DVIGear DVI-7311 Single-Link DVI Fiber Optic Extender, 4x LC is a low-cost, high performance DVI Optical Extender capable of transporting high resolution DVI signals up to 500 meters (1,640 ft.). The unit consists of an optical transmitter module that converts the DVI input signals into light pulses for transmission over 4 strands of multi-mode fiber optic cable, and an optical receiver module that converts the light pulses back to a DVI signal for display on a monitor or projector.
A programmable memory chip in the transmitter module provides EDID support for any display, thereby eliminating the need for copper cables. These features make the DVI-7311 the ideal solution for all display applications that require flawless DVI signal quality over very long cable runs.
DVIGear DVI-7311 Single-Link DVI Fiber Optic Extender, 4x LC
- Supports cable lengths up to 500 meters (1640 ft.)
- Supports HDTV resolutions up to 1080p, and PC resolutions up to 1920x1200
- Optical fiber transmission is immune to environmental signal noise
- Low RFI / EMI profile for sensitive applications
- User-programmable EDID memory, eliminates the need for DDC connection
- Detachable optical cables greatly simplify installation and maintenance.
Why not buy this DVIGear DVI-7311 Single-Link DVI Fiber Optic Extender, 4x LC today?
DVIGear DVI-7311 Single-Link DVI Fiber Optic Extender, 4x LC
| Performance: | |
| Compliance | DVI v1.0 |
| Maximum Pixel Clock Frequency | 165 MHz |
| Maximum Video Bit Rate | 1.65 Gbps (single-link) |
| Supported Color Depth | 8-bit |
| Supported HDTV Formats | 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, and 2048x1080 |
| Supported PC Resolutions | Up to 1600x1200 and 1920x1200 |
| Digital Audio Support | None |
| Connections: | |
| DVI Input / DVI Output | 1x 18+1 DVI-D male connector |
| Optical | 4x LC fiber optic connectors |
| Power Inputs | 1x 3.5mm jack |
| Optical: | |
| Optical Technology / Wavelengths | 4x Discrete Optical Channels |
| Optical Wavelength(s) | 850 nm |
| Optical Transmitter | Tx Module: 4x 850 nm VCSEL, Class 1 laser product |
| Optical Receiver | Rx Module: 4x GaAs PIN Photo Diodes |
| Optical Transmitter Output Power | -8 dBm (minimum) / -3 dBm (maximum) |
| Optical Receiver Input Sensitivity | -18.5 dBm (minimum) / -3 dBm (maximum) |
| Optical Link Power Budget | 9.0 dB (minimum) |
| Cable: | |
| Fiber Cable Type / Max. Length | 50/125μ LC Multi-Mode Fiber with 4x LC connectors / 500 meters |
| DVIGear Fiber Cable | OFNP, Plenum Rated - additional data and custom lengths available on request |
| Cable Jacket | OFNP, Plenum Rated, Black PVC Jacket |
| Cable Outside Diameter | 5.0 mm |
| DDC Support: | |
| EDID Support | An EDID memory built into the Tx module can learn and store the display's EDID info. |
| HDCP Support | HDCP communications are NOT supported! |
| Mechanical: | |
| Construction | High impact plastic enclosure with black satin finish |
| Dimensions (L x W x H) | 2.5" x 1.7" x 0.6" (64.2 mm x 42.6 mm x 15.9 mm) |
| Net Weight | DVI-7311-TX: 1 oz. (28 g) DVI-7311-RX: 1 oz. (28 g) |
| Environmental: | |
| Temperature | Operating: 32˚ to +158˚ F (0˚ to +70˚ C) Storage: -40˚ to +185˚ F (-40˚ to +85˚ C) |
| Humidity | Operating: 5% to 80% (non-condensing) Storage: 5% to 95% (non-condensing) |
| Power Requirements: | |
| Optical Transmitter | Tx module requires at least 320 ma of DC current from pin 14 of DVI (source) connector. Optional external power supply may be used if needed. |
| Optical Receiver | Must be powered using the supplied external power supply |
| External AC Power Adapter | Input: 100-240VAC / 50-60Hz 0.2A Output: 5VDC, 3.0A |
| Power Consumption | DVI-7311-TX: 1.6 watts DVI-7311-RX: 1.4 watts |
| Regulatory Approvals: | |
| Fiber Optic Extender Unit | FCC, CE, RoHS |
| AC Power Adapter | FCC, CE, UL, C-UL, CEC, GS, PSE, RoHS |
| Warranty: | |
| Limited Warranty | 3 Years Parts and Labor |
| Model Numbers: | |
| DVI-7311 | DVI Single-Link Fiber Optic Extender, 4x LC |
| DVI-7311-TX | DVI Single-Link Fiber Optic Transmitter, 4x LC |
| DVI-7311-RX | DVI Single-Link Fiber Optic Receiver, 4x LC |
| DVI-CUST-OPT | 4x LC, Plenum-rated, Single-Link DVI Fiber Optic Cable (length must be specified) |
| Accessories Included: | |
| 1x External AC Power Adapter with USA plug, 1x User Guide | |
| Optional Accessories: | |
| External AC Power Adapter (with USA, Euro, UK, or Australia plugs) for DVI-7311-TX Transmitter unit | |
1.Does the DVI-7311 support HDCP protected content?
A: No — HDCP communications are not supported by the DVI-7311.
2.How far can I run the DVI signal over fiber with this extender?
A: You can run a single-link DVI signal up to 500 meters (1,640 ft.) over 50/125μ multi-mode fiber with 4x LC connectors.
3.What video resolutions does the DVI-7311 support?
A: It supports HDTV formats through 1080p and PC resolutions up to 1920x1200 (single-link).
4.What fiber and DVI connectors does the product use?
A: The units use four LC fiber optic connectors for the optical link and a single 18+1 DVI-D male connector for DVI input/output.
5.Does the package include a power adapter and user guide?
A: Yes — the package lists one external AC power adapter with a USA plug and one user guide.
6.Can I transmit 1080p video 500 meters with this extender?
A: Yes — the DVI-7311 supports HDTV formats up to 1080p and the optical link supports cable runs up to 500 meters over 50/125μ multi-mode fiber.
7.Will this extender carry audio?
A: No — the DVI-7311 does not provide digital audio support.
8.How is EDID handled between the source and display?
A: EDID is handled by a programmable memory chip in the transmitter that can learn and store the display's EDID information.
9.Can the transmitter be powered from the DVI source pin, or do I need an external supply?
A: The transmitter requires at least 320 mA from pin 14 of the DVI connector but an optional external power supply may be used if needed.
10.Does the receiver need its own power supply?
A: Yes — the optical receiver must be powered using the supplied external power supply.

