This HDMI Over IP Network Receiver
allows you to simultaneously send out HDMI 1.3 signals (up to 1080p) to one or more HDMI video projectors or LCD Panels up to 1,000 feet.NOTE:
This product has been discontinued. See the above SIMILAR Tab for equivalent products or, if not there, call us at 800-841-9238 right now to discuss your needs.
HDMI Over IP Network System Features:
This unit is a receiver only and requires a transmitter!
- IR Send / Receive for Remote Control of Source Device from Any Receiver
- Up to 1,000 Foot Runs Via 3 Cascading Ethernet Switches
- Supports Resolutions from 16 x 16 up to 2048 x 2048
- HDCP Compliant
- Integrated Scaler Allows Multiple Resolutions for Different Displays
- 1080p, 1080i, 720p, 480p Video
- Distances to 333 Feet Between Switches; Up to 200 Feet per LAN
- IP Allows Receiver to Find Transmitter in a Network
Return an IR Control Signal to the source using CAT5/6/7 cable over a standard Ethernet infrastructure. The IR send/receive function can be used to remotely control the HDMI source device from any receiver. Multiple control drivers for but not limited to Control4 AMX, & Crestron are available upon request.
The HDMI Over IP Network System can be used to distribute high definition digital content to 100 or more remote displays on a closed loop LAN by cascading Ethernet switches up to 3 levels, allowing the farthest display to be located up to 1,000' away from the 1080p source device while sustaining excellent picture & sound quality.
Each HDMI Over IP Network System is installed using 1 piece of UTP or STP cable. The HDMI signals are transmitted digitally over the CAT5/6/7 cable without any signal loss. Auto adjustment of the internal video compression rate ensures smooth video streaming under different network conditions.
The integrated Scaler function allows different input and output resolutions up to 2048x2048 (different displays can be at different resolutions). The IR send/receive function can be used to remotely control the HDMI source device from any receiver.This is not an HDMI Balun, but an HDMI over IP system. This means you can create your own network and the receiver will find the transmitter automatically. It may even be used over smaller existing house networks.
We highly recommend this HDMI over IP Receiver be used with "Solid" CAT5e or CAT6 Cables.
The HDMI over an IP Network devices support a return IR signal. The Return IR Control function is best suited for a Point-To-Point application, and is of limited value in a Point-To-Many environment. For installations in a Many-To-Many environment it is necessary to use a third party home automation solution to provide distributed remote control functionality.
Why not buy this HDMI Over IP Network Receiver today?