Kramer DTAXR-OUT4-F32 4 Output 4K HDMI/Analog Audio over HDBaseT Card

Kramer

Price: $3,690.00
Today's Price: $2,952.00

10% Discount. Apply Code 10percentOff at Checkout!

Part Number:
DTAXR-OUT4-F32/STANDALONE
UPC:
7291063085483
Availability:
Usually ships the same day
1:
4K@60Hz (4:2:0) Resolution
2:
HDTV Compatible, HDCP Compliant
3:
Bidirectional Infrared Extension
4:
Bidirectional RS-232 Extension
5:
Free Shipping
10:
7-Year Kramer Warranty

Kramer DTAXR-OUT4-F32 4 Output 4K HDMI + Analog Audio over HDBaseT Card (F 32) is an advanced, dual stream transceiver for streaming 4K@60Hz (4:4:4) video signals via Ethernet over copper cable. KDS−10 can be set as either an encoder or decoder. As an encoder, it encodes and streams one or two HDMI inputs over an IP network. As a decoder, it receives the encoded signal, decodes it and outputs it to an HDMI output.

Kramer DTAXR-OUT4-F32 4 Output 4K HDMI + Analog Audio over HDBaseT Card (F 32) Features:

  • Max. Data Rate — 10.2Gbps (3.4Gbps per graphics channel).
  • Max. Resolution — 4K@60Hz (4:2:0).
  • Analog Audio Embedding/De–embedding — On the same jack.
  • HDBaseT Technology — HDTV compatible, HDCP compliant.
  • System Range — Up to 100m at normal mode (4K), up to 130m (430ft) at normal mode (2K), up to 180m (590ft) ultra mode (1080p @60Hz @24bpp). Note: When using Kramer HDBaseT cables.
  • Ethernet Extension — Ethernet interface data flows in both directions, allowing extension of up to 100Mbps Ethernet connectivity for LAN communication and device control.
  • Bidirectional RS–232 Extension — Serial interface data flows in both directions, allowing data transmission and device control.
  • Bidirectional Infrared Extension — IR interface data flows in both directions, allowing remote control of peripheral devices located at either end of the extended line.
  • 3D Pass–Through.

Why not buy this Kramer DTAXR-OUT4-F32 4 Output 4K HDMI + Analog Audio over HDBaseT Card (F 32) today?

Kramer DTAXR-OUT4-F32 4 Output 4K HDMI + Analog Audio over HDBaseT Card (F 32) Specifications:

  • OUTPUTS
    • 4 HDBaseT TP on RJ–45 connectors
    • 4 Balanced audio on terminal block connectors
  • PORTS
    • 4 RS–232 and 4 IR on 10 pin terminal blocks for bidirectional RS–232 and IR extension
    • 1 Ethernet on an RJ–45 connector for bidirectional Ethernet extension
  • BANDWIDTH PER CHANNEL
    • Video: 3.4Gbps
    • Serial Data: 115200
  • TOTAL BANDWIDTH
    • Video: 10.2Gbps
    • Serial Data: 115200
  • MAXIMUM RANGE
    • Up to 100m at normal mode (4K), up to 130m (430ft) at normal mode (2K), up to 180m (590ft) ultra mode (1080p @60Hz @24bpp)
    • Note: When using Kramer HDBaseT cables
  • 3D PASS THROUGH: Supported
  • EXTENDED ETHERNET: Up to 100Mbps extended line rate bandwidth
  • EXTENDED RS-232: 300 to 115200 baud rate
  • POWER CONSUMPTION: 26W
  • OPERATING TEMPERATURE: 0° to +40°C (32° to 104°F)
  • STORAGE TEMPERATURE: –40° to +70°C (–40° to 158°F)
  • HUMIDITY: 10% to 90%, RHL non–condensing
  • STANDARD COMPLIANCE: HDCP 1.4, HDMI 1.3a, HDBaseT
  • SAFETY REGULATORY COMPLIANCE: CE
  • ENVIRONMENTAL REGULATORY COMPLIANCE: Complies with appropriate requirements of RoHs and WEEE
  • PRODUCT DIMENSIONS: 22.00cm x 18.80cm x 2.00cm (8.66" x 7.40" x 0.79" ) W, D, H
  • PRODUCT WEIGHT: 0.2kg (0.5lbs) approx.
  • SHIPPING DIMENSIONS: 25.00cm x 22.50cm x 5.50cm (9.84" x 8.86" x 2.17" ) W, D, H
  • SHIPPING WEIGHT: 0.4kg (0.9lbs) approx.

Why not buy this Kramer DTAXR-OUT4-F32 4 Output 4K HDMI + Analog Audio over HDBaseT Card (F 32) today?

Kramer DTAXR-OUT4-F32 User Manual

Kramer DTAXR-OUT4-F32 Quick Start

Why not buy this Kramer DTAXR-OUT4-F32 4 Output 4K HDMI + Analog Audio over HDBaseT Card (F 32) today?