NTI E-LDS400-5 Legacy Liquid Detection Rope Sensor Cable 400ft 2-Wire Cable 5ft

NTI

$4,134.00

5% Discount. Apply Code 5percentOff at Checkout!

Part Number:
E-LDS400-5
Availability:
Usually ships the same day
1:
Supports CAT5/5e/6 cable up to 1,000 ft.
2:
100% Waterproof Electronics
3:
Available 2-wire cable (y) lengths
4:
Free 15-Day Trial (See below FAQ)
5:
Free Shipping
6:
2-Year NTI Warranty
NTI E-LDS400-5 Legacy Liquid Detection Rope Sensor - Length of water sensor cable - 400 ft. Length of 2-wire cable - 5 ft.

This NTI E-LDS400-5 Legacy Liquid Detection Rope Sensor - Length of water sensor cable - 400 ft. Length of 2-wire cable - 5 ft. are available for simple connection to either the "Digital In" terminals (use model E-LD or E-LD-LC) or the "RJ45 Sensor" ports (use model E-LDS).

Connect the two-wire cable (up to 1000 feet long) from a liquid detection sensor (E-LD shown in Figure 2-upper image) to a set of "DIGITAL IN" contacts. For added range (up to 1000 more feet), use an E-LDS (shown in Figure 2-lower image) and connect to an "RJ45 Sensor" port.

The twisted orange sensing cable should be placed flat on the surface (usually the floor) where liquid detection is desired. If tape is required to hold the sensor in place, be sure to only apply tape to the ends, exposing as much of the sensor as possible. At least 5/8" of the sensor must be exposed for it to function.

NTI E-LDS400-5 Legacy Liquid Detection Rope Sensor - Length of water sensor cable - 400 ft. Length of 2-wire cable - 5 ft. Features:

  • For detecting water presence and warning of flooding.
  • Detects liquid depth >0.1" (2.5 mm).
  • Minimum puddle: 0.6" (15 mm) diameter.
  • 100% waterproof electronics.
  • Detects any liquid or moisture, except deionized water.
  • Features a non-conductive polymer mesh that prevents false alarms caused by dirt/dust buildup, metal contact, or pressure on the rope

Why not buy this NTI E-LDS400-5 Legacy Liquid Detection Rope Sensor - Length of water sensor cable - 400 ft. Length of 2-wire cable - 5 ft. today?

NTI E-LDS400-5 Legacy Liquid Detection Rope Sensor - Length of water sensor cable - 400 ft. Length of 2-wire cable - 5 ft. Specifications:

  • Voltage and current:
    • Open Circuit: 5VDC max @ 1µA.
    • Closed circuit: <300mV @ 10.7mA.
  • RJ45 connector.
  • Voltage Supply: 12VDC
  • Current Consumption: 20mA
  • Supports CAT5/5e/6 cable up to 1,000 ft. (305 m)
  • Available water sensor cable (x) lengths: 1/10/50/100/200/400/600/800/1000 feet.
    • Bend radius: 0.375" (9.53 mm)
  • Plenum rating: CL2P (UL)
  • Available 2-wire cable (y) lengths: 5/10/20/50/100 feet.
    • Contact an NTI product consultant for cable lengths over 100 feet (30 meters) - supports up to 1,000 feet (305 meters).
  • Powered by E-SEMS-16U and SERIMUX-S-x.
  • Regulatory approvals: CE, RoHS
  • Requires the E-SEMS-16U and SERIMUX-S-x to operate.
  • Use self-adhesive clips (E-CLPxx-LD) to prevent sensor rope cable from shifing after installation

Why not buy this NTI E-LDS400-5 Legacy Liquid Detection Rope Sensor - Length of water sensor cable - 400 ft. Length of 2-wire cable - 5 ft. today?

E-LDS400-5 User Manual

Why not buy this NTI E-LDS400-5 Legacy Liquid Detection Rope Sensor - Length of water sensor cable - 400 ft. Length of 2-wire cable - 5 ft. today?

Frequently Asked Questions
Reasons To Buy an NTI Product