The Crown CDi 2|600 is a 2-channel CDi DriveCore install amplifier with 600 watts per channel at 4 ohms with analog inputs.
The CDi DriveCore Series is an evolution in amplification, providing an impressive mix of high-performance; rich feature set, and competitive cost. Using technology derived from our flagship Installed Sound amplifier (Crown DriveCore Install series), the CDi DriveCore 2|600 offers streamlined functionality to work in almost any medium sized installation such as cinema, houses of worship, bars, lounges, and more. Designed for ease-of-use in a variety of applications, the 2|600 is a 2-channel amp that includes network control/monitoring, high-level DSP, front-panel interface, and support for driving up to 100Vrms speaker loads without requiring a transformer. The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.
Minimum Guaranteed Power (1kHz, all channels driven, max distortion 0.5%, duration 0.5 seconds, 120 - 240Vrms - 50/60Hz)
Crown CDi 2|600 Features
- 2 channels with 600 watts at 4 ohms. Crown rates the CDi 2|600 at 600W per channel at 4 ohms and at 8 ohms, with 300W per channel at 2 ohms and at 16 ohms, all channels driven. In bridge mono it is rated at 1200W at 8 ohms and at 16 ohms.
- Direct 70-volt and 100-volt output, no transformer needed. Each output channel can provide 70 Vrms or 100 Vrms for constant-voltage speaker lines. Crown also lists 600W in dual mode at 70 Vrms and 100 Vrms, and 1200W in bridge mono at 140 Vrms and 200 Vrms.
- DriveCore technology. Crown's DriveCore design is meant to cut the number of components in the amplifier, reduce variability, and improve reliability, while keeping a compact, efficient install amplifier.
- Network control with Audio Architect. You can control, configure, and monitor the CDi 2|600 through HARMAN's HiQnet Audio Architect software over a standard TCP/IP network.
- Onboard DSP for install work. DSP includes an input router, input delay up to 1000 ms, 8-band input parametric EQ, a crossover, 8-band output parametric EQ, output delay up to 100 ms, and a LevelMAX limiter.
- Front-panel setup and GPIO/AUX control. Crown says you can fully configure the amplifier from the front panel. The GPIO/AUX port can recall presets, mute channels, monitor faults, and power the unit on or off.
- JBL speaker tunings included. The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.
- Ships with the latest firmware. Crown publishes CDi DriveCore firmware, which is updated through HARMAN's HiQnet Audio Architect software.
- 3-year manufacturer warranty. Crown's published warranty for this model is 3 years when purchased new from an authorized Harman Professional dealer in the United States. The warranty is not transferable. See Crown's warranty policy for full terms.
- Free USA Insured Shipping. This item ships free to US addresses with insured UPS Ground. Paid 2-day, 3-day, and overnight upgrades are available at checkout. International orders are charged shipping.
Where the CDi 2|600 Fits
Medium rooms such as cinemas, houses of worship, bars, and lounges: Crown positions the CDi 2|600 for medium sized installations that need a compact amplifier with 70-volt or 100-volt capability.
Installed systems that need DSP and network control: Onboard DSP, front-panel setup, GPIO/AUX, and Audio Architect control cover everyday install tasks without a separate processor in many rooms.
When you want BLU link instead: Choose the CDi 2|600BL if you need HARMAN's 256-channel BLU link audio bus. The CDi 2|600 itself is analog input only and does not include BLU link.
Why not buy this Crown CDi 2|600 Power Amplifier today?
Crown CDi 2|600 Specifications
- Model: CDi 2|600
- SKU: Crown-CDi2x600
- Manufacturer part number: CDi2x600 (distributor code NCDI2X600-U-US)
- Type: Analog input, 2 channel, 600W per output channel
- BLU link: No
- Channels: 2
- Rated power output (per channel at 4 ohms): 600W
- Dual-mode power, all channels driven: 300W at 2 ohms; 600W at 4 ohms; 600W at 8 ohms; 300W at 16 ohms; 600W at 70 Vrms; 600W at 100 Vrms. Crown states these as minimum guaranteed power at 1 kHz, all channels driven, max distortion 0.5%, duration 0.5 seconds, 120-240 Vrms, 50/60 Hz.
- Bridge mono power, all channels driven: 600W at 4 ohms; 1200W at 8 ohms; 1200W at 16 ohms; 1200W at 140 Vrms; 1200W at 200 Vrms. Same test conditions as above.
- Sensitivity (for full rated power at 8 ohms): 0.7V RMS
- THD (full rated power, 20 Hz-20 kHz): 0.35%
- Damping factor (20 Hz to 100 Hz): > 1000
- Frequency response (8 ohms, 20 Hz-20 kHz): +/-0.5dB
- Crosstalk (below rated power, 20 Hz to 1 kHz): > 80dB
- Input impedance: 20 k ohms balanced, 10 k ohms unbalanced
- Power supply connector: "Standard IEC type 320 inlet for detachable connector 100 - 240V~"
- Analog input signal-to-noise ratio (ref. rated power, 100V, 20 Hz-20 kHz, at 8 ohms): greater than 104 dB (official CDi DriveCore cut sheet, all models in this series)
- Unit dimensions (official CDi DriveCore cut sheet): 19 x 3.5 x 12.25. Depth does not include the 1.3 inch front panel protrusion. Source: official CDi DriveCore cut sheet.
- Official unit weight: 14.56 lbs (6.6 kg)
- Shipping weight and carton: 19 lb; 19 x 22 x 8 in
- Warranty: 3-year manufacturer warranty as published by Crown for this model
- UPC: 691991006401
- Country of origin: CN
- TAA: Non Compliant
Specifications above that describe electrical performance, unit size, and unit weight are from Crown's official CDi 2|600 product page or official series data sheet. Call 833-WOLFPACK (833-965-3722) if you need help confirming a figure.
