This CAD Audio AMC105-2-19 Omnidirectional Dynamic Gooseneck Microphone is a cost effective, push button, omnidirectional dynamic designed specially for fixed or gooseneck mounting in quality sound installations.
These microphones are extremely rugged and reliable and will stand up under the most strenuous handling conditions to provide years of dependable service.
A smooth wide band frequency response with a slight "presence" boost at 2 kHz gives a natural, crisp and highly intelligible sound.
CAD Audio AMC105-2-19 Omnidirectional Dynamic Gooseneck Microphone Features:
- Omnidirectional Dynamic Microphone
- 1 DPDT Push-to-Talk Switch
- 19" Gooseneck
- 2 3/4" Flange and 6' Cable - Chrome
Why not buy this CAD Audio AMC105-2-19 Omnidirectional Dynamic Gooseneck Microphone form HDTV Supply today?
CAD Audio AMC105-2-19 Omnidirectional Dynamic Gooseneck Microphone Specifications:
- Operating Principle: Moving Coil Dynamic
- Polar Pattern: Omnidirectional
- Frequency Response: 150Hz - 10KHz
- Sensitivity: -56 dBV (1.6 mV) @ 1 Pa
- Impedance: 550 ohms
Why not buy this CAD Audio AMC105-2-19 Omnidirectional Dynamic Gooseneck Microphone form HDTV Supply today?
What is the AMC105-2-19 and what is it designed for?
A: The CAD Audio AMC105-2-19 Omnidirectional Dynamic Gooseneck Microphone is a 19-inch omnidirectional dynamic gooseneck microphone. The product is specified for moving-coil dynamic element and is intended to address the audio requirements described for this model.
The product page describes this model specifically around these capabilities, so it should be specified according to the application rather than treated as a generic audio device.
What type of audio device is the AMC105-2-19?
A: The CAD Audio AMC105-2-19 Omnidirectional Dynamic Gooseneck Microphone uses the design described as a 19-inch omnidirectional dynamic gooseneck microphone. Its product-specific configuration includes omnidirectional pickup, which defines how it captures, transmits, monitors, or routes audio.
This configuration is intended to provide the signal behavior expected from the model in its stated professional audio use.
What are the main audio or pickup characteristics of the AMC105-2-19?
A: The key signal characteristics include 150 Hz to 10 kHz frequency response. These characteristics determine how the product handles the intended sound source or monitoring workflow.
Using the appropriate pickup or signal configuration helps maintain consistent audio capture and makes the product easier to match to the surrounding system.
What frequency or operating range does the AMC105-2-19 support?
A: The operating specification listed for the CAD Audio AMC105-2-19 Omnidirectional Dynamic Gooseneck Microphone includes 150 Hz to 10 kHz frequency response. Users should follow the stated operating range for the intended system configuration.
Where a wireless frequency band is listed, the system should be operated in accordance with applicable local frequency regulations and the compatible transmitter/receiver configuration.
What controls or signal-management features are provided?
A: The product includes -56 dBV (1.6 mV) at 1 Pa. These controls or operating features help the user configure the microphone or audio system for the application.
These features allow the user to adapt the unit to the source, room, performance, or installation requirements without changing the basic product architecture.
What connectivity or accessories are included with the AMC105-2-19?
A: The CAD Audio AMC105-2-19 Omnidirectional Dynamic Gooseneck Microphone is supplied with or provides fixed/gooseneck installations. The exact connection method and included accessories depend on this model configuration.
Using the supplied or specified accessories helps preserve compatibility and ensures the product is connected as intended by the manufacturer.
What applications is the AMC105-2-19 suited for?
A: The CAD Audio AMC105-2-19 Omnidirectional Dynamic Gooseneck Microphone is suited to the applications described for this model, including studio, live sound, or fixed installation. Its design focuses on the requirements identified for this specific product.
The combination of the product construction and stated features makes it appropriate for the professional audio environments identified for the model.
How does the AMC105-2-19 support reliable operation?
A: Reliable operation is supported by features such as omnidirectional pickup. For wireless models, correct frequency coordination and receiver/transmitter setup should be followed; for wired models, appropriate signal and power connections should be used.
Correct setup, suitable cabling, and proper frequency coordination where applicable are important for dependable day-to-day performance.
What should users consider when integrating the AMC105-2-19?
A: When integrating the CAD Audio AMC105-2-19 Omnidirectional Dynamic Gooseneck Microphone, users should match the product pickup pattern, frequency range, connection type, and included accessories to the rest of the audio chain. The listed specifications should be used as the reference for system design.
Before installation, verify the connector type, power requirements, wireless band where applicable, and the receiving equipment input requirements.
What are the key technical features to consider when specifying the AMC105-2-19?
A: Key specification points include moving-coil dynamic element, omnidirectional pickup, 150 Hz to 10 kHz frequency response, -56 dBV (1.6 mV) at 1 Pa. These details are the most relevant when comparing the model with other audio products or selecting it for a particular installation.
Together, these specifications define the intended operating characteristics of the model and provide the technical basis for selecting it for a project.
