The QSC DCIO-H Digital Cinema Input/Output for Q-SYS is a cinema-specific interface that provides audio input and output connectivity for each screen in a Q-SYS-enabled cinema complex.
Working with Q-SYS Cores, DPA-Q amplifiers, and DCS loudspeakers, the DCIO-H provides a cost-effective, integrated approach to cinema audio system design powered by the Q-SYS OS.
Using Q-SYS Designer, custom user control interfaces (UCIs), touchpanels, and mobile apps, users can configure, control, and monitor theatre audio equipment through a unified system interface.
QSC DCIO-H Features
- Provides cinema-specific digital audio input and output for Q-SYS-enabled cinemas and multiplexes.
- Routes audio from projector Integrated Media Blocks (IMBs) and alternate content sources to a Q-SYS Core over Q-LAN.
- Includes a microphone/line input and a stereo line input for audio sources.
- Provides a line-level monitor output and a powered monitor output for a passive speaker.
- Includes HDMI input and output for non-sync sources on the DCIO-H model.
- Supports Dolby Audio, including Dolby Digital Plus and Dolby Surround 7.1, and DTS-HD decoding on the DCIO-H model.
- Provides four relay control outputs for automation.
- Includes hearing-impaired (HI) and visually impaired (VI) audio outputs.
- Supports theatre automation through RS-232 and general-purpose inputs (GPI).
- Integrates with Q-SYS Designer for centralized configuration, control, and monitoring.
QSC Certified Expertise
Knowledgeable Support for QSC Products
HDTV Supply has QSC Level 1 certified expertise. Our team has completed QSC Level 1 Training, demonstrating foundational knowledge of the QSC platform, including system design, hardware and software, programming, and troubleshooting.
This training helps us provide knowledgeable product guidance when customers are selecting and deploying Q-SYS solutions. When you purchase Q-SYS products from HDTV Supply, you are working with a team that understands the Q-SYS platform and can help you make informed product and system decisions.
Bring your cinema audio system together with the QSC DCIO-H Digital Cinema Input/Output for Q-SYS. Contact HDTV Supply for product guidance and compatibility assistance.
Ask a Question
Need help with the QSC DCIO-H Digital Cinema Input/Output for Q-SYS? Contact our team for product information, compatibility questions, or purchasing assistance.
Phone: 833-WOLFPACK (833-965-3722)
Website: HDTV Supply
QSC DCIO-H Specifications
| Specification | DCIO / DCIO-H |
|---|---|
| General | |
| Dimensions (H × W × D) | 1.75 × 19 × 11.2 inches (44 × 483 × 282.5 mm) |
| Line Voltage Requirements | 100–240 VAC, 50/60 Hz |
| Included Accessories | 1 m UL/CSA line cord and Euro-style connectors for outputs and relay connections |
| Front Panel Controls and Indicators | |
| Parameter Adjustment | Rotary encoder |
| Power Indicator | Blue LED |
| Display | Monochrome 304 × 96 blue OLED graphics display |
| Other Controls | Momentary mute button, red mute LED, screen navigation (Next) button, and ID button |
| Rear Panel Connectors | |
| Mic/Line Input | XLR; microphone input with phantom power or line-level input |
| Stereo Line Input | 3.5 mm unbalanced TRS |
| HI/VI Output | One 5-pin Euro-style connector with common ground |
| Monitor Line/Speaker Outputs | Line: 3-pin Euro-style; speaker: 2-pin Euro-style; 10 W maximum speaker output |
| Audio Performance | |
| A/D Conversion | 32-bit delta-sigma, 48 kHz |
| Frequency Response | 20 Hz–20 kHz (±0.5 dB) |
| Stereo Line Inputs | |
| Connector | 3.5 mm TRS mini jack |
| Input Stage Type | Unbalanced input |
| Input Impedance (4 dBu Sensitivity) | Greater than 10 kΩ |
| Maximum Analog Input Level (4 dBu Sensitivity) | 15 dBu (4.4 Vrms) |
| Input Impedance (-10 dBV Sensitivity) | 2.7 kΩ |
| Maximum Analog Input Level (-10 dBV Sensitivity) | 1 dBV (1.2 Vrms) |
