Kramer SID-X1N DisplayPort, HDMI, VGA & DVI Auto Switcher over DGKat
This Kramer SID-X1N 4–Input Multi–Format Video over DGKat Transmitter & Step In Commander is a DGKat™ twisted pair transmitter and commander for computer graphics video, HDMI, DVI, DisplayPort and unbalanced stereo audio signals. The unit includes that allows the local source to be routed as the active source on the main display through the main switcher.
Kramer SID-X1N DisplayPort, HDMI, VGA & DVI Auto Switcher over DGKat Features:
Max. Data Rate – 4.95Gbps (1.65Gbps per graphics channel).
Compatible Switcher – VP–81SIDN.
HDCP Compliant. – Works with sources that support HDCP repeater mode.
HDMI Support – x.v.Color™ and 3D.
I–EDIDPro™ Kramer Intelligent EDID Processing™ – Intelligent EDID handling & processing algorithm ensures Plug and Play operation for HDMI systems.
Data Equalization and Reclocking.
Input Signal Detection – Based on video clock presence.
Automatic Input Selection – Based on manual selection or last connected input.
Automatic Analog Audio Detection and Embedding.
Local Balanced Audio De–embedding.
Support for Digital Audio Formats.
DGKat™ Signal Integration – Kramer technology for converting TMDS as well as control and communication to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat™ cables designed specifically for optimum performance.
Cable – Requires STP (shielded twisted pair) cable. For optimum range and performance, use Kramer's BC–DGKat623 or BC–DGKat7a23 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non–Kramer CAT 6 and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
Power Connect™ System – A single connection to the transmitter powers both units when the devices are within 150ft (50m) of each other.
Local Step–In Switching – Button & contact closure.
Power Supply – Requires independent power supply.
Why not buy this Kramer SID-X1N DisplayPort, HDMI, VGA & DVI Auto Switcher over DGKat today?
Kramer SID-X1N DisplayPort, HDMI, VGA & DVI Auto Switcher over DGKat Specifications:
1 HDMI on an HDMI connector, 1 DP on a DisplayPort connector, 1 DVI–D on a DVI–I connector
1 VGA on a 15–pin HD (F) connector, 1 unbalanced stereo audio on a 3.5mm mini jack
OUTPUTS: 1 twisted pair on an RJ–45, 1 unbalanced stereo audio in a 3.5mm mini jack
PORTS: 1 RS–232 3–pin terminal block for programming