Bolin Technology EG40F EDGE Series FAST HEVC Decoder Features:

Support up to 4K60
Hardware FPGA based codec, high-quality image with ultra low latency and low bandwidth
Back compatible with standard HEVC codec but no Ultra-Low-Latency
HDMI 2.0 + 12G-SDI video output
True Dual-Output
All video with audio embedded
Support PTZ control
Audio intercom with frontend device
On-screen character generator
Firmware upgrade via IP
POE+ and 12VDC power input

Why not buy this Bolin Technology EG40F EDGE Series FAST HEVC Decoder today?

Encoder/Decoder: Decoder only
Decoder (Video Output): HDMI & SDI
Video Codec: AVC-H.264 / HEVC-H.265 selectable
Codec Platform: Hardware FPGA FAST HEVC codec
Video Resolutions: 3840 x 2160P @60/59.94/50/30/29.97/25/24/23.98 1920 x 1080P @60/59.94/50/30/29.97/25/24/23.98 1920 x 1080i @60/59.94/50 1280 x 720P @60/59.94/50/30/29.97/25
Color Space(HDMI): 4K60: RGB 8bit, YUV444 8bit, YUV422 12bit, YUV420 8bit/10bit 4K30 & below: RGB 8bit/10bit, YUV444 8bit/10bit, YUV422 12bit
Audio Formats: 3.5mm Jack, analog audio, stereo (unbalanced); Line in/out - audio intercom, Line out - HDMI audio output
Video Streaming: 1 stream
Control Protocol: Visca serial control (RS422), Visca over IP
Latency (Results may vary depending on network configuration and management settings): A: <2 frame (e.g. 2160p60 latency is < 30 ms between encoder and decoder)
B: <1.5 frame (e.g. 1080p60 latency is < 15 ms between encoder and decoder)
Bandwidth (Results may vary depending on network configuration and management settings): A: 4kp60 4:2:2/12bit; 20-50Mbps
B: 1080p60 4:2:2/12bit; 10-25Mbps
Ecosystem Friendly: A: AVC-H.264/HEVC-H.265 Open Platform, compatible with standard AVC/HEVC software/hardware decoder
B: Video codec is compatible with decoding standard AVC/HEVC, H.264/265 to output video without having low latency; Pair up with Fast HEVC encoder to decode output extremely low latency video.