NTI SM-32X32-DVI-LCD-5V16A DVI Video Matrix Switch

NTI

$6,720.00

5% Discount. Apply Code 5percentOff at Checkout!

Part Number:
SM-32X32-DVI-LCD-5V16A
UPC:
796168575152
Availability:
Usually ships the same business day
1:
Configure and control the switch through Ethernet, serial port, front panel buttons, or IR remote
2:
Supports DVI-D interface for crisp and clear video quality on flat panel displays
3:
EDID learning for the support of any DVI display device
4:
Free 15-Day Trial (See below FAQ)
5:
Free Shipping

NTI SM-32X32-DVI-LCD-5V16A DVI Video Matrix Switch

NTI SM-32X32-DVI-LCD-5V16A DVI Video Matrix Switch routes video from up to 32 single link digital DVI video sources (computers, DVD players, satellite receivers, etc.) to up to 32 displays (LCD monitors, Plasma screens, DLP HDTVs, projectors, etc.).

NTI SM-32X32-DVI-LCD DVI Video Matrix Switch up to 32x32 Features:

  • Configure and control the switch through Ethernet, serial port, front panel buttons, or IR remote.
  • Supports DVI-D interface for crisp and clear video quality on flat panel displays.
  • Supports HDTV resolutions up to 1080p and computer resolutions up to 1920x1200 (WUXGA).
  • Passes HDMI audio and video signal through DVI-I port.
    • Transmit audio and video over a single cable with the DVI-HD-xx-MM male DVI-D to male HDMI cable.
  • Meets the electrostatic discharge (ESD) immunity requirements of IEC/EN 61000-4-2.
  • Each output provides one video signal and one stereo audio signal (with audio option).
  • Each input can be independently connected to any or all outputs.
    • HDCP is supported when connecting any one input to any one output (4x4 and 8x8 models only).
    • HDCP is not supported when connecting one input to multiple outputs.
  • EDID learning for the support of any DVI display device.
  • Built-in default EDID configuration tables for both PC and MAC.
    • Dual default EDID configuration tables: high resolution without audio and TV resolution with audio.
  • Optional 32x32 DVI Matrix Switch with internal 5V power supplies drives all connected ST-2FODVI-LC extenders on the output side.
    • Connect up to 32 ST-2FODVI-LC extenders to the matrix switch to extend a DVI signal up to 4,920 feet away.
      • Local extender unit is powered by the matrix switch - no power supply required.

Why not buy this NTI SM-32X32-DVI-LCD-5V16A DVI Video Matrix Switch today?

NTI SM-32X32-DVI-LCD-5V16A DVI Video Matrix Switch Specification:

Video Input
      • Female DVI-I connectors.
      • Signal type: single link digital DVI.
      • Compatible with computers and HDTV video sources (satellite receivers, DVD players, etc) with DVI video.
      • Multiplatform support: Windows 2000/XP/Vista/7/8/10, Windows Server 2000/2003/2008/2012, Solaris, Linux, FreeBSD, and MAC OS 9/10.
Video Output
      • Female DVI-I connectors.
      • Signal type: single link digital DVI.
      • Supports HDTV resolutions to 1080p and computer resolutions to 1920x1200 (WUXGA).
      • Video bandwidth: 1.65 Gbps
Protocols
      • HTTP, HTTPS
      • TCP/IP, DHCP, UDP, ARP
      • IPV4
Power
      • 100 to 240 VAC at 50 or 60 Hz via IEC connector. (Country-specific power supply cable included.)
        • SM-32X32-DVI-LCD-5V16A: includes internal power supplies at the output side that will power any connected ST-2FODVI-LC local units.
      • Max heat dissipation:
        • SM-8X8-DVI-LCD: 16W
Power Consumption
NTI Part # Watts
SM-4X4-DVI-LCD 10
SM-8X8-DVI-LCD 20
SM-16X16-DVI-LCD 25
SM-32X32-DVI-LCD 45

Environmental
      • Operating temperature: 32 to 104˚F (0 to 40˚C).
      • Storage temperature: -20 to 140˚F (-30 to 60˚C).
      • Operating and Storage Relative Humidity: 17 to 90% non-condensing RH.
Dimensions
      • SM-4X4-DVI-LCD WxDxH (in):
        • 16.19x10.00x1.75 (without supplied rackmount kit)
        • 19x10.00x1.75 (with supplied rackmount kit)
      • SM-8X8-DVI-LCD WxDxH (in):
        • 17.40x10.00x1.75 (without supplied rackmount kit)
        • 19x10.00x1.75 (with supplied rackmount kit)
      • SM-16X16-DVI-LCD WxDxH (in): 19x16.17x3.5
      • SM-32X32-DVI-LCD WxDxH (in): 19x16.17x7
      • SM-32X32-DVI-LCD-5V16A WxDxH (in): 19x21.17x7
Cables
      • Interface cables between the video sources/displays and the switch are required for proper operation.
        • Note: DVI and HDMI cables longer than 15 feet may provide poor video performance with this switch depending on the cable quality and display quality. The switch supports cable lengths up to 75 feet on the output side.
      • Use DVI-IS-xx-MM or DVI-HD-xx-MM cables to connect a DVI or HDMI source or display up to 15 feet away from the switch.
      • Use HD-xx-MM HDMI cables with HDMIF-DVIDM adapters to connect an HDMI display up to 75 feet away from the switch.
      • Cables not included.

MTBF
NTI Part # Hours
SM-4X4-DVI-LCD 74,502
SM-8X8-DVI-LCD 90,801
SM-16X16-DVI-LCD 48,326
SM-32X32-DVI-LCD 35,727
Regulatory Approvals
      • CE, RoHS
      • TAA compliant
Warranty
      • Two years
Compatible NTI Products
    • Combine NTI's extenders, switches, splitters and cables for complex applications
      • HDMI Quad Screen Splitter/Multiviwer
        (SPLITMUX-HD-4RT)
      • DVI-I Single Link Interface Cable (DVI-IS-xx-MM)
      • DVI-D to HDMI Single Link Interface Cable (DVI-HD-xx-MM)
        • Embedded audio will pass through the switch (with or without optional stereo audio) when an HDMI source is connected using DVI-HD-xx-MM.
      • Low-Cost Mini HDMI Extender via One CAT6/6a/7 (ST-1C6-MINI-ULC)
      • DVI Extender via Fiber Optic Cable (ST-2FODVI-LC)
        • Embedded audio will pass through the switch and extender if an HDMI source is connected using an HDMI to DVI adapter.
      • DVI Video Splitter(VOPEX-DVI-x)
      • DVI/VGA Quad Screen Multiviewer(SPLITMUX-DVI-4)
      • Screen Splitter / Video Wall Processor(SPLITMUX-SVDVI-4)
      • HDMI HDBase-T Extender via One CAT5e/6(ST-C6HD-HDBT)
      • Mini HDMI Extender via Two CAT5e/6/6a
        (ST-C5HD-MINI-ULC)
        • Only compatible for DVI input extensions with the DVI Matrix Switch.