Crown CDi 2|300 Two-channel, 300W @ 4 ohms Analog Power Amplifier, 70V/100V

Crown

$1,798.00
Part Number:
Crown-CDi2x300
UPC:
691991006418
Condition:
New
Availability:
In Stock
1:
2-channel, 300W per channel at 4 ohms
2:
Direct 70V/100V output, no transformer needed
3:
Onboard DSP and HiQnet Audio Architect network control
4:
Pre-loaded JBL speaker tunings
5:
Free USA Insured Shipping
6:
3-year manufacturer warranty
7:
Ships with the latest firmware

The Crown CDi 2|300 is a 2-channel DriveCore install amplifier with 300 watts per channel at 4 ohms. Crown designed it for small and medium installations such as restaurants, retail stores, and similar rooms. It includes network control and monitoring, onboard DSP, a front-panel interface, and direct 70-volt or 100-volt output, so you do not need a transformer for those speaker lines. The CDi DriveCore line comes pre-loaded with JBL speaker tunings to help speed up installation.

The CDi 2|300 uses Crown's DriveCore technology, which Crown says eliminates hundreds of components inside the amplifier to reduce variability, increase reliability, and keep the design efficient. You can control, configure, and monitor the amplifier over a standard TCP/IP network with HARMAN's HiQnet Audio Architect software. This analog-input model does not include BLU link. That digital bus is on the BL models only, such as the CDi 2|300BL.

Onboard DSP includes an input router, input delay up to 1000 ms, an 8-band input parametric EQ, a crossover, an 8-band output parametric EQ, output delay up to 100 ms, and a LevelMAX limiter. A combined GPIO/AUX port can be used to recall presets, mute channels, monitor faults, and power the amplifier on or off.

READ MORE

Crown CDi 2|300 Features

  • 2 channels with 300 watts at 4 ohms. Crown rates the CDi 2|300 at 300 watts per channel at 4 ohms and at 8 ohms, with 150 watts per channel at 2 ohms and at 16 ohms, all channels driven. In bridge mono it is rated at 600 watts at 8 ohms and at 16 ohms.
  • Direct 70-volt and 100-volt output, no transformer needed. Each output channel can provide 70 Vrms or 100 Vrms for constant-voltage speaker lines. Crown also lists 300 watts in dual mode at 70 Vrms and 100 Vrms, and 600 watts in bridge mono at 140 Vrms and 200 Vrms.
  • DriveCore technology. Crown's DriveCore design is meant to cut the number of components in the amplifier, reduce variability, and improve reliability, while keeping a compact, efficient install amplifier.
  • Network control with Audio Architect. You can control, configure, and monitor the CDi 2|300 through HARMAN's HiQnet Audio Architect software over a standard TCP/IP network.
  • Onboard DSP for install work. DSP includes an input router, input delay up to 1000 ms, 8-band input parametric EQ, a crossover, 8-band output parametric EQ, output delay up to 100 ms, and a LevelMAX limiter.
  • Front-panel setup and GPIO/AUX control. Crown says you can fully configure the amplifier from the front panel. The GPIO/AUX port can recall presets, mute channels, monitor faults, and power the unit on or off.
  • JBL speaker tunings included. The entire CDi DriveCore line comes pre-loaded with JBL speaker tunings to help make installations quicker and easier.
  • Ships with the latest firmware. Crown publishes CDi DriveCore firmware, which is updated through HARMAN's HiQnet Audio Architect software.
  • 3-year manufacturer warranty. Crown's published warranty for this model is 3 years when purchased new from an authorized Harman Professional dealer in the United States. The warranty is not transferable. See Crown's warranty policy for full terms.
  • Free USA Insured Shipping. This item ships free to US addresses with insured UPS Ground. Paid 2-day, 3-day, and overnight upgrades are available at checkout. International orders are charged shipping.

Where the CDi 2|300 Fits

Restaurants, retail, and other small to medium rooms: Crown positions the CDi DriveCore 2|300 for small and medium installations that need a compact 2-channel amplifier with 70-volt or 100-volt capability.