Why not buy this Crown CDi 2|600 Power Amplifier today?
How to Control the CDi 2|600
- Front panel: Crown says you can completely configure the amplifier using the front-panel interface.
- Network software: HARMAN HiQnet Audio Architect, over a standard TCP/IP network, for control, configuration, and monitoring.
- GPIO/AUX port: Recall presets, mute channels, monitor faults, and power the amplifier on or off.
This analog-input CDi 2|600 does not include BLU link. The CDi 2|600BL is the model that adds HARMAN's 256-channel, fault-tolerant BLU link audio bus.
Why not buy this Crown CDi 2|600 Power Amplifier today?
Crown CDi 2|600 Manuals
These are the official Crown documents, hosted here for convenient download. Other drawings, power-draw sheets, or translations may also be listed on Crown's CDi 2|600 product page.
Need a copy now? Call 833-WOLFPACK (833-965-3722) and we will email the official manual to you.
Why not buy this Crown CDi 2|600 Power Amplifier today?
Crown CDi 2|600 Power Amplifier Q&A
How much power does the CDi 2|600 provide per channel?
How much power does the CDi 2|600 provide per channel?
Crown rates the CDi 2|600 at 600W per channel at 4 ohms and at 8 ohms. It is also rated at 300W per channel at 2 ohms and at 16 ohms, all channels driven. In bridge mono, Crown rates it at 1200W at 8 ohms and at 16 ohms.
Can the CDi 2|600 drive 70-volt or 100-volt speakers without a transformer?
Can the CDi 2|600 drive 70-volt or 100-volt speakers without a transformer?
Yes. Each output channel can provide 70 Vrms or 100 Vrms, so you do not need a separate transformer for those constant-voltage speaker lines. Crown rates 600W in dual mode at 70 Vrms and 100 Vrms.
Does the CDi 2|600 include BLU link?
Does the CDi 2|600 include BLU link?
No. The CDi 2|600 is an analog-input model and does not include BLU link. BLU link is on the BL models only, such as the CDi 2|600BL.
Can I control the CDi 2|600 over a network?
Can I control the CDi 2|600 over a network?
Yes. Crown says you can control, configure, and monitor the CDi DriveCore through HARMAN's HiQnet Audio Architect software over a standard TCP/IP network. You can also configure the amplifier from the front panel, and use the GPIO/AUX port for presets, muting, fault monitoring, and power on or off.
What DSP is built into the CDi 2|600?
What DSP is built into the CDi 2|600?
Onboard DSP includes an input router, input delay up to 1000 ms, an 8-band input parametric EQ, a crossover, an 8-band output parametric EQ, output delay up to 100 ms, and a LevelMAX limiter. The CDi DriveCore line also comes pre-loaded with JBL speaker tunings.
What is the official unit weight of the CDi 2|600?
What is the official unit weight of the CDi 2|600?
Crown's official specifications list a unit weight of 14.56 lbs (6.6 kg). Official unit dimensions: 19 x 3.5 x 12.25 inches (W x H x D). Depth does not include the 1.3 inch front panel protrusion. Source: official CDi DriveCore cut sheet.
What warranty comes with the CDi 2|600?
What warranty comes with the CDi 2|600?
Crown's published Limited Product Warranty, updated August 2025, lists 3 years for this model when purchased new from an authorized Harman Professional dealer in the United States. The warranty is not transferable. Call 833-WOLFPACK (833-965-3722) if you have questions.
Does Crown publish firmware for the CDi 2|600?
Does Crown publish firmware for the CDi 2|600?
Crown publishes CDi DriveCore firmware, which is updated through HARMAN's HiQnet Audio Architect software.
Where can I buy the Crown CDi 2|600 online?
Where can I buy the Crown CDi 2|600 online?
You can buy the Crown CDi 2|600 from HDTV Supply at hdtvsupply.com. It ships free to US addresses with insured UPS Ground, and paid 2-day, 3-day, and overnight upgrades are available at checkout. Questions before you order? Call 833-WOLFPACK (833-965-3722) or use Chat With an AV Expert.
Is the Crown CDi 2|600 a good amplifier for cinema or houses of worship?
Is the Crown CDi 2|600 a good amplifier for cinema or houses of worship?
Yes. Crown designed the CDi DriveCore 2|600 for medium installations such as cinema, houses of worship, bars, and lounges. It can drive speaker loads up to 100Vrms without a transformer, and the CDi DriveCore line comes pre-loaded with JBL speaker tunings. Call 833-WOLFPACK (833-965-3722) or use Chat With an AV Expert on hdtvsupply.com.
Crown CDi 2|600 vs CDi 2|600BL: which should I buy?
Crown CDi 2|600 vs CDi 2|600BL: which should I buy?
They have the same channel count and power rating. The BL version adds HARMAN's BLU link, so it can send and receive audio channels over the BLU link digital audio bus. If your system is all analog, the CDi 2|600 keeps it simple. If you are tying into other BLU link gear, choose the CDi 2|600BL.
Can HDTV Supply help me design a system with the CDi 2|600?
Can HDTV Supply help me design a system with the CDi 2|600?
Yes. We offer free system design help. Tell us about your rooms, speakers, and sources, and we will help you confirm the right Crown amplifier, wiring, and accessories before you buy. Call 833-WOLFPACK (833-965-3722) or use Chat With an AV Expert on hdtvsupply.com.
