The HDMI to CAT5 Extender is based on the HDBaseT technology & extends your HD display with the resolutions of 1080p up to 330 feet away from your HDMI or DVI-D source using one CAT5e/6 cable.
HDMI to CAT5 Extender Features:
The HDMI to CAT5 Extender includes a SEND and RECEIVE unit + AC adapter
There are 3 standard Ethernet ports with switching capabilities on each unit. There is no difference between the 3 and any type of connection topology is permitted.
Based upon HDBaseT technology with 3D and 4Kx2K over a single UTP cable up to 330ft
Supports HDMI 1.4 & 3D
Supports HDCP
Supports an uncompressed HDMI signal.
It supports 4K by 2K resolutions for Post Productions, Digital Movie Theaters, CAD/CAM and Video Graphics applications.
Enables HDMI 10.2 Gbps over a single 100m Cat5e/6 cable.
Supports 340MHz/3.4Gbps per channel (10.2Gbps all channel) bandwidth.
Support 1080p@60Hz@48bit pixels
Support 3D pass-through.
Support CEC pass-through.
Supports uncompressed audio such as LPCM.
Supports compressed audio such as DTS Digital, Dolby Digital including DTS-HD and Dolby True HD.
Built-in IR extender function allows IR remote control of Source devices from remote viewing location by sending IR commands received in the vicinity of the Display back to the Source devices.
CAT5e/6 cable follows the standard of IEEE-568B
The HDMI to CAT5 HDBaseT Adapter set are a twisted pair transmitter and receiver for HDMI, 100BaseT Ethernet, bidirectional RS-232 and IR signals. The transmitter converts HDMI, 100BaseT Ethernet, RS-232 and IR input signals to an HDBaseT twisted pair signal. The included receiver converts the HDBaseT signal back to HMDI, 100BaseT Ethernet, RS-232 and IR signals. The HDMI to CAT5 Extender also extends Ethernet and provides an IR back channel to control AV sources using the same CAT5e/6 cable. The three Ethernet ports on both the Sender and Receiver are connected to standard network devices such as 100Base-T routers and hubs.
HDBaseT Supports Full HD Uncompressed Video: HDBaseT delivers uncompressed HD video to a network of devices or as a point-to-point connection. Uncompressed content supports all video sources, including legacy products, accurately renders gaming graphics and features such as Electronic program guides, and does not degrade video quality or add latency. HDBaseT supports TV and PC video formats including standard, enhanced, high-definition and 3D video.
The built-in IR extender function on the HDMI to CAT5 Adapter allows IR remote control of Source devices from remote viewing location by sending IR commands received in the vicinity of the Display back to the Source devices.
Why not buy this HDMI to CAT5 Extender today?
Specs
HDMI to CAT5 Extender Specs:
Input Video Signal: 1.2 volts p-p
Output Video: HDMI
DTV/HDTV: 480i/576i/480p/576p/720p/1080i/1080P
Transmission distance with single Cat5e/6 cable:
100m for1080p/60Hz
Any high definition Dish Network and DirecTV receiver with HDMI outputs
High definition TiVo's with HDMI outputs
Any high definition cable receiver with HDMI outputs
Canadian Rogers, Shaw, Bell ExpressVu and Star Choice receivers with HDMI out, or DVI out with a converter
Any "Over The Air" (OTA) high definition receiver with HDMI outputs
Sony PS3, HD DVD and Blu-ray DVD players
Any Xbox360 with HDMI outputs
Any upconverting DVD player with HDMI outputs
Any DVHS VCR with HDMI outputs
An APPLE TV with HDMI outputs
A Roku with HDMI outputs
A Vudu with HDMI outputs
Many PC video card with HDMI outputs
Any high definition camcorder with an optional type C to standard HDMI cable
Many A/V surround sound receivers with HDMI switching that include the proper chip set. Call your AV receiver supplier to discuss your application or us.
Any 2D HDCP compliant HDTV, monitor and projector. If the source is HDCP compliant and your TV is not, you will not get a picture. Please check your TV manual or the manufacturers web site.
All HDMI 1.3 compliant devices as well as with older 1.0, 1.1, 1.2 and all 1.3 versions
HDTV Supply has this in stock in our California warehouse so place your order at the above ADD TO CART button by 11AM PST and it can ship today or call us at 800-841-9238 to place your order.