| Relay and Automation | |
| Relay Outputs | Four 3-pin Euro-style connectors; normally open (NO), normally closed (NC), and common; maximum 30 VDC at 1 A |
| Automation GPI | RJ45, six GPI; maximum input voltage 5 V (3.3 V typical); TTL-compatible dry contact closure |
| Automation Interface | RJ45 and RS-232 |
| Digital Audio and Network | |
| AES3/EBU Inputs | Channels 1–8 and 15–16; two RJ45 connectors |
| AES/EBU Input Stage | Balanced input |
| AES/EBU Input Impedance | 110 Ω |
| AES/EBU Input Sample Rate | 48 kHz or 96 kHz |
| Q-LAN Ethernet Ports | Two Gigabit Ethernet RJ45 ports (LAN A and LAN B) |
| HDMI and Power | |
| HDMI Input/Output | HDMI 2.0, Type A female connectors; DCIO-H only |
| Power Switch | Rocker switch |
| Power Connector | IEC power connector |
| Mic/Line Input | |
| Input Stage Type | Active balanced input |
| Input Impedance | 2.2 kΩ |
| Maximum Analog Input Level | 26 dBu |
| Phantom Power Voltage | 15 V |
QSC DCIO-H Frequently Asked Questions
The QSC DCIO-H is a cinema-specific input/output interface designed to connect cinema audio sources and monitoring or assistive-listening outputs within a Q-SYS system.
The DCIO-H adds HDMI input/output for non-sync sources and supported Dolby Audio and DTS-HD decoding features. Confirm the exact feature set for the model being purchased.
Yes. It is designed to integrate with a compatible Q-SYS system and communicate with a Q-SYS Core over the Q-LAN network.
Supported connections include AES3/EBU digital audio, a microphone/line input, a stereo line input, and HDMI on the DCIO-H model. Verify source formats and system configuration before installation.
Yes. The DCIO-H version includes HDMI 2.0 Type A input and output connectors for supported non-sync sources.
The supplied product information lists Dolby Audio features, including Dolby Digital Plus and Dolby Surround 7.1, as well as DTS-HD decoding for the DCIO-H. Check the manufacturer's documentation for supported formats and licensing details.
Yes. The listed connections include a line-level monitor output and a powered speaker output rated at up to 10 W for a passive monitor speaker.
Yes. The unit includes HI and VI audio outputs for supported cinema assistive-listening applications.
Yes. The listed automation interfaces include RS-232, GPI inputs, and four relay outputs. Confirm wiring and control requirements with the system designer.
The supplied specifications list a 1 RU chassis measuring approximately 1.75 inches high, 19 inches wide, and 11.2 inches deep.
The DCIO-H connects supported cinema audio sources and output devices to a Q-SYS system, with audio routing and system control configured through compatible Q-SYS components and software.
The listed network connections are two Gigabit Ethernet RJ45 ports for Q-LAN. Network configuration should follow the requirements of the complete Q-SYS system.
The supplied specifications state a line-voltage range of 100–240 VAC at 50/60 Hz. Check the product documentation and local electrical requirements before installation.
Use the User Manual and Specification Sheet links in the Manuals tab on this product page.
Confirm the required audio formats, source connections, automation interfaces, and compatibility with your Q-SYS Core and cinema equipment. Contact HDTV Supply for assistance before ordering.
QSC DCIO-H Warranty
Warranty coverage and terms may vary by product and purchase conditions. Please contact HDTV Supply or consult QSC's current official warranty documentation to confirm the applicable coverage for the QSC DCIO-H Digital Cinema Input/Output for Q-SYS.
Customer Reviews
Customer reviews and ratings will appear here when available. If you have purchased the QSC DCIO-H Digital Cinema Input/Output for Q-SYS, please share your experience to help other customers make an informed decision.
