NTI E-IPCAM-HNPO-P Ultra-HD Wired Day/Night Outdoor Bullet IP Camera with Power over Ethernet (POE) Features:

View the camera from the ENVIROMUX web interface, camera web interface, included software, or with a compatible cell phone.
With the E-2D/5D/16D, a triggered snapshot can be forwarded in alert emails or stored locally on a connected flash drive.
- A snapshot can be triggered by any programmed event (motion detection, door open/close, glass break, smoke, liquid detection, etc.)

ONVIF authentication must be disabled on the camera.

IR night vision supported up to 98.4 feet (30 m).

1/2.7" 5-Megapixel Progressive Scan CMOS sensor.

Video Compression: H.265, H.264
Max resolution and frame rate:
- Main stream: 2592x1944 up to 20 fps, 2688x1520 up to 30 fps
- Sub stream: 704x576 up to 25 fps, 704x480 up to 30 fps
Lens: 2.8 mm (0.11 in).
Viewing Angle: 103°
System compatibility: ONVIF
Built-in motion detection.
- Auto-patrol preset positions: 4.
- Camera sends snapshots via email when motion is detected.
10/100 Mbps Ethernet port for wired connections.
Power:
- Input: 100 to 240 VAC at 50 or 60 Hz
- Output: 12 VDC, 1A external power adapter (included)
- Max consumption: 5.6 W
- Power over Ethernet standards supported: IEEE 802.3af
Operating and storage temperature: -40 to 140°F (-40 to 60°C).
Dimensions WxDxH: 2.76x6.54x2.76 in (70x166x70 mm).
Waterproof rating: IP67
Compatible with the E-2D/5D/16D.
Mounting hardware included.
Regulatory approvals: CE, FCC, RoHS