This Gefen GF-HD48G-1MPO HDMI 2.1 over Fiber Optic Extender Cable complies with HDMI 2.1 standard and supports real 8K/4K UHD resolution. Transmit high quality 8K/4K resolution up to 100 meters (330 ft) using multi-mode optical fiber (with MPO/MTP connectors) without any video signal loss.
Gefen GF-HD48G-1MPO HDMI 2.1 over Fiber Optic Extender Cable Features:
- High-speed & long-distance transmission by optical fiber
- Compatible with HDMI standard v2.1
- Supports OM3 (or OM4) fiber with
- 8 core MPO/MTP connectors
- I2C Data and Hot Plug Detection signal is transmitted by optical fiber
- CEC control, EDID, and HDCP 2.3 premium content protection
- Support for static & dynamic HDR, allowing for extended dynamic range and wide color gamut support
- Supports VRR (Variable Refresh Rate)
- EMI & Safety: CE, FCC
- Optical Source: VCSEL Laser
- O/E Converter: PIN Photo Diode
- Using Fiber: 8-core (or 12-core)
- MPO/MTP fiber optical cable (OM3, 50/125 μm, Polarity type A)
Why not buy this Gefen GF-HD48G-1MPO HDMI 2.1 over Fiber Optic Extender Cable today?
Gefen GF-HD48G-1MPO HDMI 2.1 over Fiber Optic Extender Cable Specifications:
- Transmitter Interfaces
- Inputs: 1 x HDMI (HDMI 2.1) Male
- Embedded Audio Input: HDMI: 8-Channel
- Outputs: 1 x MPO 12-Pin Female
- Receiver Interfaces
- Inputs: 1 x MPO 12-Pin Female
- Outputs: 1 x HDMI (HDMI 2.1) Male
- Embedded Audio Output: HDMI: 8-Channel
- Standards
- HDCP Support: Version 2.3
- EDID Support: Yes
- Transmission
- Max Transmission Distance: 330' / 100.6 m
- Video Format:
- HDMI
- 8K: 60 fps
- UHD 4K: 120 fps
- HDMI (4:4:4)
- DCI 4K: 60 fps
- UHD 4K: 60 fps
- HDMI (12-Bit 4:4:4)
- 1080p: 60 fps
- HDMI
- WUXGA: 60 fps
- DTS Compatibility: DTS-HD Master Audio, DTS:X
- Dolby Compatibility: Dolby Atmos, Dolby TrueHD
- Fiber Center Wavelength: 850 nm
- Power
- Transmitter Power Connector: 1 x Barrel (5 VDC at 2 A) Input
- Receiver Power Connector: 1 x Barrel (5 VDC at 2 A) Input
- Transmitter Power Consumption: (0.95 W)
- Receiver Power Consumption: (0.95 W)
- Environmental
- Operating Temperature: 32 to 122°F / 0 to 50°C
- Storage Temperature: -4 to 158°F / -20 to 70°C
- Operating Humidity: 10 to 80% (Non-Condensing)
- Storage Humidity: 10 to 85% (Non-Condensing)
- General
- Certifications:
- CE, FCC, cULus, RoHS
- *as per Manufacturer
- Transmitter Dimensions: 118.1 x 6.3 x 12.2" / 300 x 16 x 31 cm (Not Including Connectors)
- Receiver Dimensions: 118.1 x 6.3 x 12.2" / 300 x 16 x 31 cm (Not Including Connectors)
- Transmitter Weight: 3.7 oz / 105 g
- Receiver Weight: 3.7 oz / 105 g
Why not buy this Gefen GF-HD48G-1MPO HDMI 2.1 over Fiber Optic Extender Cable today?
Gefen GF-HD48G-1MPO Specifications
Why not buy this Gefen GF-HD48G-1MPO HDMI 2.1 over Fiber Optic Extender Cable today?
1.What maximum transmission distance does this HDMI-over-fiber cable support?
A: This Gefen GF-HD48G-1MPO transmits HDMI signals up to 100 meters (330 ft) over multimode MPO/MTP fiber.
2.Does this cable/passive assembly carry HDCP and EDID information?
A: Yes — the product transmits EDID and supports HDCP 2.3 over the fiber link.
3.Will it pass CEC and remote I2C/Hot Plug signals?
A: Yes — CEC plus I2C data and Hot Plug Detection are transmitted over the optical fiber.
4.What fiber type and connector does the extender require?
A: It uses multimode OM3 (or OM4) MPO/MTP fiber with 8-core (or 12-core) MPO/MTP connectors and polarity type A.
5.Does the product support HDR and Variable Refresh Rate (VRR)?
A: Yes — it supports static and dynamic HDR and also lists support for VRR.
6.What optical transmitter and receiver components does it use?
A: The extender uses a VCSEL laser as the optical source and a PIN photodiode for O/E conversion.
7.What are the power requirements for the transmitter and receiver?
A: Each end uses a 5 VDC barrel power input rated at 2 A; typical power consumption is listed around 0.75–0.95 W.
8.Can I run 8K 60Hz over 100 meters with this cable assembly?
A: Yes — the product lists support for 8K at 60 fps and specifies a transmission distance up to 100 meters (330 ft) over multimode MPO/MTP fiber.
9.Will this pass HDCP 2.3 encrypted content to a downstream display?
A: Yes — HDCP 2.3 is listed as supported for premium content protection.
10.Is there any stated EMI or safety certification for this model?
A: Yes — CE and FCC are listed, and the general certifications section also includes cULus and RoHS.
