Features
This
HDMI over CAT5 Wallplate
use 2 cables to ~75 feet and deliver pure, rich high definition audio and video. Installation couldn't be simpler. The wallplate set includes a one SEND UNIT and one RECEIVE UNIT and the power comes from the source device as must be provided. 2 - CAT5 cables must be used with this HDMI over CAT5 Wallplate set as the 19 HDMI wires are converted to the 2 - CAT5 cables.
NOTE: This product has been discontinued. See the above SIMILAR Tab for equivalent products or, if not there, call us at 800-841-9238 right now to discuss your needs.
HDMI over CAT5 Wallplate Features:
- Single Port (1P) - White
- The HDMI over CAT5 Wallplate set includes one SEND UNIT and one RECEIVE UNIT.
- The HDMI wallplates have 2-RJ45 connectors on the back - see the More Pictures TAB.
- No AC adapter is needed nor supplied as it powered by pins 18 (+5V) and 17 (Ground) of the HDMI source.
- Bandwidth: 1.65Ghz
- Supports HDMI 1.3, DVI 1.0 and HDCP 1.1
- Video Format Supported: 1080p / 1080i / 720p / 480p / 576i / 480i
- Transmission Distance: (results can vary from one system to another based upon your products)
- 1080p up to 32M Cat6 - STP
- 1080i up to 52M Cat6 - STP
- 720P up to 52M Cat6 - STP
- 480P up to 75M Cat 6 - STP
- 1080p up to 25M Cat5E - UTP
- 1080i up to 38M Cat5E - UTP
- 720P up to 28M Cat5E - UTP
- 480P up to 65M Cat5E - UTP
- Use UTP LAN cable（Cat5E/6） to substitute for an HDMI cable to achieve long distance transmissions.
- Follows the IEEE-568B standard.
- Compact size.
- Each port supports HDMI or DVI inputs (with an HDMI to DVI adapter).
- Size: 114.5mm x 70mm x 29.5mm
- Weight: 0.200Kg
- Power Consumption: 10W (max
- Operating Temperature: 0 to 70 degrees Celsius.
- Operating Humidity: 10% to 85% RH
- Storage Temperature: 0 to 80 degrees Celsius.
- Storage Humidity: 5% to 95% RH
- FCC and CE Approved
NOTE 1: We recommend strongly that you use good CAT5 / 6 cables with any CAT5 / 6 converting products like this one. Most of our "no picture" support calls are due to poor quality and cheap CAT5 cables. Since it is high definition video we only recommend CAT5/6 cables with specs like our CAT-5 /6 cables either bought from us or another high quality supplier. The problems with running HDMI cables in-wall is that the in-wall cables tend to be thicker and harder to work with, some equipment can have range limits shorter than what you require and overall it can get a little expensive. The simple solution is to transmit your HDMI signals over CAT5 or Cat6 cables.
NOTE 2: 2 - CAT5 cables must be used with this HDMI over CAT5 Wallplate as the 19 HDMI wires are converted to the 2 - CAT5 cables.
Also this HDMI over CAT5 Wallplate cannot be used with any other HDMI to CAT5 send or receive units as the send and receive chip sets must be matched.
Why not buy this HDMI over CAT5 Wallplate today?
Q/A
Q: Why do your passive HDMI extenders not work at the specified distance as mentioned in your manuals and spec sheets?
A: We constantly work with many manufacturers on a daily basis to design, recommend, and build solutions that work for everyday HDMI products. However, we do talk to customers who occasionally experience problems when using our passive HDMI extenders such as these or ones that have only one AC adapter, not 2. After doing extensive research and testing in our own lab, we have found that certain A/V receivers, Blu-ray, DVD, and HDMI Blu-Ray players that do not provide enough power (5V) through pin18 of HDMI and therefore causes loss of signal or poor picture quality. This is mainly due to a weak built-in HDMI booster and insufficient power supply.
We have found that these types of sources are limited on the output side and therefore may not work even with a HDMI cable over 10ft. Since our passive extenders rely completely off the power from the HDMI sources, please keep this in mind as equipment can differ due to varying power supplies and different manufacturing standards. For these type of scenarios we recommend either an
active powered extender, or an in-line
HDSync which correctly injects the proper 5V signal on the source side.
Q: Does this HDMI over CAT5 Wallplate support 3D?
A: No, for 2D and 3D please review the specs at
HDMI over CAT5 Converter.
Why not buy this HDMI over CAT5 Wallplate today?
Warranty
HDTV Supply includes a 1 Year Limited U.S. Warranty on this HDMI over CAT5 Wallplate. The U.S. warranty states that (a) its products will perform substantially in accordance with the accompanying written materials for a period of 1 year from the date of receipt and (b) that the HDMI over CAT-5 Wallplate will be free from defects in materials & workmanship under normal use & service for a period of 1 year. In order to get a warranty replacement for a defective item, HDTV Supplys Support Team will verify the product is eligible for warranty. An RMA number will then be issued. Shipped replacements will be in like new conditions, tested and all components included. A 30-day RETURN also comes with this warranty as well as Free Lifetime Tech Support.
HDTV Supply also sells a 3 and 5 Year Extended U.S. Warranty for this HDMI over CAT-5 Wallplates. Please go to
Extended Warranties or see the above Options to purchase it.
Why not buy this HDMI over CAT5 Wallplate today?
Call 833-WOLFPACK (833-965-3722)
)
$29.95
; )