Installed systems that need DSP and network control: Onboard DSP, front-panel setup, GPIO/AUX, and Audio Architect control cover everyday install tasks without a separate processor in many rooms.

When you want BLU link instead: Choose the CDi 2|300BL if you need HARMAN's 256-channel BLU link audio bus. The CDi 2|300 itself is analog input only and does not include BLU link.

Why not buy this Crown CDi 2|300 Power Amplifier today?

Crown CDi 2|300 Specifications

  • Model: CDi 2|300
  • SKU: Crown-CDi2x300
  • Manufacturer part number: CDi2x300 (distributor code NCDI2X300-U-US)
  • Type: Analog input, 2-channel DriveCore install amplifier
  • BLU link: No
  • Channels: 2
  • Rated power output (per channel at 4 ohms): 300W
  • Dual-mode power, all channels driven: 150W at 2 ohms; 300W at 4 ohms; 300W at 8 ohms; 150W at 16 ohms; 300W at 70 Vrms; 300W at 100 Vrms. Crown states these as minimum guaranteed power at 1 kHz, all channels driven, max distortion 0.5%, duration 0.5 seconds, 120-240 Vrms, 50/60 Hz.
  • Bridge mono power, all channels driven: 300W at 4 ohms; 600W at 8 ohms; 600W at 16 ohms; 600W at 140 Vrms; 600W at 200 Vrms. Same test conditions as above.
  • Sensitivity (for full rated power at 8 ohms): 0.7V RMS
  • Analog input signal-to-noise ratio (ref. rated power, 100V, 20 Hz-20 kHz, at 8 ohms): greater than 104 dB
  • THD (full rated power, 20 Hz-20 kHz): 0.35%
  • Damping factor (20 Hz to 100 Hz): greater than 1000
  • Frequency response (8 ohms, 20 Hz-20 kHz): +/- 0.5 dB
  • Crosstalk (below rated power, 20 Hz to 1 kHz): greater than 80 dB
  • Input impedance: 20 kΩ balanced, 10 kΩ unbalanced
  • Unit dimensions (W x H x D, inches): 19 x 3.5 x 12.25. Depth does not include the 1.3 inch front panel protrusion. Source: official CDi 2|300 specifications.
  • Official unit weight: 14.56 lbs (6.6 kg)
  • Shipping weight and carton: 19 lb; 19 x 22 x 8 in
  • Power supply connector: Standard IEC type 320 inlet for a detachable connector, 100-240V
  • Warranty: 3-year manufacturer warranty as published by Crown for this model
  • UPC: 691991006418
  • Country of origin: CN
  • TAA: Non Compliant

Specifications above that describe electrical performance, unit size, and unit weight are from Crown's official CDi 2|300 product page. Call 833-WOLFPACK (833-965-3722) if you need help confirming a figure.

Why not buy this Crown CDi 2|300 Power Amplifier today?

How to Control the CDi 2|300

  • Front panel: Crown says you can completely configure the amplifier using the front-panel interface.
  • Network software: HARMAN HiQnet Audio Architect, over a standard TCP/IP network, for control, configuration, and monitoring.
  • GPIO/AUX port: Recall presets, mute channels, monitor faults, and power the amplifier on or off.

This analog-input CDi 2|300 does not include BLU link. The CDi 2|300BL is the model that adds HARMAN's 256-channel, fault-tolerant BLU link audio bus.

Why not buy this Crown CDi 2|300 Power Amplifier today?

Crown CDi 2|300 Manuals

These are the official Crown documents, hosted here for convenient download. A power draw and thermal sheet, a JBL speaker-tuning white paper, and a comparison chart are also listed on Crown's CDi 2|300 product page.

Need a copy now? Call 833-WOLFPACK (833-965-3722) and we will email the official manual to you.

Why not buy this Crown CDi 2|300 Power Amplifier today?

Crown CDi 2|300 Power Amplifier Q&A

How much power does the CDi 2|300 provide per channel?

How much power does the CDi 2|300 provide per channel?

Crown rates the CDi 2|300 at 300 watts per channel at 4 ohms and at 8 ohms. It is also rated at 150 watts per channel at 2 ohms and at 16 ohms, all channels driven. In bridge mono, Crown rates it at 600 watts at 8 ohms and at 16 ohms.