HDTV Supply is a leader in supplying 3D equipment for this new, fast growing 3DTV market. Our test lab includes the latest equipment for designing, testing and supporting 3D video equipment. The chips sets we use support the below 3D formats and work with many of our HDMI 1.3 and HDMI 1.4 compliant devices. This HDMI to CAT5 Extender supports these 3D formats:
We not only test this HDMI to CAT5 Extender with lab equipment we also test many of our 3D devices with 3D products you are likely to use. The products used for the test are:
Sony PS3 with the 3D 3.41 firmware
Samsung model PN50C7000YF 3DTV
Samsung model BD-C6900 3D Blu-ray player FORCED to 1080p
Samsung model SSG-P2100T 3D glasses
DirecTV models HR21-100 and the HR24 high definition receiver.
It works with all HDMI devices including the new 3D units.
The 3D viewing results were awesome in our lab and did not have any picture or audio degradation. The normal and standard (2D) results equally exhibited a superb picture quality.
Q/A
Q: How is HDBaseT technology different than others?
A: Unlike other HD distribution technologies, HDBaseT is the only technology which enables CAT5/6/7 connectivity from 70 meters to 100 meters, depending upon the specific product, for uncompressed full HD multimedia content and up to 100 watts of charging power via a single cable. HDBaseT is optimized for video applications and can connect all HDBaseT enabled home entertainment devices. Also, HDBaseT technology has the capacity to deliver double the resolution available today to future 2K and 4K formats. Other existing solutions also require a specific cable and/or a new proprietary connector while HDBaseT utilizes the existing Ethernet infrastructure.
Q: This product has CEC, what is CEC?
A: This product features CEC (Consumer Electronics Control) allowing your HDTV's remote to manage up to ten devices that are connected via HDMI (such as Blu-ray Disc players or home theater receivers) with no special programming needed. For example, you can use your remote to turn on your TV, your player, and your receiver at the same time, and adjust the system volume with one button. All devices must support CEC, though.
Most major TV manufacturers now support CEC, and an HDTV with HDMI 1.3 will likely have the technology. Manufacturers call it by different names; LG Electronics, for instance, calls its implementation SimpleLink, whereas Toshiba calls its version CE-Link. Interoperability isn't mandatory, so some manufacturers limit control to their own products; Sony, for one, allows only Sony-to-Sony communication.
Warranty
HDTV Supply includes a 1 Year Limited U.S. Warranty on this HDMI to CAT5 Extender. The U.S. warranty states that (a) its products will perform substantially in accordance with the accompanying written materials for a period of 1 year from the date of receipt and (b) that the Product will be free from defects in materials & workmanship under normal use & service for a period of 1 year. In order to get a warranty replacement for a defective item, HDTV Supplys Support Team will verify the product is eligible for warranty. An RMA number will then be issued. Shipped replacements will be in like new conditions, tested and all components included. A 30-day RETURN also comes with this warranty.
HDTV Supply also sells a 3 and 5 Year Extended U.S. Warranty for this HDMI to CAT5 Extender. Please go to Extended Warranties or see the above Options to purchase it.
Pictures
Ask a Question
Questions & Answers
Ask a question about the HDMI to CAT5 Extender w/3 Ports to 330' w/one CAT5/6 Cable - HDBaseT or Call 800-841-9238
Software
FAQ
HDTV Supply has created dozens of HDMI extenders over CAT5e/6 with various features for your needs.
If this HDMI to CAT5 Extender doesn't meet your needs see our HDMI over CAT5e/6 comparison spreadsheet for other HDMI to CAT5e/6 extenders with different features or call us right now at 800-841-9238 to discuss your requirements.
OEM
HDMI to CAT5 Extender w/3 Ports to 330' w/one CAT5/6 Cable - HDBaseT
)
HDTV Supply includes a 1 Year Limited U.S. Warranty on this HDMI to CAT5 Extender. The U.S. warranty states that (a) its products will perform substantially in accordance with the accompanying written materials for a period of 1 year from the date of receipt and (b) that the Product will be free from defects in materials & workmanship under normal use & service for a period of 1 year. In order to get a warranty replacement for a defective item, HDTV Supplys Support Team will verify the product is eligible for warranty. An RMA number will then be issued. Shipped replacements will be in like new conditions, tested and all components included. A 30-day RETURN also comes with this warranty.; )
; )
