This DVDO CAT4K-70 4K60 HDMI 70m Extender Over Ethernet with ARC (Tx/Rx) is an extender that can transmit HDMI signals up to 230ft/70m for resolutions up to 4K2K@60Hz 4:4:4, 18Gbps via a single CAT6/6a cable.
The transmitter includes an HDMI loop output that can connect to a local display or to another HDMI extender.
It supports ARC, EDID copy function (you can choose either local or remote EDID) as well as audio formats up to LPCM7.1, Dolby True HD and DTS HD Master.
DVDO CAT4K-70 4K60 HDMI 70m Extender Over Ethernet with ARC (Tx/Rx) Features:
- HDMI 2.0b and HDCP 2.2 compliant
- Supports video resolutions up to 4K2K@60Hz RGB/YCbCr 4:4:4
- Maximum transmission distance: 230ft/70m with CAT6/6a cable
- Can copy EDID from the display connected either to the receiver or to the transmitter’s loopout
- Allows cascading to other HDMI extenders through the HDMI loop out
- ARC and audio de-embedding, audio output through the optical port of the receiver
- HDR, HDR10, HDR10+, Dolby Vision, HLG
- Bi-directional PoC (Tx or Rx)
- Bi-directional IR control
- Compact design for easy and flexible installation
Why not buy this DVDO CAT4K-70 4K60 HDMI 70m Extender Over Ethernet with ARC (Tx/Rx) today?
HDTV Supply partners with DVDO to sell and support all DVDO products
Why not buy this DVDO CAT4K-70 4K60 HDMI 70m Extender Over Ethernet with ARC (Tx/Rx) today?
Does the extender handle HDCP and HDMI 2.0b requirements for protected 4K content?
A: Yes — the product is listed as HDMI 2.0b and HDCP 2.2 compliant.
How does ARC work on this extender and where is the returned audio output?
A: ARC is supported and when enabled the audio returned from an ARC-capable TV connected to the receiver is output through the receiver’s TOSLINK optical port.
What EDID presets are available via the EDID DIP switch on the transmitter?
A: The EDID DIP switch provides four settings: copy EDID from the RX display; preset 4K@60Hz Stereo; preset 1080p Stereo; or copy EDID from the TX HDMI OUT.
If I enable ARC, where does audio come from if my TV also sends ARC audio?
A: If ARC is enabled, audio returned from the ARC-capable TV connected to the receiver is sent out the receiver’s TOSLINK port rather than the transmitter’s HDMI ports.
How far will the IR receiver pick up a remote and at what angles?
A: IR reception distance is up to 8 meters at ±90° and up to 5 meters at ±45° between the remote and the IR receiver.
