NTI HD4K18GB-FO-20M-MM 20 Meters 4K HDMI Active Optical Cable
NTI HD4K18GB-FO-20M-MM 20 Meters 4K HDMI Active Optical Cable locates an Ultra-HD 4Kx2K 60Hz 4:4:4 HDMI display up to 100 meters (328 feet) from a video source. Using optical fiber, the HD4K18GB-FO-xxM-MM provides high reliability HDMI signal transmission with zero signal loss in high noise environments.
NTI HD4K18GB-FO-20M-MM 20 Meters 4K HDMI Active Optical Cable Features:
High speed and long distance transmission by optical system up to 100 meters (328 feet).
Hybrid cable containing both fiber optic and copper cores.
Supports Ultra-HD 4Kx2K resolutions to 4096x2160 (60Hz), 2K resolution 2048x1080, HDTV resolutions to 1080p, and computer resolutions to 1920x1200.
No loss of signal - delivering crystal clear digital images instantly.
HDCP 2.2 compliant.
No external power required.
HDMI features supported:
Dolby TrueHD, DTS-HD Master Audio, Dolby Digital, and DTS
Bandwidth: 6Gbps per channel (18Gbps total)
Supports ARC, HEC and CEC.
Optical fibers immune to signal noise.
Low RFI/EMI for sensitive applications.
Supports Plug-n-Play specification.
EDID learning for the support of any HDMI display device.
Thin and ultra-lightweight construction.
Ideal solution for many applications, including:
Medical Imaging Equipment
Airplane On-board Video System
TV Broadcast Station
Conference Room Video Equipment
Why not buy this NTI HD4K18GB-FO-20M-MM 20 Meters 4K HDMI Active Optical Cable today?
NTI HD4K18GB-FO-20M-MM 20 Meters 4K HDMI Active Optical Cable Specification:
Connectors: Male HDMI Type A connectors.
Resolutions: supports resolutions up to Ultra-HD 4Kx2K 4:4:4 (4096x2160@60Hz).
Supports HDCP 2.2/1.4
Frame rate: 60fps
Video bandwidth: 6Gbps per channel (18Gbps total)
Cable Thickness: 4.5mm (0.177 in)
Bend radius: up to 48mm (1.89 in)
Cable construction: 4 fiber cores and 7 copper conductors
Cable jacket: PVC
Available lengths: 10/15/20/25/30/50/70/100 meters
+5V passive power, supplied through pin 18 on the HDMI connection from the source device.
The +5V connection, as well as powering the internal fiber optic module, is carried through to the other sink via a full standard copper connection.
Source device must be capable of delivering more than 500mA.
Operating temperature: 14 to 122˚F (-10 to 50˚C)
Storage temperature: -4 to 140˚F (-20 to 60˚C).
Operating and storage humidity: 10% to 80% non-condensing RH.