This Kramer VP-427X2 4K ProScale Receiver/Scaler with HDBaseT and HDMI Inputs is a high−performance auto−switcher/scaler receiver with 2 HDBaseT inputs and a local HDMI input for 4K HDMI™ over extended−reach HDBaseT. It supports automatic and manual glitch−free switching between the 3 inputs, and up− or down−scaling to any resolution up to 4K@60Hz (4:4:4). The output scaling automatically matches the resolution of the HDMI display on the output, or it can be manually set by the user. VP−427X2 enables extending video signals up to 180m over CAT copper cables at up to 4K@60Hz (4:2:0) 24bpp video resolution and provides even further reach for lower HD video resolutions

Kramer VP-427X2 4K ProScale Receiver/Scaler with HDBaseT and HDMI Inputs Features:

Comprehensive Receiver/Scaler — Scales signals of all standard resolutions up to 4K@60Hz (4:4:4) for routing to the HDMI output. Constant output sync prevents signal disruption when switching between inputs and when no video is detected.
HDMI Signal Extension — HDCP 1.4 / 2.2. 4K60, CEC, xvYCC color (on input).
Audio De–embedding — Analog balanced stereo output for de–embedding the audio to speakers.
Data Tunneling — Extend RS–232, IR, and Ethernet over the HDBaseT line.
Built–in Automated Control — Includes relay outputs and easy connection to occupancy sensors and contact closure switches.
CEC Support — Supports passing of CEC from input to output. Automatically sends CEC commands to shut down the output display after a timeout period when no input signal is found and to power up the display when the input returns.
Cost–Effective and Convenient Control Options — Ethernet and RS–232 serial ports, and local control via front panel input selection and OSD menu buttons.
ProcAmp Control — Contrast, brightness, color, etc.
Convenient Unit Control and Configuration Options — Local control via front panel source switching buttons and OSD menu. Distance control via RS–232 serial commands transmitted by a PC, touch screen system or other serial controller and relay switches.
Easy, Cost–effective Maintenance — Local firmware upgrade via USB connector.
Easy and Elegant Installation — Compact MegaTOOLS™ fan–less enclosure for dropped–ceiling mounting, or side–by–side mounting of 2 units in a 1U rack space with the recommended rack adapter

Why not buy this Kramer VP-427X2 4K ProScale Receiver/Scaler with HDBaseT and HDMI Inputs today?

Kramer VP-427X2 4K ProScale Receiver/Scaler with HDBaseT and HDMI Inputs Specifications:

INPUTS

2 HDBaseT: On an RJ–45 connector
1 HDMI: On a female HDMI connector

OUTPUTS

1 HDMI: On a female HDMI connector
1 Balanced Analog Stereo Audio: On a 5–pin terminal block

PORTS

1 IR: On a 3.5mm mini jack
1 RS–232: On a 3–pin terminal block
1 Ethernet: On an RJ–45 connector

VIDEO

Output Resolutions: 640x480@60Hz, 800x600@60Hz, 1024x768@60Hz, 1280x768@60Hz, 1280x800@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1200@60Hz RB, 2560x1600@60Hz RB, 1920x1080@60Hz, 1280x720@60Hz, 2048x1080@50/60Hz, 2560x1440@60Hz RB, 720x480p@60Hz, 720x576p@50Hz, 1280x720p@50/60Hz, 1920x1080p@24/25/30/50/60Hz, 2560x1080p@50/60Hz, 2K@24/25/30/50/60Hz, 4K@24/25/30/50/60Hz
Max. Range: 180m at 1080p@60Hz, 100m (328ft) at 4K@60Hz (4:2:0)
Latency: Up to 2 frames
Content Protection: HDCP 2.2/1.4
Switching Time Between Inputs: <2.5 seconds

USER INTERFACE

Control: Input selection buttons, remote contact–closure switches, relay switches. Kramer API via RS–232 serial commands transmitted by a PC, touch screen system or other serial controller, embedded web pages via LAN for configuration and control
Indicators: Power, link, input selection LEDs

POWER