The Blustream UEX3H is a USB 3.2 Gen1 HDBaseT extender that transmits USB signals up to 100m over CAT6A with 5Gbps shared bandwidth, supporting dual-host switching, USB 2.0/1.1 backward compatibility, bi-directional PoC, and flexible auto/manual control via front panel or RS-232 for extending USB peripherals such as cameras, KVMs, audio devices, and storage.
Blustream UEX3H USB 3.2 Gen1 HDBaseT Extender - Host Features:
- USB 3.2 Gen1 HDBaseT Extender supporting 2 x USB Host devices and 2 x local USB Devices
- Supports USB 3.2 signal extension up to 100m over HDBaseT *
- Backwards compatible with USB 2.0 & 1.1 devices
- Combined USB3.2 Gen1 data transfer rate up to 5Gbps *
- 1 x USB-A & 1 x USB-C port for connection to host devices with manual or auto switching
- 2 x USB-A ports for connection to local devices
- 1 x USB-C host charging port for connection of external power supply to power host device
- Provides up to 500mA combined power to USB devices (up to 500mA per single USB port)
- Configurable USB device power management via API commands
- Bi-directional PoC (Power over Cable) to power extenders from either the host or device unit (supports 12-48V PoC)
- Supports bi-directional RS-232 when used with compatible HDBaseT products
- PoC function can be enabled/disabled via dipswitch
- Simple plug and play, no driver installation or setup required
Why not buy this Blustream UEX3H USB 3.2 Gen1 HDBaseT Extender - Host form HDTV Supply today?
Blustream UEX3H USB 3.2 Gen1 HDBaseT Extender - Host Specification
- CAT Connectors: 1 x RJ45 connector
- USB Host Ports: 1 x USB Type C female, 1 x USB Type A female
- USB Device Ports: 2 x USB Type C female
- USB-C Charging Port: 1 x USB Type C female (provides charging for USB-C host)
- Local power input: 1 x 2-Pin Phoenix connector
- Firmware Upgrade: 1 x Micro-USB
- RS-232: 1 x 3-Pin Phoenix connector
- Power Supply: 24V/1.5A DC
- Dimensions (W x D x H ): 133mm x 120mm x 22mm
- Shipping Weight: 1.0kg
- Operating Temperature: 32°F to 104°F (-5°C to +55°C)
- Storage Temperature : -4°F to 140°F (-25°C to +70°C)
Why not buy this Blustream UEX3H USB 3.2 Gen1 HDBaseT Extender - Host form HDTV Supply today?
Why not buy this Blustream UEX3H USB 3.2 Gen1 HDBaseT Extender - Host form HDTV Supply today?
Which hosts and device units is the UEX3H compatible with?
A: The UEX3H is compatible with Blustream UEX3D and UEX3D-WP device units and supports two USB Host inputs switched to local or remote devices.
What host and device ports are on the UEX3H?
A: The UEX3H provides 1 USB-C and 1 USB-B host port, plus two local USB-A device ports and a USB-C charging/pass-through port.
Can the UEX3H be powered over the HDBaseT link?
A: Yes. The UEX3H supports bi-directional Power over Cable (PoC) and the PoC function can be enabled or disabled with a dipswitch.
Can I control host selection with RS-232 or front-panel buttons?
A: Yes. Host selection can be switched manually via the front-panel Select button (press/hold to toggle auto/manual) or remotely by RS-232 commands.
Can I extend USB 3.2 Gen1 signals 100 meters with this product?
A: Yes. The UEX3H supports USB 3.2 Gen1 signal extension up to 100m over a single CAT6A HDBaseT link when used with a compatible Blustream Device unit.
Will the UEX3H pass laptop charging through its USB-C port?
A: The UEX3H provides a USB-C power pass-through port to deliver a host device's original power supply to the USB-C host, but the manual warns not to connect power to both pass-through ports simultaneously.
How do I switch between Host 1 and Host 2 on the UEX3H?
A: Press the front-panel Select button to toggle between Host 1 and Host 2; press and hold for three seconds to switch between auto and manual switching modes, or send RS-232 host-switch commands.
What USB data speed can I expect over the HDBaseT link?
A: The UEX3H supports combined USB 3.2 Gen1 data transfer bandwidth up to 5Gbps and is backwards compatible with USB 2.0 and 1.1 devices.
What category cable should I use between the host and device units for best results?
A: Use a minimum of CAT6A straight (pin-to-pin) cable wired to the T568B standard; the manual specifically recommends CAT6A for longer distances and higher EMI areas.