Can the CDi 2|300 drive 70-volt or 100-volt speakers without a transformer?

Can the CDi 2|300 drive 70-volt or 100-volt speakers without a transformer?

Yes. Each output channel can provide 70 Vrms or 100 Vrms, so you do not need a separate transformer for those constant-voltage speaker lines. Crown rates 300 watts in dual mode at 70 Vrms and 100 Vrms.

Does the CDi 2|300 include BLU link?

Does the CDi 2|300 include BLU link?

No. The CDi 2|300 is an analog-input model and does not include BLU link. BLU link is on the BL models only, such as the CDi 2|300BL, which can send and receive channels over HARMAN's 256-channel, fault-tolerant BLU link audio bus.

Can I control the CDi 2|300 over a network?

Can I control the CDi 2|300 over a network?

Yes. Crown says you can control, configure, and monitor the CDi DriveCore through HARMAN's HiQnet Audio Architect software over a standard TCP/IP network. You can also configure the amplifier from the front panel, and use the GPIO/AUX port for presets, muting, fault monitoring, and power on or off.

What DSP is built into the CDi 2|300?

What DSP is built into the CDi 2|300?

Onboard DSP includes an input router, input delay up to 1000 ms, an 8-band input parametric EQ, a crossover, an 8-band output parametric EQ, output delay up to 100 ms, and a LevelMAX limiter. The CDi DriveCore line also comes pre-loaded with JBL speaker tunings.

What is the official unit weight of the CDi 2|300?

What is the official unit weight of the CDi 2|300?

Crown's official CDi 2|300 specifications list a unit weight of 14.56 lbs (6.6 kg). Unit dimensions are 19 x 3.5 x 12.25 inches (W x H x D), with depth not including the 1.3 inch front panel protrusion.

What warranty comes with the CDi 2|300?

What warranty comes with the CDi 2|300?

Crown's published Limited Product Warranty, updated August 2025, lists 3 years for all Crown models other than I-Tech HD, V-Rack, and XLi, when purchased new from an authorized Harman Professional dealer in the United States. The warranty is not transferable. Call 833-WOLFPACK (833-965-3722) if you have questions.

What is the frequency response of the CDi 2|300?

What is the frequency response of the CDi 2|300?

Crown lists a frequency response of ±0.5 dB (8 ohms, 20 Hz-20 kHz).

Where can I buy the Crown CDi 2|300 online?

Where can I buy the Crown CDi 2|300 online?

You can buy the Crown CDi 2|300 from HDTV Supply at hdtvsupply.com. It ships free to US addresses with insured UPS Ground, and paid 2-day, 3-day, and overnight upgrades are available at checkout. Questions before you order? Call 833-WOLFPACK (833-965-3722) or use Chat With an AV Expert.

Is the Crown CDi 2|300 a good amplifier for restaurants or retail stores?

Is the Crown CDi 2|300 a good amplifier for restaurants or retail stores?

Yes. Crown designed the CDi DriveCore 2|300 for small and medium installations such as restaurants and retail stores. It can drive speaker loads up to 100Vrms without a transformer, and the CDi DriveCore line comes pre-loaded with JBL speaker tunings. Call 833-WOLFPACK (833-965-3722) or use Chat With an AV Expert on hdtvsupply.com.

Crown CDi 2|300 vs CDi 2|300BL: which should I buy?

Crown CDi 2|300 vs CDi 2|300BL: which should I buy?

They have the same channel count and power rating. The BL version adds HARMAN's BLU link, so it can send and receive audio channels over the BLU link digital audio bus. If your system is all analog, the CDi 2|300 keeps it simple. If you are tying into other BLU link gear, choose the CDi 2|300BL.

Can HDTV Supply help me design a system with the CDi 2|300?

Can HDTV Supply help me design a system with the CDi 2|300?

Yes. We offer free system design help. Tell us about your rooms, speakers, and sources, and we will help you confirm the right Crown amplifier, wiring, and accessories before you buy. Call 833-WOLFPACK (833-965-3722) or use Chat With an AV Expert on hdtvsupply.com.