This DVDO DVDO-RS-3 Simplified Room Solution for Education and Conference Room is The HDBaseT Wall-plate Transmitter supports HDMI and VGA with audio inputs within a standard 2-Gang US Decora wall box. It can transmit HDMI signal over CAT6/6a/7 to the distance up to 131ft/40m for 4K2K@60Hz(4:4:4) or 1080p60Hz up to 230ft/70m. Auto-switching allows user to plug-in and play. Built-in two-way IR, RS-232 and USB transmissions for easy device control.
HDBaseT Receiver: HDMI 2.0b; HDCP 1.4 and 2.2; Video Bandwidth 18Gbps; Audio: LPCM 2/5.1/7.1CH, Dolby Digital, DTS 5.1, Dolby, Digital+, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X
- Inputs: 1x IR INPUT [3.5mm Stereo Mini-jack]
- 1x RS-232 [Phoenix jack]
- 1x HDBaseT IN [RJ45]
- 2× USB [USB Type A]
- 1x SERVICE [Micro USB]
- Outputs: 1x HDMI Type A [19-pin female]
- 1x IR OUTPUT [Phoenix jack]
DVDO DVDO-RS-3 Simplified Room Solution for Education and Conference Room Features:
- HDMI 2.0b 18Gbps, HDCP 2.2 compliant
- Up to 4K2K@60Hz(4:4:4), 4K2K@30Hz, 1080p@120Hz
- Up to 7.1 channel HD audio
- HDBaseT over a single CAT6/6a/7 cable up to 230ft/40m distance for 4K2K@60Hz(4:4:4) or up to 230ft/70m distance for 1080p60Hz
- Built-in scaling for VGA input
- Automatic and manual switching modes
- Two-way IR, RS-232 and USB supported
- 2-Gang US Decora wall plate
- 24V POC is supported
Why not buy this DVDO DVDO-RS-3 Simplified Room Solution for Education and Conference Room today?
DVDO DVDO-RS-3 Transmitter User Manual
DVDO DVDO-RS-3 Receiver User Manual
HDTV Supply partners with DVDO to sell and support all DVDO products
Why not buy this DVDO DVDO-RS-3 Simplified Room Solution for Education and Conference Room today?
Does the RS-3 support HDMI 2.0 and 18 Gbps bandwidth?
A: Yes; the system supports HDMI 2.0b with an 18 Gbps video bandwidth.
What HDCP versions does the RS-3 support?
A: The RS-3 supports HDCP 1.4 and HDCP 2.2.
Can I send control signals across the HDBaseT link so I don’t need separate control wiring?
A: Yes; two-way IR, RS-232 and USB control signals can be transmitted over the HDBaseT link.
Does the RS-3 support Power over Cable (PoC) or POC?
A: Yes; 24V POC (Power over Cable) is supported by the system.
How does source selection work on the transmitter?
A: The transmitter supports automatic (auto) switching and a manual SOURCE button for manual switching.
What physical cable type is required for the HDBaseT link?
A: The system uses a single Cat6/6a/7 UTP cable for the HDBaseT link between transmitter and receiver.
