is the QSC DPC-10 cable?
A: The DPC-10 is 10 feet long, or approximately 3.05 meters.
What connectors does the DPC-10 use?
A: The DPC-10 uses HD15 male connectors on both ends.
What is a QSC DataPort cable used for?
A: A QSC DataPort cable connects compatible DataPort-equipped amplifiers with QSC processing equipment for audio, amplifier monitoring, and control functions.
Can the DPC-10 connect a QSC amplifier to a Q-SYS system?
A: Yes. The DPC-10 is designed for compatible QSC DataPort amplifier connections in Q-SYS and other supported QSC system applications.
Can the DPC-10 be used with QSControl systems?
A: Yes. QSC DataPort cables are used in Q-SYS, QSControl, and QSC DSP system applications requiring compatible amplifier connectivity.
Is the DPC-10 the same as a standard VGA cable?
A: No. Although the connectors may look similar, QSC DataPort cables have specific conductor and shielding requirements.
Can I use a regular VGA cable instead of the DPC-10?
A: QSC recommends using QSC DataPort cables because the DataPort specification requires all 15 connections to be present and proper shielding for the audio conductor pairs.
Does the DPC-10 carry audio signals?
A: Yes. QSC DataPort connections can carry audio signals along with amplifier monitoring and control information over the same cable.
What is the warranty on the QSC DPC-10?
A: The DPC-10 is a QSC accessory and is covered according to QSC's applicable limited warranty terms.
What cable should I use to connect a QSC DataPort amplifier?
A: Use a QSC DataPort cable such as the DPC-10 when a 10-foot connection is appropriate for the installation.
How do I connect a QSC DataPort amplifier to a processor?
A: Connect each HD15 male end of the DataPort cable to the corresponding DataPort on the compatible processor and amplifier, then finger-tighten the connector retaining screws.
What is the difference between QSC DPC-2, DPC-4, DPC-6, and DPC-10?
A: The primary difference is cable length. The DPC-2 is 2 feet, DPC-4 is 4 feet, DPC-6 is 6 feet, and DPC-10 is 10 feet.
Can the QSC DPC-10 be used for amplifier monitoring and control?
A: Yes. QSC DataPort connections can carry amplifier monitoring and control information in addition to audio signals when supported by the connected equipment.
Why should I buy the QSC DPC-10 instead of a generic VGA cable?
A: The DPC-10 is specifically designed for QSC DataPort requirements, including the required conductors and shielding needed for DataPort audio, monitoring, and control functions.
Why not buy this QSC DPC-10 10-Foot DataPort Cable today?
Warranty
The QSC DPC-10 is a QSC accessory and is covered according to QSC's applicable limited warranty terms. Refer to the current QSC warranty documentation for the specific coverage period and conditions.
Reviews
QSC® Catalog
See every QSC® and Q-SYS® product we carry, with specs, videos, Q&A and pricing, all in one catalog. Sold by HDTV Supply.
